CURT 11070 Installation guide

Type
Installation guide

CURT 11070 is a weight-carrying hitch designed for use with Volkswagen Jetta Sedans manufactured in 2005. It has a gross load capacity of 2000 lbs. and a tongue weight of 200 lbs. The hitch is made of steel and has a black powder coat finish for durability. It comes with all the necessary hardware for installation.

The CURT 11070 is a versatile hitch that can be used for a variety of purposes, including towing trailers, carrying bikes, or transporting cargo. It is important to note that the maximum towing capacity of the hitch is limited by the towing capacity of the vehicle itself. Please consult your vehicle's owner's manual to determine the maximum towing capacity.

CURT 11070 is a weight-carrying hitch designed for use with Volkswagen Jetta Sedans manufactured in 2005. It has a gross load capacity of 2000 lbs. and a tongue weight of 200 lbs. The hitch is made of steel and has a black powder coat finish for durability. It comes with all the necessary hardware for installation.

The CURT 11070 is a versatile hitch that can be used for a variety of purposes, including towing trailers, carrying bikes, or transporting cargo. It is important to note that the maximum towing capacity of the hitch is limited by the towing capacity of the vehicle itself. Please consult your vehicle's owner's manual to determine the maximum towing capacity.

Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
HHCS,3/8-16 UNC,1-1/4,GRD8,YZ10-10339
5
1
WASHER,FDR,3/8,CZ30-00205
5
2
NUT,SER-FLANGE,3/8-16 UNC,GRD8,YZ20-00102
5
3
NUT,HANDLE,1/2-13 UNC,GRD8,CZ20-001741
4
HHCS,1/2-13 UNC,1-1/4,GRD8,YZ
10-1047015
WASHER,S-CON,1/2,YZ
30-0014916
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY AUXILIARY STABILIZING STRAPS.
** FAILURE TO PROPERLY SUPPORT NON-TRAILER LOADS WILL VOID PRODUCT WARRANTY**
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-877-287-8634
HITCH WEIGHT: LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
2,000 200
17
20
99.5-05 VOLKSWAGEN JETTA SEDAN
6/18/2020
11070
40
TIRE WELL
DRILLING REQUIRED
1) Lift hitch into position aligning the slot in passenger side mounting plate with the existing hole in tow hook loop
bracket. Loosely install fasteners as shown.
2) Position hitch level and square to vehicle. Use hitch as a template to drill holes for mounting driver side plate.
Install fasteners as shown.
3) Use hitch as a template and drill hole for passenger side mounting plate. Install fasteners as shown.
4) Torque all 1/2" fasteners to 110 lb.-ft. and all 3/8" fasteners to 45 lb.-ft.
TOW HOOK
LOOP BRACKET
DRILL REQUIRED
MOUNTING HOLE
DRILL (4) MOUNTING
HOLES USING HITCH
AS A TEMPLATE
1
2
3
4
5
6
248366/ 247366
DESIGNED FOR USE WITH
BALLMOUNT #55001 / 45501
  • Page 1 1

CURT 11070 Installation guide

Type
Installation guide

CURT 11070 is a weight-carrying hitch designed for use with Volkswagen Jetta Sedans manufactured in 2005. It has a gross load capacity of 2000 lbs. and a tongue weight of 200 lbs. The hitch is made of steel and has a black powder coat finish for durability. It comes with all the necessary hardware for installation.

The CURT 11070 is a versatile hitch that can be used for a variety of purposes, including towing trailers, carrying bikes, or transporting cargo. It is important to note that the maximum towing capacity of the hitch is limited by the towing capacity of the vehicle itself. Please consult your vehicle's owner's manual to determine the maximum towing capacity.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI