Kenmore Pro 34423 Owner's manual

Brand: Kenmore Pro

Model: 34423

Category: Cookers

Type: Owner's manual

This manual is also suitable for

33693

Kenmore PRO

Gas Cooktop

Parrilla de Cocinar a gas

Table de cuisson à gaz

Use & Care Guide

Manual de Uso y Cuidado

Manuel d’utilisation et d’entretien

English / Español / Français

P/N A01704604A (1409)

Sears Brands Management Corporation

Hoﬀ man Estates, IL 60179 U.S.A.

www.kenmore.com

www.sears.com

Models/Modelos/Modèles: 790.33693 & 790.34423

Printed in China

Table of Contents

Cooktop Warranty ...................................................................... 2

IMPORTANT SAFETY INSTRUCTIONS ............................... 3-4

Product Record ............................................................................. 5

Serial Plate Location ................................................................... 5

Grounding Instructions ................................................................ 5

Liqueﬁ ed Petroleum (Propane) Gas Conversion .................... 5

Features at a Glance .................................................................. 6

Before Setting Surface Controls ................................................ 7

Surface Cooking .......................................................................... 7

Setting Surface Controls ..........................................................8-9

General Care & Cleaning .................................................... 10-11

Cleaning Various Parts of Your Cooktop ..........................10

Porcelain Enamel Cooktop Cleaning Instructions ...........10

Cleaning the Grates ..............................................................11

Cleaning the Burner Caps .....................................................11

Cleaning the Burner Heads ..................................................11

Before You Call ............................................................................12

Protection Agreements ..............................................................13

Sears Service ...............................................................................14

KENMORE PRO LIMITED WARRANTY

FOR ONE YEAR from the date of sale this appliance is warranted against defects in material or workmanship when it is

correctly installed, operated and maintained according to all supplied instructions.

WITH PROOF OF SALE, a defective appliance will receive free repair or replacement at option of seller.

For warranty coverage details to obtain free repair or replacement, visit the web page: www.kenmore.com/warranty

This warranty applies for only 90 DAYS from the sale date in the United States, and is void in Canada, if this appliance is

ever used for other than private household purposes.

This warranty covers ONLY defects in material and workmanship, and will NOT pay for:

1. Cracks in a ceramic glass cooktop that are not a result of thermal shock.

2. Stains and scratches on a ceramic glass cooktop resulting from accident or improper operation or maintenance.

3. Discoloration of cooktop surfaces resulting from normal use.

4. Expendable items that can wear out from normal use, including but not limited to ﬁ lters, belts, bags or screw-in base light

bulbs.

5. A service technician to clean or maintain this appliance, or to instruct the user in correct appliance installation, operation

and maintenance.

6. Service calls to correct appliance installation not performed by Sears authorized service agents, or to repair problems

with house fuses, circuit breakers, house wiring, and plumbing or gas supply systems resulting from such installation.

7. Damage to or failure of this appliance resulting from installation not performed by Sears authorized service agents,

including installation that was not in accord with electrical, gas or plumbing codes.

8. Damage to or failure of this appliance, including discoloration or surface rust, if it is not correctly operated and

maintained according to all supplied instructions.

9. Damage to or failure of this appliance, including discoloration or surface rust, resulting from accident, alteration, abuse,

misuse or use for other than its intended purpose.

10. Damage to or failure of this appliance, including discoloration or surface rust, caused by the use of detergents, cleaners,

chemicals or utensils other than those recommended in all instructions supplied with the product.

11. Damage to or failure of parts or systems resulting from unauthorized modiﬁ cations made to this appliance.

12. Service to an appliance if the model and serial plate is missing, altered, or cannot easily be determined to have the

appropriate certiﬁ cation logo.

Disclaimer of implied warranties; limitation of remedies

Customer’s sole and exclusive remedy under this limited warranty shall be product repair or replacement as provided herein.

Implied warranties, including warranties of merchantability or ﬁ tness for a particular purpose, are limited to one year or the

shortest period allowed by law. Seller shall not be liable for incidental or consequential damages. Some states and provinces

do not allow the exclusion or limitation of incidental or consequential damages, or limitation on the duration of implied

warranties of merchantability or ﬁ tness, so these exclusions or limitations may not apply to you.

This warranty applies only while this appliance is used in the United States and Canada.*

This warranty gives you speciﬁ c legal rights, and you may also have other rights which vary from state to state.

* In-home repair service is not available in all Canadian geographical areas, nor will this warranty cover user or servicer

travel and transportation expenses if this product is located in a remote area (as deﬁ ned by Sears Canada Inc.) where an

authorized servicer is not available.

Sears Brands Management Corporation, Hoﬀ man Estates, IL 60179

Sears Canada Inc., Toronto, Ontario, Canada M5B 2C3

• Remove all tape and packaging wrap before using

the cooktop. Destroy the carton and plastic bags after

unpacking the cooktop. Never allow children to play with

packaging material. Do not remove the model/serial

plate attached to the cooktop.

• Proper Installation—Be sure your appliance is properly

installed and grounded by a qualiﬁ ed technician in

accordance with the National Fuel Gas Code ANSI Z223.1

latest edition and CAN/CGA B149.2, and the National

Electrical Code ANSI/NFPA No. 70—latest edition, and

local code requirements. Install and/or adjust only per

installation instructions provided in the literature package

for this cooktop.

Sears Parts & Repair is the recommended repair service for

this appliance. Know how to disconnect the electrical power

to the appliance at the circuit breaker or fuse box in case

of an emergency.

• User Servicing—Do not repair or replace any part of

the appliance unless speciﬁ cally recommended in the

manuals. All other servicing should be done only by a

qualiﬁ ed technician to reduce the risk of personal injury

and damage to the cooktop.

• Never modify or alter the construction of a cooktop by

removing panels, wire covers, or any other part of the

product.

• Air curtain or other overhead hoods, which operate by

blowing a downward air ﬂ ow on to a range, shall not be

used in conjunction with gas ranges other than when the

hood and range have been designed, tested and listen by

an independent test laboratory for use in combination with

each other.

Stepping or leaning on this cooktop can result

in serious injuries and may also cause damage to the cooktop.

Do not allow children to climb or play around the cooktop.

• Storage on Appliance—Flammable materials should

not be stored on the cooktop, near surface burners.

This includes paper, plastic and cloth items, such as

cookbooks, plasticware and towels, as well as ﬂ ammable

liquids. Do not store explosives, such as aerosol cans,

on the cooktop. Flammable materials may explode and

result in ﬁ re or property damage.

Do not store items of interest to children in

the cabinets above the cooktop.

• Do not leave children alone—Children should not be left

alone or unattended in the area where an appliance is in

use. They should never be allowed to sit or stand on any

part of the appliance.

• DO NOT TOUCH SURFACE BURNERS, GRATES, OR

AREAS NEAR THESE BURNERS. Surface burners may be

hot even though the ﬂ ames are not visible. Areas near

surface burners may become hot enough to cause burns.

During and after use, do not touch or let clothing or other

ﬂ ammable materials touch these areas until they have

had suﬃ cient time to cool. Among these areas are the

cooktop and the surfaces facing the cooktop.

• Wear Proper Apparel—Loose-ﬁ tting or hanging garments

should never be worn while using the appliance. Do not let

clothing or other ﬂ ammable materials contact hot surfaces.

NEVER use this appliance as a space heater

to heat or warm the room. Doing so may result in carbon

monoxide poisoning.

• Do Not Use Water or Flour on Grease Fires—Smother the

ﬁ re with a pan lid, or use baking soda, a dry chemical or

foam-type extinguisher.

• When heating fat or grease, watch it closely. Fat or

grease may catch ﬁ re if allowed to become too hot.

• Use Only Dry Potholders—Moist or damp pot holders on

hot surfaces may result in burns from steam. Do not let

the potholders touch the ﬂ ame or burners. Do not use a

towel or other bulky cloth instead of a pot holder.

• Do Not Heat Unopened Food Containers—Buildup of

pressure may cause container to burst and result in injury.

• Know which knob controls each surface burner. Always

turn the knob to the LITE position when igniting the burners.

Visually check that the burner has lit. Then adjust the ﬂ ame

so it does not extend beyond the edge of the utensil.

Important Safety Instructions

Read all instructions before using this appliance.

Save these instructions for future reference.

This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all

instructions given.

This symbol will help alert you to situations that may cause serious bodily harm, death or property damage.

This symbol will help alert you to situations that may cause bodily injury or property damage.

If the information in this manual is not

followed exactly, a ﬁ re or explosion may result causing

property damage, personal injury or death.

FOR YOUR SAFETY:

— Do not store or use gasoline or other ﬂ ammable

vapors and liquids in the vicinity of this or any other

appliance.

— WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any

phone in your building.

• Immediately call your gas supplier from a neighbor’s

phone. Follow the gas supplier’s instructions.

• If you cannot reach your gas supplier, call the ﬁ re

department.

— Installation and service must be performed by a

qualiﬁ ed installer, servicer or the gas supplier.

Please carefully read and save these instructions

This Use & Care Manual contains general operating instructions for your appliance and feature information for several

models. Your product may not have all the described features. The graphics shown are representative. The graphics on

your appliance may not look exactly like those shown. Common sense and caution must be practiced when installing,

operating and maintaining any appliance.

Important Safety Instructions

Use Proper Flame Size—Adjust ﬂ ame size

so it does not extend beyond the edge of the utensil. The

use of undersized utensils will expose a portion of the

burner ﬂ ame to direct contact and may result in ignition

of clothing. Proper relationship of utensil to ﬂ ame will also

improve eﬃ ciency.

Do not use stove top grills on your sealed

gas burners. If you use a stove top grill on a sealed gas

burner, it will cause incomplete combustion and can result

in exposure to carbon monoxide levels above allowable

current standards. This can be hazardous to your health.

Use proper pan size—This appliance is

equipped with one or more surface burners of diﬀ erent

sizes. Select utensils having ﬂ at bottom large enough to

cover the surface burner. The use of undersized utensils will

expose a portion of the surface burner to direct contact

and may result in ignition of clothing. Proper relationship of

utensil to the surface burner will also improve eﬃ ciency.

• Clean the appliance regularly to keep all parts free

of grease that could catch ﬁ re. Exhaust fan ventilation

hoods and grease ﬁ lters should be kept clean. Do not

allow grease to accumulate on hood or ﬁ lter. Greasy

deposits in the fan could catch ﬁ re. When ﬂ aming food

under the hood, turn fan on. Refer to hood manufacturer's

instructions for cleaning.

• Utensil Handles Should Be Turned Inward from Edges

of Cooktop and Not Extend Over Adjacent Surface

Burners—To reduce the risk of burns, ignition of

ﬂ ammable materials, and spillage due to unintentional

contact with the utensil, the handle of the utensil should

be positioned so that it is turned inward, and does not

extend over adjacent surface burners.

• Never Leave Surface Burners Unattended at High Heat

Settings—Boilovers cause smoking and greasy spillovers

that may ignite, or a pan that has boiled dry may melt.

• Protective Liners—Do not use aluminum foil to line surface

burner pans. Protective liners or aluminum foil may

interfere with heat and air distribution, and combustion.

Damage to the cooktop or personal injury may result.

• Glazed Cooking Utensils—Only certain types of glass,

glass/ceramic, ceramic, earthenware, or other glazed

utensils are suitable for cooktop service without breaking

due to the sudden change in temperature. Check the

manufacturer's recommendations for cooktop use.

• Do Not Use Decorative Surface Burner Covers. If a

burner is accidentally turned on, the decorative cover will

become hot and possibly melt. You will not be able to see

that the burner is on. Burns will occur if the hot covers are

touched. Damage may also be done to the cooktop or

burners because the covers may cause overheating. Air

will be blocked from the burner and cause combustion

problems.

IMPORTANT SAFETY NOTICE

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances

known to the state to cause cancer, birth defects or other productive harm, and requires businesses to warn customers of

potential exposure to such substances.

Product Record

In this space below, record the date of purchase, model and

serial number of your product. You will ﬁ nd the model and

serial number printed on the serial plate. This serial plate is

located under the cooktop. See bottom of this page for the

serial plate location.

Model No. ______________________________________

Serial No. _______________________________________

Date of purchase ________________________________

Save these instructions and your sales receipt for future

reference.

Serial Plate Location

Please see the illustration for exact location. Remember to

record the serial number for future reference.

Serial plate is

located under the

burner box.

For personal safety, the cooktop must be properly grounded. For maximum

safety, the power cord must be plugged into an electrical outlet that is

correctly polarized and properly grounded.

