Zanussi ZEM6740FBA User manual

ZEM6740FBA

User Manual

Hob

Contents

Safety information 2

Safety instructions 3

Product description 5

Daily use 7

Hints and tips 9

Care and cleaning 10

Troubleshooting 11

Installation 13

Technical information 15

Energy efficiency 16

Subject to change without notice.

Safety information

Before the installation and use of the appliance, carefully read the

supplied instructions. The manufacturer is not responsible if an

incorrect installation and use causes injuries and damages.

Always keep the instructions with the appliance for future

reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep children and pets away from the appliance when it

operates or when it cools down. Accessible parts are hot.

• If the appliance has a child safety device, we recommend you

activate it.

• Cleaning and user maintenance shall not be made by children

without supervision.

• Children of less than 3 years should be kept away unless

continuously supervised.

General Safety

• The appliance and its accessible parts become hot during use.

Do not touch the heating elements.

• Do not operate the appliance by means of an external timer or

separate remote-control system.

2 www.zanussi.com

• Unattended cooking on a hob with fat or oil can be dangerous

and may result in fire.

• Never try to extinguish a fire with water, but switch off the

appliance and then cover flame e.g. with a lid or a fire blanket.

• Do not store items on the cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids should

not be placed on the hob surface since they can get hot.

• Do not use a steam cleaner to clean the appliance.

• After use, switch off the hob element by its control and do not

rely on the pan detector.

• If the glass ceramic surface / glass surface is cracked, switch

off the appliance to avoid the possibility of electric shock.

• If the supply cord is damaged, it must be replaced by the

manufacturer, an authorized Service or similarly qualified

persons in order to avoid a hazard.

Safety instructions

Installation

WARNING!

Only a qualified person must install

this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Obey the installation instruction supplied

with the appliance.

• Keep the minimum distance from the other

appliances and units.

• Always be careful when you move the

appliance because it is heavy. Always wear

safety gloves.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance from

steam and moisture.

• Do not install the appliance adjacent to a

door or under a window. This prevents hot

cookware to fall from the appliance when the

door or the window is opened.

• If the appliance is installed above drawers

make sure that the space, between the

bottom of the appliance and the upper

drawer, is sufficient for air circulation.

• The bottom of the appliance can get hot.

Make sure to install a non-combustile

separation panel under the appliance to

prevent access to the bottom.

• Make sure that the ventilation space of 2

mm, between the worktop and the front of

the below unit, is free. The warranty does not

cover damages caused by the lack of an

adequate ventilation space.

Electrical Connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections should be made by

a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make sure

that the appliance is disconnected from the

power supply.

• Make sure that the electrical information on

the rating plate agrees with the power

supply. If not, contact an electrician.

• Make sure the appliance is installed

correctly. Loose and incorrect electricity

mains cable or plug (if applicable) can make

the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the cable.

www.zanussi.com 3

• Make sure the mains cable or plug (if

applicable) does not touch the hot appliance

or hot cookware, when you connect the

appliance to the near sockets

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug (if applicable) or to the mains

cable. Contact our Authorised Service

Centre or an electrician to change a

damaged mains cable.

• The shock protection of live and insulated

parts must be fastened in such a way that it

cannot be removed without tools.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure

that there is access to the mains plug after

the installation.

• If the mains socket is loose, do not connect

the mains plug.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips

and contactors.

• The electrical installation must have an

isolation device which lets you disconnect

the appliance from the mains at all poles.

The isolation device must have a contact

opening width of minimum 3 mm.

Use

WARNING!

Risk of injury, burns and electrical

shock.

• Remove all the packaging, labelling and

protective film (if applicable) before first use.

• Use this appliance in a household

environment.

• Do not change the specification of this

appliance.

• Make sure that the ventilation openings are

not blocked.

• Do not let the appliance stay unattended

during operation.

• Set the cooking zone to “off” after each use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on the

cooking zones. They can become hot.

• Do not operate the appliance with wet hands

or when it has contact with water.

• Do not use the appliance as a work surface

or as a storage surface.

• If the surface of the appliance is cracked,

disconnect immediately the appliance from

the power supply. This to prevent an

electrical shock.

• Users with a pacemaker must keep a

distance of minimum 30 cm from the

induction cooking zones when the appliance

is in operation.

• When you place food into hot oil, it may

splash.

WARNING!

Risk of fire and explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or heated

objects away from fats and oils when you

cook with them.

• The vapours that very hot oil releases can

cause spontaneous combustion.

• Used oil, that can contain food remnants,

can cause fire at a lower temperature than

oil used for the first time.

• Do not put flammable products or items that

are wet with flammable products in, near or

on the appliance.

WARNING!

Risk of damage to the appliance.

• Do not keep hot cookware on the control

panel.

• Do not let cookware to boil dry.

• Be careful not to let objects or cookware fall

on the appliance. The surface can be

damaged.

• Do not activate the cooking zones with

empty cookware or without cookware.

• Do not put aluminium foil on the appliance.

• Cookware made of cast iron, aluminium or

with a damaged bottom can cause

scratches on the glass / glass ceramic.

Always lift these objects up when you have

to move them on the cooking surface.

• This appliance is for cooking purposes only.

It must not be used for other purposes, for

example room heating.

Care and cleaning

• Clean regularly the appliance to prevent the

deterioration of the surface material.

• Deactivate the appliance and let it cool

down before you clean it.

• Disconnect the appliance from the electrical

supply before maintenance.

• Do not use water spray and steam to clean

the appliance.

4 www.zanussi.com

• Clean the appliance with a moist soft cloth.

Only use neutral detergents. Do not use

abrasive products, abrasive cleaning pads,

solvents or metal objects.

Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for

information on how to discard the appliance

correctly.

• Disconnect the appliance from the mains

supply.

• Cut off the mains cable and discard it.

Service

• To repair the appliance contact an

Authorised Service Centre.

• Use original spare parts only.

Product description

Cooking surface layout

210 mm

145 mm

180 mm

1 1

121

Induction cooking zone

Control panel

Control panel layout

910 811

42 3

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which

functions operate.

www.zanussi.com 5

Sen-

sor

field

Function Comment

ON / OFF To activate and deactivate the hob.

Lock / The Child Safety Device To lock / unlock the control panel.

STOP+GO To activate and deactivate the function.

Bridge To activate and deactivate the function.

- Heat setting display To show the heat setting.

- Timer indicators of cooking

zones

To show for which zone you set the time.

- Timer display To show the time in minutes.

- To select the cooking zone.

- To increase or decrease the time.

Power function To activate and deactivate the function.

- Control bar To set a heat setting.

Heat setting displays

Display Description

The cooking zone is deactivated.

The cooking zone operates.

STOP+GO function operates.

Automatic Heat Up function operates.

Power function operates.

+ digit

There is a malfunction.

A cooking zone is still hot (residual heat).

Lock / The Child Safety Device function operates.

Incorrect or too small cookware or no cookware on the cooking zone.

Automatic Switch Off function operates.

6 www.zanussi.com

Residual heat indicator

WARNING!

There is a risk of burns from

residual heat.

The induction cooking zones make the heat

necessary for cooking process directly in the

bottom of the cookware. The glass ceramic is

heated by the heat of the cookware.

Daily use

WARNING!

Refer to Safety chapters.

Activating and deactivating

Touch for 1 second to activate or deactivate

the hob.

Automatic Switch Off

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after you

activate the hob,

• you spill something or put something on the

control panel for more than 10 seconds (a

pan, a cloth, etc.). An acoustic signal sounds

and the hob deactivates. Remove the object

or clean the control panel.

• the hob gets too hot (e.g. when a saucepan

boils dry). Let the cooking zone cool down

before you use the hob again.

• you use incorrect cookware. The symbol

comes on and the cooking zone deactivates

automatically after 2 minutes.

• you do not deactivate a cooking zone or

change the heat setting. After some time

comes on and the hob deactivates.

The relation between the heat setting and

the time after which the hob deactivates:

Heat setting The hob deacti-

vates after

, 1 - 2

6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat setting

or move your finger along the control bar until

you reach the correct heat setting.

Bridge function

This function connects two left side cooking

zones and they operate as one.

First set the heat setting for one of the left side

cooking zones.

To activate the function: touch

. To set or

change the heat setting touch one of the control

sensors.

To deactivate the function: touch . The

cooking zones operate independently.

Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time. The

function sets the highest heat setting for some

time and then decreases to the correct heat

setting.

To activate the function the cooking

zone must be cold.

To activate the function for a cooking

zone: touch ( comes on). Immediately

touch the correct heat setting. After 3 seconds

comes on.

To deactivate the function: change the heat

setting.

www.zanussi.com 7

Power function

This function makes more power available to the

induction cooking zones. The function can be

activated for the induction cooking zone only for

a limited period of time. After this time the

induction cooking zone automatically sets back

to the highest heat setting.

Refer to “Technical information”

chapter.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: change the heat

setting.

Timer

Count Down Timer

You can use this function to set how long the

cooking zone should operate for a single

cooking session.

First set the cooking zone then set the

function. You can set the heat setting before

or after you set the function.

To set the cooking zone: touch again and

again until the indicator of a necessary cooking

zone comes on.

To activate the function or change the

time: touch

or of the timer to set the

time (00 - 99 minutes). When the indicator of

the cooking zone starts to flash slowly the time

counts down.

To see the remaining time: set the cooking

zone with . The indicator of the cooking zone

starts to flash quickly. The display shows the

remaining time.

To deactivate the function: set the cooking

zone with and touch . The remaining time

counts back to 00. The indicator of the cooking

zone goes out.

When the time comes to an end, the

sound operates and 00 flashes. The

cooking zone deactivates.

To stop the sound: touch .

Minute Minder

You can use this function as a Minute Minder

when the hob is activated and the cooking

zones do not operate (the heat setting display

shows ).

To activate the function: touch . Touch

or of the timer to set the time. When the

time comes to an end, the sound operates and

00 flashes.

To stop the sound: touch .

The function has no effect on the

operation of the cooking zones.

STOP+GO

This function sets all cooking zones that operate

to the lowest heat setting.

When the function operates, you cannot change

the heat setting.

The function does not stop the timer functions.

To activate the function: touch .

comes on.

To deactivate the function: touch . The

previous heat setting comes on.

Lock

You can lock the control panel while cooking

zones operate. It prevents an accidental change

of the heat setting.

Set the heat setting first.

To activate the function: touch .

comes on for 4 seconds. The Timer stays on.

To deactivate the function: touch

. The

previous heat setting comes on.

When you deactivate the hob, you

also deactivate this function.

The Child Safety Device

This function prevents an accidental operation

of the hob.

To activate the function: activate the hob

with . Do not set the heat setting. Touch

for 4 seconds. comes on. Deactivate the

hob with .

To deactivate the function: activate the hob

with . Do not set the heat setting. Touch

8 www.zanussi.com

for 4 seconds. comes on. Deactivate the

hob with .

To override the function for only one

cooking time: activate the hob with .

comes on. Touch for 4 seconds. Set the

heat setting in 10 seconds. You can operate

the hob. When you deactivate the hob with

the function operates again.

Power management function

• Cooking zones are grouped according to the

location and number of the phases in the

hob. See the illustration.

• Each phase has a maximum electricity

loading of 3700 W.

• The function divides the power between

cooking zones connected to the same

phase.

• The function activates when the total

electricity loading of the cooking zones

connected to a single phase exceeds 3700

• The function decreases the power to the

other cooking zones connected to the same

phase.

• The heat setting display of the reduced

zones changes between two levels.

Hints and tips

WARNING!

Refer to Safety chapters.

Cookware

For induction cooking zones a

strong electro-magnetic field creates

the heat in the cookware very

quickly.

Use the induction cooking zones

with correct cookware.

Cookware material

• correct: cast iron, steel, enamelled steel,

stainless steel, the bottom made of multi-

layer (with correct mark from a

manufacturer).

• not correct: aluminium, copper, brass,

glass, ceramic, porcelain.

Cookware is correct for an induction hob

if:

• some water boils very quickly on a zone set

to the highest heat setting.

• a magnet pulls on to the bottom of the

cookware.

The bottom of the cookware must be

as thick and flat as possible.

Cookware dimensions

Induction cooking zones adapt to the dimension

of the bottom of the cookware automatically to

some limit.

The cooking zone efficiency is related to the

diameter of the cookware. The cookware with a

smaller diameter than the minimum receives

only a part of the power generated by the

cooking zone.

Refer to “Technical information”

chapter.

The noises during operation

If you can hear:

• crack noise: cookware is made of different

materials (sandwich construction).

• whistle sound: you the cooking zone with

high power level and the cookware is made

of different materials (sandwich

construction).

• humming: you use high power level.

• clicking: electric switching occurs.

www.zanussi.com 9

• hissing, buzzing: the fan operates.

The noises are normal and do not refer to

hob malfunction.

Examples of cooking applications

The relation between the heat setting and the

cooking zone consumption of power is not

linear. When you increase the heat setting, it is

not proportional to the increase of the cooking

zone consumption of power. It means that the

cooking zone with the medium heat setting uses

less than a half of its power.

The data in the table is for guidance

only.

Heat setting Use to: Time

(min)

Hints

- 1

Keep cooked food warm. as neces-

sary

Put a lid on the cookware.

1 - 2 Hollandaise sauce, melt: butter,

chocolate, gelatine.

5 - 25 Mix from time to time.

1 - 2 Solidify: fluffy omelettes, baked

eggs.

10 - 40 Cook with a lid on.

2 - 3 Simmer rice and milkbased dishes,

heating up ready-cooked meals.

25 - 50 Add the minimum twice as much

liquid as rice, mix milk dishes part

procedure through.

3 - 4 Steam vegetables, fish, meat. 20 - 45 Add some tablespoons of liquid.

4 - 5 Steam potatoes. 20 - 60 Use max. ¼ l water for 750 g of

potatoes.

4 - 5 Cook larger quantities of food,

stews and soups.

60 - 150 Up to 3 l liquid plus ingredients.

6 - 7 Gentle fry: escalope, veal cordon

bleu, cutlets, rissoles, sausages, liv-

er, roux, eggs, pancakes, dough-

nuts.

as neces-

sary

Turn halfway through.

7 - 8 Heavy fry, hash browns, loin steaks,

steaks.

5 - 15 Turn halfway through.

9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

Boil large quantities of water. Power function is activated.

Care and cleaning

WARNING!

Refer to Safety chapters.

General information

• Clean the hob after each use.

• Always use cookware with clean bottom.

• Scratches or dark stains on the surface have

no effect on how the hob operates.

• Use a special cleaner applicable for the

surface of the hob.

• Use a special scraper for the glass.

Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, and food with sugar. If not, the

dirt can cause damage to the hob. Put the

10 www.zanussi.com

special scraper on the glass surface at an

acute angle and move the blade on the

surface.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat stains,

shiny metallic discoloration. Clean the hob

with a moist cloth and some detergent. After

cleaning, rub the hob dry with a soft cloth.

Troubleshooting

WARNING!

Refer to Safety chapters.

What to do if...

Problem Possible cause Remedy

You cannot activate or operate

the hob.

The hob is not connected to an

electrical supply or it is connec-

ted incorrectly.

Check if the hob is correctly con-

nected to the electrical supply.

Refer to the connection diagram.

The fuse is released. Make sure that the fuse is the

cause of the malfunction. If the

fuse releases again and again,

contact a qualified electrician.

Activate the hob again and set

the heat setting in less than 10

seconds.

You touched 2 or more sensor

fields at the same time.

Touch only one sensor field.

STOP+GO function operates. Refer to "Daily use" chapter.

There is water or fat stains on the

control panel.

Clean the control panel.

An acoustic signal sounds and

the hob deactivates.

An acoustic signal sounds when

the hob is deactivated.

You put something on one or

more sensor fields.

Remove the object from the sen-

sor fields.

The hob deactivates. You put something on the sensor

field .

Remove the object from the sen-

sor field.

Residual heat indicator does not

come on.

The zone is not hot because it

operated only for a short time.

If the zone operated sufficiently

long to be hot, speak to an Au-

thorised Service Centre.

Automatic Heat Up function does

not operate.

The zone is hot. Let the zone become sufficiently

cool.

The highest heat setting is set. The highest heat setting has the

same power as the function.

www.zanussi.com 11

Problem Possible cause Remedy

The heat setting changes be-

tween two levels.

Power management function op-

erates.

Refer to "Daily use" chapter.

The sensor fields become hot. The cookware is too large or you

put it too near to the controls.

Put large cookware on the rear

zones if possible.

comes on.

Automatic Switch Off operates. Deactivate the hob and activate it

again.

comes on.

The Child Safety Device or the

Lock function operates.

Refer to "Daily use" chapter.

comes on.

There is no cookware on the

zone.

Put cookware on the zone.

The cookware is incorrect. Use the correct cookware.

Refer to “Hints and tips” chapter.

The diameter of the bottom of the

cookware is too small for the

zone.

Use cookware with correct di-

mensions.

Refer to “Technical information”

chapter.

and a number come on.

There is an error in the hob. Disconnect the hob from the

electrical supply for some time.

Disconnect the fuse from the

electrical system of the house.

Connect it again. If comes on

again, speak to an Authorised

Service Centre.

comes on.

There is an error in the hob be-

cause a cookware boils dry. Au-

tomatic Switch Off and the over-

heating protection for the zones

operate.

Deactivate the hob. Remove the

hot cookware. After approximate-

ly 30 seconds, activate the zone

again. If the cookware was the

problem, the error message goes

out. Residual heat indicator can

stay on. Let the cookware be-

come sufficiently cool. Check if

your cookware is compatible with

the hob.

