Mede8er MED400X MINI User manual

Brand: Mede8er

Model: MED400X MINI

Category: Digital media players

Type: User manual

Mede8er MED400X MINI is a high-quality multimedia player that supports the playback of various media formats from different sources. The device can be connected to a TV or amplifier via HDMI or composite video and analog audio outputs. It also features a built-in digital audio output for connecting to a home theater system. The MED400X MINI can be connected to a local network via a wired Ethernet connection or wirelessly using the Mede8er Wireless Dongle 802.11n (sold separately).

High Definition Multimedia Player

MED400X MINI

User Manual

Page1

INDEX

page 1

page 2

page 3

page 4

page 5

page 6

page 7

page 8

page 9

page10

page11

page12

page13

page14

page15

page16

page17

page18

page19

page20

page21

page22

page23

page24

page25

page26

page27

page28

page29

Index

Introduction

General Overview

Connections

Power Up and Standby

TV Output Settings / Audio Settings

Remote Functionality

Wired Network Connection and Setup

Wireless Network Setup / Firmware Update

Media Library

Media Library Music Player

Cover Art Preview

Play Folder / Play from Cover Art / Watched Indicator

Folder / System Lock

File / Folder Jump to

Playlists

Time Bar Jump

Time Bar FF/RW - Goto Screen

Screen Calibration

Subtitles

Video Wall

Video Wall Continued

File Manager

File Manager -Detail

File Manager - Detail Continued

Internet Radio

NFS (Network File System)

Icon Table

Thank you for purchasing the Mede8er Multimedia Player.

Warranty

Mede8er products carry a 24 month from date of purchase warranty. In the event of warranty service please

provide proof of purchase. Return your product to the store that it was purchased from or return it directly to

Sanji Electronics (Pty) Ltd 106, 16th Rd Midrand, Gauteng, South Africa.

Warranty does not cover damage by

a) Lightning or over voltage

b) Water damage or liquid spill

c) Misuse or abuse

d) User tampering

e) Using non Mede8er approved Firmware

Sanji Electronics is not responsible for any loss of data irrespective of the cause.

Important Safety Instructions

· Read these instructions for all components before using this product.

· Do not use this apparatus near water or moisture. Do not use this product near a bathtub, washbowl,

kitchen sink, laundry tub, in a wet basement, near a swimming pool, or anywhere else that water or

moisture are present.

· Clean only with a soft dry cloth and as directed by the manufacturer. Unplug this product from the wall

outlet before cleaning.

· Do not block any ventilation openings. Install in accordance with the manufacturer instructions. To

ensure reliable operation of the product and to protect it from overheating, put the product in a position

and location that will not interfere with its proper ventilation. For example, do not place the product on

a bed, sofa, or similar surface that may block the ventilation openings. Do not put it in a built-in system,

such as a bookcase or a cabinet that may keep air from flowing through its ventilation openings.

· Do not install near any heat sources, such as radiators, heat registers, stoves or other apparatus that

produce heat.

· Protect the power cord from being walked on or pinched, particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

· Only use attachments or accessories specified by the manufacturer.

· Unplug this apparatus during lightning storms or when unused for long periods of time to prevent

damage to this product.

Refer all servicing to qualified service personnel

The MED400X MINI is the latest generation multimedia player specially developed by Sanji for today’s

demanding media enthusiast. The Mede8er has been designed for good solid media playback from a USB

device, SD Card, Internet or Local Network source. The User Interface is neat and intuitive without being

complicated. Sanji has more than achieved their design goals by offering a media player that supports most

of the popular media formats at a very affordable price.

Please check the Mede8er forum for the latest user guide. www.mede8erforum.com

Page2

GENERAL OVERVIEW

Composite Video Out

HDMI Connector

RJ45 - Lan connector

Optical Audio Out

Page3

TV Out

On/Off

Status Led

DC - 5Volt 2.4 Amp input

Analogue Audio Out

USB Host Port

SD Card Slot

CONNECTIONS

Analogue Audio and Composite Video connection to TV.

Composite Video offers the most basic picture quality connection and should only be used if your TV does not

have a HDMI input. Use RCA analogue audio outputs in the absence of HDMI or Digital Audio inputs on your

TV or Home Theatre system. RCA analogue outputs will output a downmix from mutli-channel to stereo.

AUDIO IN

L R

VIDEO IN

HDMI

Connect LAN cable to router or switch

Optical Digital

HDMI - RJ45 Network - Toslink Connection to a TV or Amplifier

For digital audio connection to your Home Theatre System use the HDMI connector. If your amplifier does not

have HDMI connector than you can use the TOSLINK Optical Digital output. The MED400X supports both

Passthrough and Downmix for both Dolby Digital and DTS signals.

Page4

Power up and Standby

Plug the AC/DC adapter into the mains outlet and plug the DC Jack into the DC IN at the rear of the

MED400X. DO NOT USE ANY AC/DC ADAPTER AND ONLY USE THE ONE SUPPLIED otherwise you

may cause damage to the unit. Press the On/ Off button on the Mede8ers front panel and front facia LED will

turn on Blue. You can put your Mede8er into standby by pressing the On/Off button on the remote. When in

standby the front facia LED will turn Red.

Page5

Page6

TV OUTPUT SETTINGS

Connect the Mede8er to your TV by one of the connection options as shown on page 4 and change the

input option on your TV to match the option you selected. If you do not get to see the Mede8er GUI on your

TV you will need to toggle the Mede8er TV output until you get a picture.

TV SYS Toggle Procedure

The MED400X has two video output options ie Composite Video (yellow)

RCA connectors and HDMI. Each output option also offers different

screen resolution settings and these will need to be adjusted to

match the type of TV used.

To change the Video Output on the

Mede8er just press the TV SYS button

or the TV SYSTEM button on the

remote and it will change the Video

Output to the next available output

option. If after pressing the TV SYS

button you still do not get a picture

then after a short pause press the

TV SYS again until you see the

Mede8er GUI on your TV. Keep

repeating this procedure until you

see a picture on your TV.

AUDIO SETTINGS

HDMI Downmix (2 channel)

Use this setting if you are connecting the Mede8er directly to the HDMI input on your TV. The

sound will be downmixed to 2 channel stereo.

HDMI Passthrough

Use this setting if you are connecting to the HDMI input of a Home Theatre Amplifier. The audio will be

passed through as Bitstream or LPCM and the amplifier will do the multichannel decoding.

SPDIF Downmix (2 channel)

Use this setting to connect to a Amplifier via Toslink optical cable or Co-Axial Digital RCA cable.

The sound will be downmixed to 2 channel stereo.

SPDIF Passthrough

Use this setting to connect to amplifier via Toslink optical cable. The sound will be passed

through as Bitstream or LPCM and the amplifier will do the multichannel decoding.

Once you see the Mede8er GUI on your TV then you must enter the Video Setup

mode and adjust the Video settings to match the screen size resolution of your

TV.

Page7

Audio Selection

Subtitle

Setup Menu

Return

Goto

Numbers

Info Screen

Audio Mute

On / Off

TV System

Rewind

Fast Forward

Home Page

DVD Menu / Menu

Slow / Zoom

Pause

Skip Forward/Back

Select

Confirm

Volume Down

Volume Up

Fast Forward

Fast Rewind

Pause / Play

Navigation Buttons Additional Functionality

To assist ease of use operation - The Mede8er remote has been designed to be ergonomic and simple to

use. While watching your Videos you can intuitively navigate and change certain function without the need to

continually look at the remote control.

During Video Playback (excluding DVD files) you can use the navigation buttons for operational functions like

Fast Forward, Rewind, Pause, Stop, Volume Up and Volume Down.

*Navigation Left

REMOTE FUNCTIONALITY

Repeat Shuffle

Play Stop

Next/Previous

Volume Up/Down

Navigation Right - FF in Video File (not DVD)

Navigation Up - Volume Up in Video File (not DVD)

Navigation Down - Volume Down in Video File (not DVD)

Navigation Enter - Pause / Play in Video File (not DVD)

Music Playlist

* Rewind in Video File (not DVD)

WIRED NETWORK CONNECTION AND SETUP

The Mede8er MED400X can be connected to your local network by means of a RJ45 CAT5 cable. The

Mede8er is supplied standard with a UPnP facility and a Samba Client that allows connection to your local

area network via a router or switch. You can share media files from your PC and stream media content to

the Mede8er and you can use the Mede8er as a Media Server to stream media content to other Mede8er’s

on your network.

Press the “setup” button on the Mede8er Remote or select “setup” tab on the home page. Select “Network”

option in the setup window and press “OK” to confirm. Network configuration allows for either automatic or

manual IP setup.

Follow the on-screen instructions to complete the network setup.