DO NOT Operate the cooktop using a 2-prong adapter or an extension

cord. If a 2-prong wall receptacle is the only available outlet, it is the

personal responsibility of the consumer to have it replaced with a properly

grounded 3-prong wall receptacle installed by a qualiﬁ ed electrician.

See the INSTALLATION INSTRUCTIONS packaged with this cooktop for

complete installation and grounding instructions.

Grounding Instructions

Avoid ﬁ re hazard or electrical shock. DO

NOT use an adapter plug, an extension cord, or remove

grounding prong from electrical power cord. Failure to follow

this warning can cause serious injury, ﬁ re or death.

This appliance is equipped with a 3-prong

grounding plug for your protection against shock hazard

and should be plugged directly into a properly grounded

receptacle. DO NOT cut or remove the grounding prong from

this plug.

Do not, under any

circumstances,

cut, remove,

or bypass the

grounding prong.

Power supply

cord with 3-prong

grounding plug

Grounding

type wall

receptacle

Conversion to Liqueﬁ ed Petroleum Gas (or L.P. Gas)

This natural gas appliance is designed to allow for

conversion to Liqueﬁ ed Petroleum (L.P.) Gas.

Only a qualiﬁ ed service agent should perform the L. P.

conversion. Contact the local gas provider for conversion.

The L. P. Conversion Kit is supplied with this unit and is

located in the literature package. The kit contains installation

instructions which must be read before and followed

carefully when installing the kit.

To avoid serious injury, any additions,

changes or conversions required in order for this appliance to

satisfactorily meet the application needs must be made by a

qualiﬁ ed service agent.

Location of the Gas Surface Burners

Your cooktop is equipped with gas surface burners with diﬀ erent BTU ratings. The ability to heat food quicker and in larger

volumes increases as the burner size increases.

The small SIMMER burner is best used for simmering delicate sauces, etc.

The REGULAR burners can be used for most surface cooking needs.

The POWER burner is best used when preparing large quantities of food and it quickly bring liquids up to a rolling boil.

The TURBO BOIL FLEX burner is best used when bringing larger quantities of liquid to a rolling boil. You'll spend less

time preparing dinner and more time enjoying it with 18,200 BTUs of power.

Regardless of size, always select cookware that is suitable for the amount and type of food being prepared. Select a burner

and ﬂ ame size appropriate to the pan. Never allow ﬂ ames to extend beyond the outer edge of the pan.

Features at a Glance

Figure 1 - Model 790.33693

Figure 2 - Model 790.34423

Surface Cookware Recommendations

Always place the griddle on the grate before

turning on the burner.

Always use potholders to remove the griddle

from the grate. Allow the griddle to cool before removing. Do not

set hot griddle on surfaces that cannot withstand high heat such

as countertops.

Be sure the griddle is positioned correctly and is

stable before use to prevent hot spills and possible burns.

Using the Griddle

Before ﬁ rst use:

• Wash Griddle in hot soapy water.

Rinse and then dry completely.

• Apply a thin coat of vegetable oil to

the entire surface (front and back of

griddle).

• Preheat your oven to 350°F. Place the

griddle on the upper rack in your oven.

• Bake griddle for 1 hour at 350°F, then

turn oven OFF and let cool before

removing.

• The surface may appear to have a

tacky feel to it from this seasoning

process. If desired, wash the griddle in

hot soapy water, rinse well, and dry completely.

After each use:

• To prevent rusting, store in a dry place and keep uncovered.

• After each use, clean with a stiﬀ brush and hot water only.

• DO NOT CLEAN GRIDDLE IN DISHWASHER.

• Dry immediately and apply a light coating of vegetable oil

to griddle before storing.

Using the Griddle:

• Place either side of the griddle centered over the left side

gas burners.

• Preheat the griddle for 5 minutes on medium to medium

low setting.

Slow preheat ensures even heat distribution during the

cooking process.

• DO NOT preheat the griddle on HI setting. Preheating on

HI may warp the griddle and prevent even heat distribution.

Cookware Material types

The cookware material determines how evenly and quickly

heat is transferred from the surface unit to the pan bottom.

The most popular materials available are:

ALUMINUM - Excellent heat conductor. Some types of food

will cause it to darken (Anodized aluminum cookware resists

staining & pitting).