Refer to “Hints and tips” chapter.

If you cannot find a solution...

If you cannot find a solution to the problem

yourself, contact your dealer or an Authorised

Service Centre. Give the data from the rating

plate. Give also three digit letter code for the

glass ceramic (it is in the corner of the glass

surface) and an error message that comes on.

Make sure, you operated the hob correctly. If

not the servicing by a service technician or

dealer will not be free of charge, also during the

warranty period. The instructions about the

Service Centre and conditions of guarantee are

in the guarantee booklet.

12 www.zanussi.com

Installation

WARNING!

Refer to Safety chapters.

Before the installation

Before you install the hob, write down the

information bellow from the rating plate. The

rating plate is on the bottom of the hob.

Serial number ...........................

Built-in hobs

Only use the built-in hobs after you assemble

the hob into correct built-in units and work

surfaces that align to the standards.

Connection cable

• For a single phase or two phase connection

use the following (or higher) mains cable

type: H05BB-F Tmax 90°C.

• To replace the damaged mains cable use

the following (or higher) mains cable type:

H05BB-F Tmax 90°C. Speak to your local

Service Centre.

Assembly

min.

50mm

min.

500mm

min.

2mm

www.zanussi.com 13

min. 2 mm

12 mm

28 mm

38 mm

57 mm

41 mm

31 mm

min

30 mm

min. 500 mm

< 20 mm

> 20 mm

min. 2 mm

12 mm

28 mm

38 mm

57 mm

41 mm

31 mm

min. 500 mm

R 5mm

min.

55mm

560

490

min.

38 mm

min.

2 mm

14 www.zanussi.com

min.

12 mm

min.

2 mm

Protection box

If you use a protection box (an additional

accessory), the front airflow space of 2 mm and

the protective floor directly below the hob are

not necessary. The protection box accessory

may not be available in some countries. Please

contact your local supplier.

You can not use the protection box if

you install the hob above an oven.

Technical information

Rating plate

Modell ZEM6740FBA PNC 949 595 602 00

Typ 58 GAD DC AU 220 - 240 V 50 - 60 Hz

Induction 7.4 kW Made in Germany

Ser.Nr. ................. 7.4 kW

ZANUSSI

www.zanussi.com 15

Cooking zones specification

Cooking zone Nominal power

(maximum

heat setting)

[W]

Power function

[W]

Power function

maximum dura-

tion [min]

Cookware di-

ameter [mm]

Left front 2300 3200 10 180 - 210

Left rear 2300 3200 10 180 - 210

Right front 1400 2500 4 125 - 145

Right rear 1800 2800 10 145 - 180

The power of the cooking zones can be

different in some small range from the data in

the table. It changes with the material and

dimensions of the cookware.

For optimal cooking results use cookware not

larger than the diameter in the table.

Energy efficiency

Product information according to EU 66/2014

Model identification ZEM6740FBA

Type of hob Built-In Hob

Number of cooking zones 4

Heating technology Induction

Diameter of circular cooking

zones (Ø)

Left front

Left rear

Right front

Right rear

21.0 cm

14.5 cm

18.0 cm

Energy consumption per cook-

ing zone (EC electric cooking)

Left front

Left rear

Right front

Right rear

188.6 Wh / kg

177.4 Wh / kg

185.8 Wh / kg

178.3 Wh / kg

Energy consumption of the hob

(EC electric hob)

182.5 Wh / kg

EN 60350-2 - Household electric cooking

appliances - Part 2: Hobs - Methods for

measuring performance

Energy saving

You can save energy during everyday cooking if

you follow below hints.

• When you heat up water, use only the

amount you need.

• If it is possible, always put the lids on the

cookware.

• Before you activate the cooking zone put the

cookware on it.

• Put the smaller cookware on the smaller

cooking zones.

• Put the cookware directly in the centre of the

cooking zone.

• Use the residual heat to keep the food warm

or to melt it.

16 www.zanussi.com

ENVIRONMENT CONCERNS

Recycle the materials with the symbol . Put

the packaging in applicable containers to

recycle it. Help protect the environment and

human health and to recycle waste of electrical

and electronic appliances. Do not dispose

appliances marked with the symbol with the

household waste. Return the product to your

local recycling facility or contact your municipal

office.

www.zanussi.com 17

18 www.zanussi.com

www.zanussi.com 19

www.zanussi.com/shop

867320436-B-082015

Zanussi ZEM6740FBA User manual

Related papers

Other documents