Garmin Autopilot za manje vanbrodske motore - Reactor 40 Installation guide

Reactor™ 40 Kicker Yamaha™ F9.9 HP High

Thrust, F8 HP, and F8 HP High Thrust Adapter

Kit

Installation Examples

You can use these photographic examples to help when following the

instructions included with your Reactor 40 Kicker corepack and Yamaha

adapter kit.

Steering Actuator Installation Examples

Removing the Tiller Lock

NOTE: If your motor has a tiller lock ➊➊, it must be removed before installing

the steering actuator.

Complete Steering Actuator Installation

Throttle Actuator Installation Examples

Throttle Actuator Installed on Yamaha Throttle Shaft

Bell Crank Lever Installed on Throttle Linkage

NOTE: The old black plastic component piece must be removed from the

linkage and replaced with the new black plastic component piece from parts

bag 1..

April 2020 190-02451-22_0A Printed in Taiwan