Eclipse CD8051 User manual

OWNER'S MANUAL

We appreciate your purchase of this tuner.

Please read through this manual for correct operation.

We suggest that after reading it you keep this manual

in a safe place for future reference.

ESN E8 CD Tuner with

CDC/E-COM/DSP Control and NOB Remote

MODEL CD8051

DISC

BAND MODE

MUTE

ILLUMI

PWRE-COM

TRACK

TUNE SEEK

P

U

S

H

-

M

O

D

E

2

For your safety in using the

CD8051

Warnings and caution signs, illustrated below, are posted

throughout this manual as well as on the CD8051. They show

safe and correct ways to handle the product so as to prevent

personal injury to you and others and avoid damage to property.

Before reading through the manual, take time to read through

and learn the important information listed in this section.

This sign indicates a situation in which

incorrect handling through disregard of a sign

might result in death or serious personal

injury.

This sign indicates a situation in which

incorrect handling through disregard of a sign

might result in personal injury or may result

solely in damage to property.

•

Do not modify this system for use other than that specified

herein. Also, do not deviate from the installation procedures

described herein; Eclipse will not be held liable for damages

including, but not limited to serious injury, death or property

damage resulting from installations that enable unintended

operation.

•

This unit is intended for operation in DC 12-volt, negative-

grounded vehicles only. Never use it in 24-volt vehicles such

as heavy trucks or diesel cars with cold-region specifications.

•

Do not change CDs while driving. Doing so may result in an

accident.

Warning

Caution

Warning

3

•

Do not place the vinyl storage bag over a person. It may

cause a serious accident or death by suffocation.

•

Do not adjust the controls while driving the car. To adjust the

controls, stop the car in a safe location.

•

To prevent accidents, store batteries for the remote control

out of the reach of small children. In case a child swallows a

battery, consult a physician immediately.

•

Do not disassemble or rebuild this product. Doing so may

cause an accident, fire or electrical shock.

•

When it is necessary to replace the fuse, always use a fuse of

the correct rating (number of amperes). Use of fuses with

higher amperage ratings may cause a fire.

•

Do not operate the product in a malfunctioning condition, for

instance, when the audio does not play. Doing so may result

in an accident, fire or electrical shock.

•

If an abnormal situation occurs, such as foreign matter

entering or liquid splashing on the product, or smoke or a

strange odor emitting from the unit, shut off the product

immediately and consult the dealer from whom you purchased

it. Continued operation may cause an accident, fire or

electrical shock.

•

Do not install this product in locations where it may obstruct

the driver's view, or where it may endanger passengers in the

vehicle. Otherwise, an accident or injury may result.

•

Do not install this product in locations where it may interfere

with the operation of the steering wheel, shift lever, brake

pedal, etc. Otherwise, an accident or injury may result.

•

When installing this product, never use existing nuts or bolts

that secure parts of the fuel tank, or the steering or braking

systems. Otherwise improper steering or braking or a fire may

result.

Warning

4

•

To prevent a short circuit from occurring, disconnect the

battery's negative terminal before installing this product.

Otherwise, an electric shock or injury may result.

•

When using an existing nut and/or bolt from the vehicle to

ground this product, do not use any that secure parts of the

steering or braking systems. Otherwise, an accident may

result.

•

Bundle cables and harnesses with electrical tape or wire ties

to prevent them from interfering with moving parts. If they

should entangle the steering wheel, shift lever or brake pedal,

an accident may result.

•

Never supply power to another electrical appliance by splicing

or tapping into this product's power lead (wire). Otherwise, the

current capacity of the wire will be exceeded, resulting in a fire

or electric shock.

•

Never attempt to disassemble or modify the product.

Otherwise, an accident, fire or electric shock may result.

•

When installing the product into a vehicle with a passenger

side air bag, do not secure it to the air bag's cover or in places

where it may impede air bag deployment. Otherwise, proper

air bag operation may not be ensured in the event of an

accident, causing injury or death.

•

When making holes using a drill or similar tool, be sure to wear

protective eyewear. Otherwise, an injury such as loss of

eyesight may result.

