Piega CL 120 X User manual

Piega
Brand
Piega
Model
CL 120 X
Category
Soundbar speakers
Type
User manual

Piega CL 120 X

The Piega CL 120 X is a high-quality floor-standing loudspeaker with a coaxial ribbon system. It is designed to provide an immersive and realistic listening experience, with clear and precise sound reproduction across the entire frequency range.

The CL 120 X features a 3-way system design, with two 22 cm MOM bass drivers, a C1 coaxial ribbon system, and a bi-wiring / WBT connection. This combination of drivers and technologies delivers exceptional sound quality, with deep and powerful bass, detailed and articulate midrange, and clear and extended treble.

The CL 120 X is also designed to be easy to use and integrate into your home audio system. It has a recommended amplifier output of 20 - 250 Watt, and a sensitivity of 92 db/W/m, making it compatible with a wide range of amplifiers and receivers.

Piega CL 120 X

The Piega CL 120 X is a high-quality floor-standing loudspeaker with a coaxial ribbon system. It is designed to provide an immersive and realistic listening experience, with clear and precise sound reproduction across the entire frequency range.

The CL 120 X features a 3-way system design, with two 22 cm MOM bass drivers, a C1 coaxial ribbon system, and a bi-wiring / WBT connection. This combination of drivers and technologies delivers exceptional sound quality, with deep and powerful bass, detailed and articulate midrange, and clear and extended treble.

The CL 120 X is also designed to be easy to use and integrate into your home audio system. It has a recommended amplifier output of 20 - 250 Watt, and a sensitivity of 92 db/W/m, making it compatible with a wide range of amplifiers and receivers.

PIEGA CL Series
Reference floor-standing loudspeaker with coaxial ribbon system
CL 120 X
The new CL 120 X is now available to succeed the legendary and widely acclaimed
C 40. Not a simple task many might think, and rightly so. There has probably never
been so much effort invested in the fine tuning of this new speaker. Thanks to
advancements in several areas, the “newcomer” doesn‘t need to be afraid of
comparison – on the contrary.
Like its predecessor, the CL 120 X comes with a C1 large coaxial ribbon system, an
elegant design and breathtaking sound quality. Improvements were made in
efficiency for even simpler operation of the amplifiers, in the high speed bass and in
the resonance free cabinet. We are convinced that the CL 120 X will become one of
the greats. The performance in terms of quality and quantity is considerable, and
friends of “live” sound will get their money‘s worth with this new model. The high
class loudspeaker comes in the further reinforced and therefore resonance-free
aluminum cabinet, which provides the required space for the music, both with quiet
sounds and with high orchestral volume. Naturally, the CL 120 X is 100% hand
crafted by us in our Horgen workshops, where it is also fine tuned, so that each
piece is a unique item fitted with components of the optimum quality. All employ-
ees at PIEGA are aware of their responsibility to maintain the exclusivity of this
loudspeaker and focus all their abilities in ensuring that the CL 120 X reaches the
new owner in perfect condition. In order to also meet external aesthetic require-
ments, the new loudspeaker is crafted in silver or black anodized aluminum, or an
elegant piano finish.
The CL 120 X guarantees the pinnacle of musical enjoyment, and even long
forgotten treasures of a private music collection are brought to life.
Reference floor-standing loudspeaker with coaxial ribbon system
CL 90 X
Fascinating sound quality free of interference, from the lowest ultra-precise bass to
the cleanest midrange and tweeter, thus bringing visual and acoustic elegance and
harmony.
Perfect sound quality is produced from the combination of a high-speed MOM
(Magnetic Optimized Motor) bass chassis and coaxial midrange tweeter system,
since C2 coaxial ribbon system offers, in the X, Y axes and the Z axis, the same
point as the acoustic center so that all frequencies are transferred at the same time.
The aluminum cabinet with its sophisticated damping is free of intrinsic sound. The
sound produced is only radiated from the membranes and offers an astounding level
of clarity and purity, thus producing a musical experience that delights the listener
with all its subtleties.
All you need to do is to put on your favorite music, close your eyes and savor the
wonderful sound range of the CL 90 X.
PIEGA CL Series
Technical Data
The loudspeakers of all series are
available on request in a range of
different finishes and with different
loudspeaker coverings.
CL 90 XCL 120 X
1125
280
380
Model CL 120 X CL 90 X
Design principle 3-way system floor-standing 3-way system floor-standing
loudspeaker loudspeaker
Recommended 20 – 250 Watt 20 – 250 Watt
amplifier output
Sensitivity 92 db/W/m 92 db/W/m
Impedance 4 Ohm 4 Ohm
Frequency range 22 Hz – 50 kHz 24 Hz – 50 kHz
Equipment 2 22 cm MOM
®
bass 2 22 cm MOM
®
bass
1 C1 coaxial ribbon system 1 C2 coaxial ribbon system
Connection Bi-Wiring / WBT Bi-Wiring / WBT
Dimensions (HxWxD) 113 x 28 x 38 cm 113 x 28 x 38 cm
Weight 77 kg 75 kg
Finish Black piano finish cabinet, Aluminum cabinet,
Baffle and top aluminum Front grill in silver
silver, front grill in silver optional:
optional: Aluminum cabinets
Cabinets silver or black anodized black anodized
Service
PIEGA offers first-class service and six
years warranty on all loudspeakers,
as well as three years on the electronics.
PIEGA SA
Bahnhofstrasse 29
CH-8810 Horgen
Telephone +41 44 725 90 42
Fax +41 44 725 91 92
[email protected]h
www.piega.ch
Information for Exports
PIEGA SA
Bahnhofstrasse 29
CH-8810 Horgen
Telephone +41 44 725 90 02
Fax +41 44 725 91 92
[email protected]h
www.piega.ch
Published Summer 2008
Subject to modifications, in particular
technical modifications and errors
PIEGA 2008
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Piega CL 120 X User manual

Piega
Brand
Piega
Model
CL 120 X
Category
Soundbar speakers
Type
User manual

Piega CL 120 X

The Piega CL 120 X is a high-quality floor-standing loudspeaker with a coaxial ribbon system. It is designed to provide an immersive and realistic listening experience, with clear and precise sound reproduction across the entire frequency range.

The CL 120 X features a 3-way system design, with two 22 cm MOM bass drivers, a C1 coaxial ribbon system, and a bi-wiring / WBT connection. This combination of drivers and technologies delivers exceptional sound quality, with deep and powerful bass, detailed and articulate midrange, and clear and extended treble.

The CL 120 X is also designed to be easy to use and integrate into your home audio system. It has a recommended amplifier output of 20 - 250 Watt, and a sensitivity of 92 db/W/m, making it compatible with a wide range of amplifiers and receivers.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents