Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Exterior Body: Front of unit is provided with curved
thermopane glass of 1.00” (2.54 cm) overall thickness with
(2) tempered glass panes (outer pane) 0.25” (0.64 cm), (inner
pane) 0.18 (0.48 cm). Each side of glass is trimmed with black
polyethylene extrusion formed to match the curvature of the
glass front. Base of cabinet is 18-gauge stainless steel over
14-gauge galvanized steel bottom structure. Exterior top of
display case is constructed of 18-gauge stainless steel. Exterior
sides are finished with stainless steel. Unit is completely
insulated with 1.50” (3.8 cm) polyurethane environmentally
friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming Potential) insulation.
Adjustable feet allow for leveling.
Doors: Unit is provided with two self-closing, thermopane
glass doors in a thermoplastic frame/track. Doors are easily
removable for cleaning and are featured with a hold open
mechanism for easy loading, and a lock for night storage.
Interior Cabinet is constructed of 18-gauge stainless steel
top and bottom. Interior sides are ABS material covered with
mirrors. Two beige epoxy coated shelves are provided and
have adjustable shelf supports. Interior is lighted with three
(120v-60c-1ph) fluorescent lights, and two adjust with shelves,
with separate on/off switch.
Refrigeration: The condensing unit and blower coil evaporator
system (HFC404A) 115v-60c-1ph, is housed in base of unit. Unit
is designed to maintain temperatures of 36º - 40ºF with low
velocity fans. Display is equipped with a hot gas evaporator for
condensation and is regulated by a pressure control. Louvers
are located at front and back of base for air circulation. On/off
switch for entire system is located behind the louver access
panel.
Electrical: 115 volt, 60 Hertz, single phase. All units must be
hard wired in the field.
Specifications
Standard Features
Options &
Accessories
18-gauge interior top and bottom
ABS plastic beige interior with acrylic mirror
laminated to each side
Two epoxy coated beige wire shelves with
adjustable shelf supports
Interior is lit with three fluorescent lights (120V-
60C-1PH) with separated on/off switch
Each side of the curved glass is trimmed with
a polyethylene extrusion formed to match the
curvature of the glass
Cabinet base is constructed with an 18-gauge
stainless steel exterior and a galvanized 14-gauge
bottom
Exterior top is 18-gauge stainless steel and both
exterior sides are finished in stainless steel
High density environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming Potential)
polyurethane foam throughout unit
Adjustable feet to allow field leveling
Unit is supplied with self-closing easily removable
thermopane glass doors. The doors travel in a
thermoplastic extruded top and bottom track with
NSF food cleanouts in each bottom corner. Hold
open mechanism is supplied for easy loading and
•
•
•
•
•
•
•
•
•
•
537-CR 37.25” long display case
549-CR 49.25” long display case
561-CR 61.25” long display case
573-CR 73.25” long display case
•
•
•
•
Models
500-CR
Self-Contained Refrigerated Curved Glass Display Cases
500-CR: Self-Contained Refrigerated Curved Glass Display Cases
a lock for night storage
Main on/off switch
One year parts and 90 day labor standard
warranty
Curved thermopane 1” thick glass is
constructed of one .25” tempered outer
pane, one .63” thick air spacer and one
.18” tempered interior pane
Environmentally friendly HFC-404A
refrigerant
60 cycle - single phase electrical system
Low fan velocity to reduce food
dehydration
Unit is equipped with a hot gas
evaporator for condensation off the coil
and controlled by a pressure control
Front mounted louvers for proper
ventilation
Full height laminate ends and base
(customer side only)
One-way mirrored doors
Special decorative metal laminates
Glass shelves
•
•
•
•
•
•
•
•
•
•
•
•
561-CR
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
500-CR
Self-Contained Refrigerated Curved Glass Display Cases
Printed in the U.S.A.
DS500CR
05/10
Deleld reserves the right to make changes to the design or specications without prior notice.
Specifications
Model Type V/Hz/Ph Amps H.P.
Cabinet Load
BTU/HR
Sys. Cap
BTU/HR
Ship Weight
537-CR Refrigerated 115/60/1* 10.0 1/2 1730 2870 468lbs/213kg
549-CR Refrigerated 115/60/1* 10.0 1/2 2250 3335 697lbs/317kg
561-CR Refrigerated 115/60/1* 12.0 3/4 2770 4435 807lbs/367kg
573-CR Refrigerated 115/60/1* 12.0 3/4 3290 5185 922lbs/419kg
*All 500-CR models must be hardwired.
37.25
95cm
35.00
89cm
S/S Top
15.50
39cm
49.25
125cm
35.00
89cm
S/S Top
15.50
39cm
73.25"
186cm
35.00"
89cm
S/S Top
15.50
39cm
61.25"
156cm
35.00"
89cm
S/S Top
15.50
39cm
Sliding
Sliding
REF'G
REF'G
Access Panel
Light Switch
Main Power Switch
Located Behind Louver
46.37"
118cm
16.03"
41cm
8.00"
20cm
8.25"
21cm
1.50"
4cm
7.87"
20cm
25.75
65cm
20.75
53cm
26.25
67cm
Radius Of Curved
Glass (15.75" O.D.)
35.00"
89cm
Air
Out
Air
In
Acess Hole For
Elect. Connection
Plan View 537-CR
Plan View 561-CR
Plan View 549-CR
Plan View 573-CR
Typical Front Elevation
All 500-CR Models
Typical End Elevation
All 500-CR Models
Perspective View
Clear Door Opening Dimensions
Model 537 -CR
14.00” X 23.50” (36cm X 60cm)
Model 549-CR
19.75” X 23.50” (50cm X 60cm)
Model 561-CR
26.65” X 23.50” (68cm X 60cm)
Model 573-CR
31.75” X 23.50” (81cm X 60cm)
Interior Shelf Lengths
537-CR 33.00” (84cm)
549-CR 45.00” (114cm)
561-CR 57.00” (145cm)
573-CR 69.00” (175cm)
NOTE: Airflow Must Be Maintained
To Insure Unit Performance And
Maintain Warranty.
-
1
-
2