If you connect to a wired Ethernet network using DHCP, Mede8er automatically detects your network.

Alternately you may have to enter your IP address, subnet mask, router, and DNS addresses manually.

DHCP IP (AUTO)

Choose this option if you want your router to assign a dynamic IP address to Mede8er. This option is easy

to use and recommended for normal users.

FIX IP (MANUAL)

This option allows you to assign a static IP address to Mede8er. This option requires modifying network

settings of the Mede8er and is recommended for advanced users. To set a Static IP for your Mede8er, enter

the information IP Address, Subnet Mast and Gateway and DNS Server Address as relevant to your router

as in the screen below.

The IP address, Gateway information shown below is for reference purposes only. Do NOT copy these

DHCP IP Auto

Fixed IP Manual

Page8

Download the latest Mede8er Firmware from www.mede8erforum.com.

UnZIP or UnRAR the file and you will find one file named

install.img. Copy this file to the root directory of a Flash Drive.

Plug the flash drive into the Mede8er. Disconnect the power jack

at the rear of the Mede8er then plug it back in - Now press the

on/off button and hold it pressed for 10 seconds and then

release.

After approximately 15 seconds the LED on the Mede8er will flash

red-blue and you will get a progress bar on your TV display (some

TV's will not display this) wait until the Mede8er re boots itself +- 60 sec. Your Mede8er is now updated.

DO NOT REMOVE POWER DURING THE EMERGENCY RECOVERY PROCEDURE.

Page9

FIRMWARE UPDATE

WIRELESS NETWORK SETUP (basic)

The Mede8er MED400X is only compatible with the Mede8er Wireless Dongle 802.11n

(Other brands will not work)

Refer to User Instructions supplied with the Mede8er dongle for detailed wireless connection setup.

Power Up and hold on/off

button for 10 seconds

Only use model MED10WFB WiFi Dongle as it is supplied together with the USB extension cable base.

WIRELESS NETWORK CONNECTION

Plug the MED10WF into the USB extension base that was supplied with your Mede8er. Plug the USB cable

into one of the USB host ports on the side of the Mede8er. Extend the cable and try to place the base in a

position that is away from any metal object that could effect the RF signal strength. The best placement for the

dongle will depend on your particular environment. In order to get the best placement you may need to

extend the length with an additional USB extension cable (not supplied).

Note: The draft N standard prohibits using High Throughput with WEP or WPA2-PSK as the unicast cipher,

and your data rate will drop to 54 Mbps (802.11g) which is normal. Please try other encryption methods (WPA-

PSK), or choose to configure an unsecured profile.

The operating distance or range of your wireless connection can vary significantly based on the physical

placement of the Router and the WiFi Dongle.

For best results, place your Router:

* Near the center of the area in which your Mede8er will operate,

* In an elevated location such as a high shelf,

* Away from potential sources of interference, such as PCs, microwaves, and cordless phones,

* With the Antenna screwed in tight and in the upright position,

* Away from large metal surfaces.

MEDIA LIBRARY

Select Media Library from the home page and a new screen will load then select the source option you

require. You can choose between USB device, SD Card, Local HDD, USB DVD, Network, UPnP, NFS and

Playlist.

Once you have selected your source input you can browse to the folder or file you want to view by using the

navigation buttons on the remote control. The top tabs filter the files by All, Music, Photo and Movies. All files

and folders are displayed on the left hand side and a preview window is located on the right of the screen.

When you play music files a music window will appear at the bottom left of the screen.

The Media Library offers additional functionality when the “menu” button on the remote is pressed. Select a

file or folder and press the “menu” button and the menu dialogue will appear and display all the available

options. NOTE: *Add to Video Wall Option is only available on v4 firmware update.

Page10

Navigation Down

Navigation Right

Navigation Enter

Return

Navigation Up

Navigation Left

Menu Button

Return

Rename

Delete

Add to Video Wall*

Mark as watched

Remove watched indicator

Lock Folder

Unlock Folder

MEDIA LIBRARY - MUSIC PLAYER

Select any supported music file and the Music Player Screen will launch. If the music file has embedded

information tags then these will be displayed on the right hand side in the preview window area.

OFF - Repeat and Shuffle off

Repeat Track - Repeat the current track

Repeat All - Repeat all tracks in the folder. Shuffle off

Shuffle - Shuffle all tracks in the current folder

Track Number / Total Tracks Total Track Time Current Track Time Function Status

Track Name

Page11

Page12

COVER ART PREVIEW

Mede8er has the built in facility to preview cover art and will read folder.jpg and about.jpg inside a folder. All

you need to do in order to use this very useful feature is to arrange your collection with each video, in its own

folder. Place a JPEG picture together with each movie in the folder and you will be ready to go. You can

easily download DVD cover art for your picture or you can use the free program like Y2M (YAMJ to Mede8er)

to make your folder.jpg and about.jpg pictures that will contain additional content information such as

Synopsis, Cover, Rating, Year, Actors etc etc

We recommend that you first set your screen size in the

Setup menu before viewing in folder full screen cover art.

IMPORTANT:

Navigate to a folder. The image will be displayed in the preview window.

To view the preview in full screen press the SLOW

Press the Nav Up/Down to browse by cover art

PLAY FOLDER

Mede8er allows you to play a video file within a folder without the need to open the folder. Just focus on the

required folder and press the “Play” button. The first video file found in the folder will be played. The folder

play will only work with video files.

PLAY VIDEO FROM COVER ART

With Mede8er you can play the video directly from the cover art. Zoom the about.jpg by pressing the “slow”

then press Play or Enter to play the video.

WATCHED INDICATOR

Mede8er is equipped with a watched video indicator feature. To enable this function go to Setup -- Misc --

Watched Indicator and switch it on. Mede8er will mark the Video file with an eye icon once more than 10% of

a video has been watched. You can also mark a video as watched or clear the watched icon manually. To do

this, focus on the file you require to change and press the Menu button. The Menu dialogue screen will be

shown on screen and now you can mark the video as watched or remove the watched icon.

Play or Enter

Watched Indicator

Mark as watched

Clear Watched

Page13

LOCK FACILITY

Mede8er has a built in Lock facility designed to restrict access to certain folders.

Lock facility functions

a. System access areas such as Hard Drive Format screen and File Manager. (Pin Protection)

b. User Folders (Folder Protection)

You can enable or disable these options in the Setup menu

PIN PROTECTION

Enable Pin Protection to protect access to the Hard Drive Format area and the File Manager functionality.

Once the Pin Protection is enabled you will be prompted to enter your personal 4 digit pin code when trying to

gain access to these screens.

CHANGE PIN CODE

The default 4 digit Pin Code is 0000.

To change the Pin Code go to Setup -- Misc -- Password -- You will be prompted to enter the existing pin

code. For the first time you must enter the default factory pin ie 0000 then the Pin Code change screen will

open. Now enter your new personal 4 digit code by pressing the numbers on your remote. Once you have

entered the code press the “ENTER” button on the remote and the new code will be saved.

FOLDER PROTECTION

Folder protection will allow you to protect folders on the Local Hard Drive, USB Drive,

SD Card or Network Shares (write enabled shares). To protect a folder focus on the

folder and press the Menu button on the remote. Select the Lock icon and the folder will

be locked. To unlock a folder focus on the folder and press the Menu button on the

remote. Select the Unlock icon and you will be prompted to enter your Pin Code. After

the correct code is entered the folder will be Unlocked

RESET PIN CODE

To reset the Pin Code re-install the latest firmware and the Pin Code will default

back to 0000

Lock Folder

Unlock Folder

Page14

Page15

FILE OR FOLDER JUMP TO FACILITY

Mede8er has the built in jump facility that allows you to jump to a certain file or folder number on the Media

Library screen. This facility is very useful for users that store many files or folders in a directory as it allows

you to jump to any file or folder number quickly.

Enter the file or folder number you want to jump to. The number you enter will

be displayed on the top left of the screen.

20/500

Enter File or

Folder Number

After a brief pause the Mede8er will jump to the file or folder number you entered.

Display numbers entered

QUICK PLAYLIST FUNCTION

You can make quick Playlist on the fly while you are in Media Library view. To make a Music playlist you

must select the “MUSIC” tab on the top right of the screen.

Focus on the file you want to add to the Playlist and press the Select button on the remote. A yellow tick will

appear next to the file selected. To remove a selected file just focus on the file and press the Select button

again. Repeat the above to add more files. Once you have completed ticking the required files press the

Confirm button to add the files to the Playlist. In the Playlist view select the “MUSIC” tab and you can use

the same procedure to remove any files from the Playlist.

You cannot make a quick Playlist from an external drive or network source.

Page16

Select

Confirm

MAKING MULTIPLE M3U PLAYLIST’S

The Mede8er supports m3u playlist files that can be easily generated when the unit is connected to your

PC via USB or Samba Network. You can use any 3rd party programs to make your custom playlist’s and

we recommend Playlist Creator 3.6.2 as it is free and works well. In the case of Playlist Creator 3.6.2 you

must make the following changes under settings - change “Saving Playlist Entries” to Relative. The m3u

playlists will work on the internal Hard Drive, USB Drive or Network Share NOTE: The Playlist file ie

xxx.m3u must be saved to any folder on the same drive as the music source files. The xxx.m3u will not

work if you save it to the root directory of a Hard Drive. We suggest you make a “PLAYLIST” folder and

save all your playlists in this folder.Playlist Creator 3.6.2 can be downloaded free of charge from

http://www.oddgravity.com

Music Playlist Button

You can easily start the music playlist at any time by simply pressing the “Music” button on the remote.

Saving Playlist Entries must be changed to “Relative”

Enter Time

in Minutes

TIME BAR JUMP

The Mede8er has the built in Time Bar Jump facility that allows you to quickly jump to a certain time in the

video file you are viewing.

Display numbers entered

Press any numeric button on the Mede8er remote and the Time Bar will appear.

the Time Bar graphically displays the current time play time in minutes and

seconds and the total length of the video in minutes and seconds.

Enter the desired time you want to jump to on the remote controls numeric

keypad and the Mede8er will display the time you entered on the top left of the

screen and then automatically jump to this time in the video.

Page17

TIME BAR FF/RW

The Mede8er Time Bar is displayed during normal Fast Forward or Fast Rewind. Press Right or Left

Navigation buttons on the remote for video files (DVD files use the FF/RW buttons) The Time Bar will

appear and show you the current time in the video and the total length of the video in minutes. The Time

Bar will dynamically update the current position in minutes as you Fast Forward or Fast Rewind. To stop

Fast Forward or Fast Rewind press the enter button (Play button for DVD files).

Press any numeric button on the Mede8er remote and the Time Bar will appear.

the Time Bar graphically displays the current time play time in minutes and the

total length of the video in minutes.

FF or RW

DVD File

Video File

VIDEO GOTO

Press the GOTO button on the remote and the GOTO screen dialogue will open.

The GOTO screen allows you to change Time, Title, and Chapter. Press the Up or

Down Navigation button to change the value or enter the numeric values on the

remote. Press Enter once you have made your selection. To remove the screen

press GOTO again or press the Return button.

Enter Time

in Minutes

Page18

1.5x 2x 4x 8x 16x 32x

To change the Fast Forward speed just press the Right Nav Button and it will advance to the next higher

speed. To change to a slower speed press the Left Nav button. For DVD files use the FF/FRW buttons.

Time Title Chapter

93/105 01/03 02/19

SCREEN CALIBRATION

For more accurate Zoom functionality we suggest you calibrate your TV screen. Go to System Setup then

Video and select Screen Size.

Using the left, right, up and down navigation buttons you can adjust the red rectangle to fit the outer frame

of your TV screen. You can then do a fine adjustment to move the red rectangle so that it is just not visible.

Press Enter to save

Zoom To Width - This zoom function is designed for full

screen viewing of older 4:3 aspect videos on a 16:9 TV.

Zoom To Height - This zoom function is designed for full

screen viewing of ultra wide screen aspect videos on a 16:9

TV.

Zoom XY - The Zoom XY allows you to stretch the picture

horizontally and vertically independent of each other. This

zoom function is designed to correct videos encoded with the

wrong aspect ratio. You can also use the Zoom XY to zoom to

any zoom preference you may have. Once you have selected

your X and Y percentage press the ENTER button on the

remote to store the settings. To re-adjust the Zoom XY you

need to exit and then select Zoom XY again.

H X:100% Y:100%

ENTER

ZOOM

The Mede8er is equipped with advanced zoom functionality and once your screen is

calibrated you can zoom intuitively to either WIDTH or HEIGHT or XY of the video.

Page18

Zoom To Width

X:100% Y:100%

Zoom in/out

OFF

Zoom To Height

Page is loading ...

Mede8er MED400X MINI User manual

Brand: Mede8er

Model: MED400X MINI

Category: Digital media players

Type: User manual

Download PDF

report

Mede8er MED400X MINI User manual

Mede8er MED400X MINI User manual

Related papers

Other documents