COPPER - Excellent heat conductor but discolors easily.

STAINLESS STEEL - Slow heat conductor with uneven

cooking results. Is durable, easy to clean and resists staining.

CAST IRON - A poor heat conductor however will retain

heat very well. Cooks evenly once cooking temperature is

reached.

PORCELAIN-ENAMEL on METAL - Heating characteristics

will vary depending on base material.

GLASS - Slow heat conductor.

Use Proper Cookware

Cookware should have ﬂ at bottoms that make good contact

with the cooktop grate. Check for ﬂ atness by rotating a

ruler across the bottom of the cookware (See Figure 1). Be

sure to follow the recommendations for using cookware as

shown in Figure 2.

Note: The size and type of cookware used will inﬂ uence the

setting needed for best cooking results.

Note: Always use a utensil for its intended purpose. Follow

manufacturer's instructions. Some utensils were not made to

be used in the oven or on the cooktop.

* Specialty pans such as lobster pots, griddles and pressure

cookers may be used but must conform to the above

recommended cookware requirements.

CORRECT

• Flat bottom and straight

sides.

• Tight ﬁ tting lids.

• Weight of handle does

not tilt pan. Pan is well

balanced.

• Pan sizes match the

amount of food to be

prepared.

• Made of material that

conducts heat well.

• Easy to clean.

INCORRECT

• Curved and warped pan bot-

toms.

• Pan overhangs unit by more

than 2.5 cm (1”).

• Heavy handle tilts pan.

• Flame extends beyond unit.

Figure 2

Figure 1

Setting Surface Burner Controls

Burner Cap

Burner Head

Fig. 1

. 4

Correct Burner Cap

Placement

Fig. 2

Incorrect Burner Cap

Placement

Fig. 3

Burner Cap Lip

Check Burner Cap Placement Before Operating

the Surface Burners

To prevent ﬂ are-ups and avoid creation of harmful by-

products, do not use the cooktop without all burner caps

properly installed to insure proper ignition and gas ﬂ ame size.

It is very important to be sure that all surface burner caps

and burner grates are properly installed and in the correct

locations BEFORE operating the cooktop burners.

Remember:

• Always keep surface burner caps in place whenever using

a surface burner.

• When placing the burner caps, be sure that all burner caps

are seated ﬁ rmly and rest level on top of burner heads.

• For proper ﬂ ow of gas and ignition of burners DO NOT

allow spills, food, cleaning agents or any other material

to enter the gas oriﬁ ce port opening.

Round Style Burners

The burner cap lip (See Fig. 1) should ﬁ t snug into the center

of burner head and rest level. Refer to Figs. 2 & 3 for

correct and incorrect burner cap placement. Once in place,

you may check the ﬁ t by gently sliding the burner cap

from side to side (Fig. 4) to be sure it is centered and ﬁ rmly

seated. When the burner cap lip makes contact inside the

center of the burner head you will be able to feel it. Please

note that the burner cap should NOT move oﬀ the center of

the burner head when sliding from side to side.

RIGHT

WRONG

Do not place items such as aluminum

foil, salt and pepper shakers, spoon holders or plastic

wrappings on top of the range when it is in use. These

items could melt or ignite. Potholders, towels or wood spoons

could catch ﬁ re if placed too close to a ﬂ ame.

Manual Lighting

In the event of an electrical power outage, the surface

burners can be lit manually. To light a surface burner, hold

a lit match to the burner head, then slowly turn the surface

control knob to LITE. After burner lights push in and turn

knob to desired setting. Use caution when lighting surface

burners manually.

Figure 5

Improper

ﬂ ame

size

Proper

ﬂ ame

size

*Flame Size Type of Cooking

High Flame Start most foods; bring water to a boil;

pan broiling.

Medium Flame Maintain a slow boil; thicken sauces,

gravies; steaming.

Low Flame Keep foods cooking; poach; stewing.

Setting Proper Surface Burner Flame Size

For most cooking, start on the highest control setting and

then turn to a lower one to complete the process. Use the

recommendations below as a guide for determining proper

ﬂ ame size for various types of cooking. The size and type

of utensil used and the amount of food being cooked will

inﬂ uence the setting needed for cooking.

*These settings are based on using medium-weight metal

or aluminum pans with lids. Settings may vary when using

other types of pans. The color of the ﬂ ame is the key to

proper burner adjustment. A good ﬂ ame is clear, blue and

hardly visible in a well-lighted room. Each cone of ﬂ ame

should be steady and sharp. Clean burner if ﬂ ame is yellow-

orange.

Regardless of size, always select cookware that is suitable

for the amount and type of food being prepared. Select a

burner and ﬂ ame size appropriate to the pan. Never allow

ﬂ ames to extend beyond the outer edge of the pan.

Never extend the ﬂ ame beyond the outer edge of the

utensil. A higher ﬂ ame wastes heat and energy and

increases your risk of being burned by the ﬂ ame (Figure 5).

For deep fat frying, use a thermometer and adjust the

surface control knob accordingly. If the fat is too cool, the

food will absorb the fat and be greasy. If the fat is too

hot, the food will brown so quickly that the center will be

undercooked. Do not attempt to deep fat fry too much food

at once as the food will neither brown nor cook properly.

Setting Surface Burner Controls

Setting the Burners

1. Place cooking utensil on

surface burner.

2. Push the surface control

knob down and turn

counterclockwise out of

the OFF position (See

Figures 1&2).

3. Release the knob and

rotate to the LITE

position.

4. Visually check that the

burner has a ﬂ ame.

5. Once the burner is

lit, continue to turn

counterclockwise to the

desired ﬂ ame size. The control knobs do not have to be

set at a particular setting. Use the knob indicator settings

to adjust the ﬂ ame as needed.

Important notes:

• DO NOT cook with the surface control knob left in the

LITE position. (The electronic ignitor will continue to spark

if the control knob setting remains in the LITE position).

• When setting any surface control knob to the LITE

position, all electronic surface ignitors will spark at the

same time. However, only the surface burner you are

setting will ignite.

• NEVER place or straddle a cooking utensil over two

diﬀ erent surface cooking areas at the same time. This

can cause uneven heating results.

Figure 2 - Typical Control Knob

Figure 1

DO NOT use a wok if it is equipped

with a metal ring that extends beyond

the burner unit. Because this ring traps

heat, the surface unit and cooktop

surface could be damaged.

Using a Wok (not supplied)

Woks with ﬂ at bottoms suitable for use on your cooktop

are available in most cookshop or hardware stores. Round-

bottomed woks (with a support ring that does not extend

beyond the burner unit) may also be used. The metal ring

was designed to support the wok safely when it is ﬁ lled with

large amounts of liquids (soup making) or fat (frying).

Wire trivets: Do not use wire trivets. Cookware bottoms must

be in direct contact with the grates.

General Care & Cleaning

Cleaning Various Parts of Your Cooktop

Before cleaning any part of the cooktop, be sure all controls are turned OFF and the cooktop is COOL. REMOVE

SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANINGS NOW WILL REDUCE THE DIFFICULTY

AND EXTENT OF A MAJOR CLEANING LATER.

Surfaces How to Clean

Painted Control Knobs For general cleaning, use hot soapy water and a cloth. For more diﬃ cult soils and built-up

grease, apply a liquid detergent directly onto the soil. Leave on soil for 30 to 60 minutes.

Rinse with a damp cloth and dry. DO NOT use abrasive cleaners on any of these materials;

they can scratch or dull the ﬁ nish.

Control Panel Wipe the control panel clean after each use. Before cleaning the control panel, turn all

controls to OFF and remove the control knobs. To remove, pull each knob straight oﬀ the

shaft. Clean using hot, soapy water and a cloth. Be sure to squeeze excess water from the

cloth before wiping the panel; especially when wiping around the controls. Excess water in or

around the controls may cause damage to the appliance. To replace knobs after cleaning, line

up the ﬂ at sides of both the knob and the shaft; then push the knob into place.

Stainless Steel Clean with hot, soapy water and a dishcloth. Rinse with clean water and cloth. Do not use

cleaners with high concentrations of chlorides or chlorines. Do not use harsh scrubbing

cleaners. Only use kitchen cleaners that are especially made for cleaning stainless steel.

Always be sure to rinse the cleaners oﬀ from the surface as bluish stains may occur during

heating that cannot be removed.

Porcelain Enamel

Burner Grates, Cooktop

Surface

Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1 solution of

clear water and ammonia. If necessary, cover diﬃ cult spots with an ammonia-soaked paper

towel for 30 to 40 minutes. Rinse with clean water and a damp cloth, and then scrub with a

soap-ﬁ lled scouring pad. Rinse and wipe dry with a clean cloth or paper towel. Remove all

cleaners or the porcelain may become damaged during future heating. DO NOT use spray

oven cleaners on the cooktop.

General Care & Cleaning

Cleaning the Cooktop and Surface Burners

CAUTION

To avoid possible burns DO NOT attempt

any of the cooktop cleaning instructions provided before

turning OFF all of the surface burners and allow them to

completely cool.

CAUTION

Any additions, changes or conversions

required in order for this appliance to satisfactorily meet the

application needs must be made by an authorized qualiﬁ ed

agency.

Routinely clean the cooktop. Wipe with a clean, damp cloth

and wipe dry to avoid scratches.

Keeping the surface burner head ports and slots clean will

prevent improper ignition and an uneven ﬂ ame. See the

following sections for more instructions.

Cleaning recessed and contoured areas of cooktop

If a spill occurs on or in the recessed or contoured areas,

blot up spill with an absorbent cloth. Rinse with a clean,

damp cloth and wipe dry.

Cleaning surface burner grates

• Clean only after the grates are completely cool.

• Use nonabrasive plastic scrubbing pad and mild abrasive

cleanser or clean in the dishwasher.

• Food soils containing acids may aﬀ ect the ﬁ nish. Clean

immediately after the grates are cool.

• Thoroughly dry grates immediately following cleaning.

Cleaning burner caps

• Remove caps from burner heads after they have cooled.

• Clean heavy soils with a plastic scrubbing pad and

absorbent cloth.

• Thoroughly dry burner caps immediately following

cleaning including the bottom and inside of cap.

• Do not use abrasive cleaners. They can scratch porcelain.

• Do not clean burner caps in the dishwasher.

• Do not operate surface burners without burner caps

properly in place. Read important notes.

Cleaning surface burner heads

For proper gas ﬂ ow it may be necessary to clean the

burner head and slots. To clean, ﬁ rst use a clean DAMP

cloth to soak up any spills. Remove any food from between

the burner slots using a small nonabrasive brush like a

toothbrush and afterwards wipe up using a damp cloth. For

stubborn soils located in the slots, use a small-gauge wire or

needle to clean.

Any spill on or around the electrode must be carefully

cleaned. Take care not to hit the electrode with any thing

hard or it could be damaged.

To clean the burner head ignition ports

Each burner head has a small ignition port located as

shown. Should you experience ignition problems it may be

that this port hole is partially blocked with soil. With the

burner head in place, use a small wire gauge needle or the

end of a paper clip to clear the ignition port (See to Fig. 1

and 2).

Important notes:

• The surface burner heads are secured to the cooktop and

must be cleaned in place on the cooktop.

• Always keep the surface burner caps in place whenever

a surface burner is in use.

• When replacing the burner caps, be sure the burner caps

are seated ﬁ rmly on top of the burner heads.

• For proper ﬂ ow of gas and ignition of burners DO NOT

allow spills, food, cleaning agents or any other material

to enter the gas oriﬁ ce port opening.

Figure 1- Cooktop regular burner head

Slots

Ignition port

Oriﬁ ce port

Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that

are not the result of defective workmanship or materials in this appliance.

Before You Call

Solutions to Common Problems

OCCURRENCE POSSIBLE CAUSE/SOLUTION

Surface burners do not light Surface Control knob has not been completely turned to LITE. Push in and turn

the Surface Control knob to LITE until burner ignites and then turn control to

desired ﬂ ame size.

Be sure gas supply valve is open.

Gas-air mixture needs a straight line to travel. Be sure burner is properly seated

in its support (models with open burners only).

Burner ports or slots are clogged. With the burner oﬀ , use a small-gauge wire

or needle to clean ports or slots.

Power cord is disconnected from outlet (electric ignition models). Be sure cord

is plugged securely into outlet.

Electrical power outage (electric ignition models). Burners can be lit manually.

See Setting Surface Controls in this Use & Care Guide.

Surface burner ﬂ ame burns half way

around.

Burner ports or slots are clogged. With the burner oﬀ , clean ports with a small-

gauge wire or needle to clean ports or slots.

Moisture is present after cleaning. Lightly fan the ﬂ ame and allow burner to

operate until ﬂ ame is full. To avoid this occurrence dry the burners thoroughly

following instructions under General Care & Cleaning.

Surface burner ﬂ ame is orange. Dust particles in main line. Allow the burner to operate a few minutes until ﬂ ame

turns blue.

In coastal areas, a slightly orange ﬂ ame is unavoidable due to salt air.

Congratulations on making a smart purchase. Your new Kenmore

product is designed and manufactured for years of

dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That’s when

having a Master Protection Agreement can save you money and aggravation.

The Master Protection Agreement also helps extend the life of your new product. Here’s what the Agreement* includes:

;Parts and labor needed to help keep products operating properly under normal use, not just defects. Our coverage

goes well beyond the product warranty. No deductibles, no functional failure excluded from coverage – real

protection.

;Expert service by a force of more than 10,000 authorized Sears service technicians, which means someone you

can trust will be working on your product.

;Unlimited service calls and nationwide service, as often as you want us, whenever you want us.

;«No-lemon» guarantee – replacement of your covered product if four or more product failures occur within twelve

months.

;Product replacement if your covered product can’t be ﬁ xed.

;Annual Preventive Maintenance Check at your request – no extra charge.

;Fast help by phone – we call it Rapid Resolution – phone support from a Sears representative on all products.

Think of us as a «talking owner’s manual».

;Power surge protection against electrical damage due to power ﬂ uctuations.

;$250 Food Loss Protection annually for any food spoilage that is the result of mechanical failure of any covered

refrigerator or freezer.

;Rental reimbursement if repair of your covered product takes longer than promised.

;25% discount off the regular price of any non-covered repair service and related installed parts.

Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime

day or night, or schedule a service appointment online.

The Master Protection Agreement is a risk free purchase. If you cancel for any reason during the product warranty period,

we will provide a full refund. Or, a prorated refund anytime after the product warranty period expires. Purchase your Master

Protection Agreement today!

Some limitations and exclusions apply. For prices and additional information in the U.S.A. call 1-800-827-6655.

* Coverage in Canada varies on some items. For full details call Sears Canada at 1-800-361-6665.

Sears Installation Service

For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items,

in the U.S.A. or Canada call 1-800-4-MY-HOME

MASTER PROTECTION AGREEMENTS

® Registered Trademark /

Trademark of KCD IP, LLC in the United States, or Sears Brands, LLC in other countries

® Marca Registrada /

Marca de Fábrica de KCD IP, LLC en Estados Unidos, o Sears Brands, LLC in otros países

Marque de commerce /

Marque déposée de Sears Brands, LLC

Get it fixed, at your home or ours!

Your Home

For troubleshooting, product manuals and expert advice:

www.managemylife.com

For repair – in your home – of all major brand appliances,

lawn and garden equipment, or heating and cooling systems,

no matter who made it, no matter who sold it!

For the replacement parts, accessories and

owner’s manuals that you need to do-it-yourself.

For Sears professional installation of home appliances

and items like garage door openers and water heaters.

1-800-4-MY-HOME

(1-800-469-4663)

Call anytime, day or night(U.S.A. and Canada)

www.sears.com www.sears.ca

Our Home

For repair of carry-in items like vacuums, lawn equipment,

and electronics, call anytime for the location of your nearest

Sears Parts & Repair Service Center

1-800-488-1222 (U.S.A.) 1-800-469-4663 (Canada)

www.sears.com www.sears.ca

To purchase a protection agreement on a product serviced by Sears:

1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)

Para pedir servicio de reparación

a domicilio, y para ordenar piezas:

1-888-SU-HOGAR

(1-888-784-6427)

www.sears.com

Au Canada pour service en français:

1-800-LE-FOYER

(1-800-533-6937)

www.sears.ca

Kenmore Pro 34423 Owner's manual

Brand: Kenmore Pro

Model: 34423

Category: Cookers

Type: Owner's manual

This manual is also suitable for

33693

Download PDF

report

Kenmore Pro 34423 Owner's manual

This manual is also suitable for

Kenmore Pro 34423 Owner's manual

Related papers

Other documents