•

Exposed wires must be insulated with electrical tape.

Otherwise, a short circuit, fire, or electric shock may result.

Warning

5

•

Play the audio at a moderate volume level that permits you to hear

sounds from outside the car. Driving without being able to hear

outside sounds may result in an accident.

•

Keep foreign objects out of the disc slot. They may cause fire or

electrical shock. Another possibility is that discs may be damaged

or become stuck.

•

Do not stick your fingers or hands into the disc slot. Doing so

may cause personal injury.

•

This product must be operated only as on-board equipment, or it

may cause electrical shock or injury.

•

Do not play distorted sounds for long periods of time;

the speakers may overheat and cause a fire.

•

Never use batteries other than those specified. Do not mix new

and old cells. Doing so may cause a fire or personal injury due to

a battery explosion or chemical leaks.

•

Pay attention to the (+) and (-) polarity of the battery when

installing them in the product. Incorrect installation may cause

personal injury or product damage spoilage due to a battery

explosion or chemical leakage.

•

For best results, this product should be installed by a professional

installer.

Contact the dealer whom you purchased the product for an

appointment.

•

When installing this product, be sure to use the supplied mounting

hardware. If parts other than those supplied are used, the unit

may be damaged internally, or may not be held in place securely

and become dislodged.

Caution

6

•

Avoid installing this product in places where it may get wet,

such as near windows, or in places that are moist or dusty.

Presence of liquid, moisture or dust inside this product can

cause short circuiting, resulting in smoke or fire.

•

Do not install this product in locations where it cannot be

fastened securely, such as places subject to frequent

vibration. Otherwise, it may become dislodged and cause an

accident or injury.

•

Do not block this product's vent or heat sink. If either is

blocked, excessive heat build-up may occur and cause a fire.

•

If this product is not connected properly, a short circuit, fire or

accident may occur.

•

When routing cables, use care so that they do not contact

sharp metal parts such as brackets or screw tips. Otherwise,

a short circuit, electric shock, fire or accident may result.

•

Do not obstruct the vent on this product. If blocked, excessive

heat build-up may occur and cause a fire.

Caution

7

Table of Contents

Operating precautions .............................................. 10

Notes on operation ...................................................................... 10

About compact discs .................................................................. 12

About cleaning a CD ................................................................... 15

Names of controls and parts .................................... 16

ESN (Key CD) security operating procedure ........... 17

How to program the Key CD ....................................................... 17

How to cancel the Key CD .......................................................... 18

How to change the Key CD ......................................................... 19

How to resume normal operation (ESN security lock out) .......... 20

What happens if an incorrect CD is inserted? .............................. 21

How to turn the security indicator on/off ...................................... 22

How to read the Electronic Serial Number ................................... 23

Basic operation ......................................................... 24

Turning the power on and off ...................................................... 24

Listening to a CD ......................................................................... 24

Listening to the tuner ................................................................... 25

Adjusting audio volume ............................................................... 26

Displaying the clock ..................................................................... 26

Others ......................................................................................... 27

How to operate the CD player .................................. 36

Listening to CDs .......................................................................... 36

Advancing to the next track or returning to the beginning of the

track being played ....................................................................... 37

Playing the beginning of tracks (SCAN) ........................................ 37

Repeating the same track (REPEAT) ............................................ 38

Playing tracks in random order (RANDOM) .................................. 38

Switching a CD to pause / play ................................................... 38

Ejecting the disc .......................................................................... 39

Creating a title for a CD ............................................................... 40

Changing a previously set title ..................................................... 42

Deleting a previously created title ................................................. 43

Changing the number of CD titles ................................................ 44

Displaying CD text ....................................................................... 45

8

How to operate the tuner .......................................... 46

Tuning to a station ....................................................................... 46

Entering stations into memory automatically

(The automatic preset mode: ASM) ............................................ 47

Manually setting stations into memory ......................................... 48

Preset station scan ...................................................................... 49

Setting a station name ................................................................. 50

Deleting a station name ............................................................... 52

Setting a band category .............................................................. 53

Deleting a band category ............................................................. 55

Changing the number of bands ................................................... 56

FM reception characteristics ........................................................ 57

How to use the NOB remote control ........................ 60

Precautions in use of the remote control ...................................... 60

Cleaning the remote control ........................................................ 60

Turning the power on/off ............................................................. 61

Adjusting the audio volume .......................................................... 61

Switching playback modes .......................................................... 62

How to play the tuner .................................................................. 62

How to play CDs ......................................................................... 63

Illuminating the NOB remote control ............................................ 64

Enabling the optional E-COM feature ........................................... 64

Switching the remote control settings .......................................... 65

Replacing the battery .................................................................. 66

How to use an optional Card remote control .......... 68

Turning the power on/off ............................................................. 68

Adjusting the audio volume .......................................................... 68

Switching playback modes .......................................................... 69

How to play the tuner .................................................................. 69

How to play CDs ......................................................................... 70

Switching the remote control settings .......................................... 72

Replacing the battery .................................................................. 73

How to operate the receiver with an

optional CD changer connected .............................. 74

Basic operation ........................................................................... 74

9

How to operate the receiver with an optional

DSP/EQ unit or Digital Sound Processor connected ...

77

How to operate the DSP functions .............................................. 77

How to operate the EQ functions ................................................ 81

How to operate the Digital Sound Processor ............................... 84

If you have a question: .............................................. 92

Displayed information (for troubleshooting) ................................ 93

Specifications ............................................................ 96

Before installation ..................................................... 97

Components ............................................................................... 97

Mounting instruction ................................................. 98

Mounting the main unit ................................................................ 98

Names of lead wires and destinations ....................................... 100

System ...................................................................................... 101



Operating precautions

<Your CD8051 will perform well over a long period of time through correct

handling and care.>

• For your safety, play only at volume levels that allow outside sounds to

be heard.

•Use only audio compact discs.

This player can only play compact discs

bearing the logo shown to the left.

• It may not be possible to play back some

tracks on CD-Rs.

• It may not be possible to play back CD-Rs

with certain characteristics, or CD-Rs which

are scratched, dirty, or which have been left

inside a vehicle for long periods.

• CDs cannot be played back until all

sessions recorded on the CD-R have been

closed.

• CD-RW discs cannot be played back.

• Do not insert anything other than a CD into

the disc slot.

Do not insert any foreign objects, such as

coins or credit cards, into the disc slot. Be

especially watchful of children’s mischief in

this regard.

•Avoid severe mechanical shock.

When the player is subjected to severe

vibration while traveling over a rough

surface, playback may be intermittent.

When a situation like this occurs, resume

playback after returning to a smoother

road.

Notes on operation

Operating precautions

10

• About dew condensation.

In cold or rainy weather, just as the interior

glass surface gets fogged, dew (water

condensation) may also settle on the deck.

When this occurs, disc playback may

become intermittent or impossible.

Dehumidify the air in the vehicle for a while

before resuming playback.

• Cleaning the disc slot.

The disc slot tends to get dusty. Clean it

occasionally to prevent accumulated dust

from scratching the discs.

11

Operating precautions

12

• The signal recorded on a compact disc is read by a laser beam, so

nothing touches the disc surface. A scratch on the recorded surface or

a badly warped disc may cause deteriorated sound quality or

intermittent playback. Observe the following precautions to ensure high

quality sound performance:

• Do not leave an ejected disc in the disc

slot for very long; the disc may warp.

Discs should be stored in their cases and

kept away from high temperature and

humidity.

• Do not stick a piece of paper or tape on,

nor write on or scratch either side of a

disc.

• Discs spin at a high speed inside the

deck. Keep cracked or warped discs out

of the player to avoid damaging it.

• Avoid touching the recorded surface when

handling a disc; handle discs by their

edges.

About compact discs

13

Operating precautions

About CD accessories

• Do not use accessories

(stabilizers, protective seals, laser

lens cleaners, etc.) sold for

“improving sound performance”

or “protecting CDs.” The

changes in CD thickness or

outside dimensions made by

these accessories may cause

problems in the player.

About brand new CDs

• You may notice that some brand

new discs are rough around the

center hole or outside edge.

Remove the rough edges with

the side of a ballpoint pen, etc.

Rough edges may prevent

proper loading in the deck.

Flakes from the rough edges

may also stick to the recorded

surface and interfere with

playback.

Rough Edges

Ballpoint

pen

Flakes

Recorded surface

Rough

Edges

• Please be sure NOT to attach any

ring-shape protector (or other

accessory) to your discs. Those

protectors are commercially

available and said to protect disc

and to improve sound quality

(and antivibration effect), but they

can do more harm than good in

regular uses. The most common

problems are Insert/Eject related

problems and "No playback"

problems due to the protectorring

that came off in the disc

mechanism.

Operating precautions

14

About borrowed CDs

• Do not use a CD with glue or

remnants of adhesive tape or

labels. They may cause the CD

to get stuck inside or damage

the deck.

How to remove CDs

• When removing the ejected disc,

pull it straight out along the slot.

Pressing downward in the

process may scratch the

recorded surface of the disc.

OKAY

NO GOOD

About irregularly-shaped CDs

• Specially-shaped CDs, like

heart-shaped or octagonal CDs,

cannot be played. Do not

attempt to play them, even with

an adapter, since they may

damage the player.

15

Operating precautions

• Use a commercially available compact disc

cleaner to clean a CD, wiping lightly from

the center to the edge.

• Do not use benzine, thinner, LP record

spray or other cleaners on CDs. They may

damage a CD’s finish.

XXXX

About cleaning a CD

Names of controls and parts

161616



Names of controls and parts

Front view

NOTE : Double function button  "E-COM" & "MUTE" functions

Though the words "press" and "tap" are used in the text for the

operation of the [ TU ] button and [ BND ] button, the

button is actually slid in the or direction.

With the front open



Caution



Never place an object or rest your hands or the like on the

front panel.

Disc slot

[MODE] button

[CUSTOM] button

[RESET] button[AUDIO CONTROL]

button

Buttons [1] to [6]

[FUNC] button

[OPEN] button

[E-COM] button

[ BND ] button

[ TU ]

button

[SOURCE] button

17

ESN (Key CD) security operating procedure

[FUNC] button

Button [1]



ESN (Key CD) security operating

procedure

 How to program the Key CD

1 .

Check that the Power is OFF.

2 .

Press and hold button [1], then the [FUNC]

button, and hold both for more than one

second.

A [SEC] message appears, then in two seconds it will

change to [DISC].

The front panel opens; the CD8051 is now ready to

accept your Key CD in the CD slot.

3 .

Insert the CD into the slot.

The front panel closes.

A [SEC] message appears, the front panel opens, then

the Key CD is ejected.

[FUNC] button

Button [1]

ESN (Key CD) security operating procedure

18

• If there is a problem with the inserted CD, an [ERR]

message will appear for two seconds and the CD will be

ejected. Reinsert the ejected CD.

• If a CD causes the [ERR] message to appear twice in a

row, a [CHANGE] message will appear for two seconds.

Try another CD.

• The Security indicator will flash whenever the vehicle’s

ignition is switched off.

 How to cancel the Key CD

1 .

Turn OFF the Power.

2 .

Press and hold button [1], then the [FUNC]

button, and hold both for more than one

second.

A [SEC] message appears, then in two seconds it will

change to [DISC].

The front panel opens; the CD8051 is now ready to

accept your Key CD in the CD slot.

3 .

Insert your Key CD into the slot.

The front panel closes.

A [CANCEL] message appears, the front panel opens,

then the Key CD is ejected.

The Key CD is cancelled.

19

ESN (Key CD) security operating procedure

•

This process cancels the protection for the ESN

deck.

• If power to the ESN deck is disconnected, then

reconnected, a Key CD will not need to be inserted in

order to return the unit to normal operation.

•Inserting a CD other than the Key CD will not cancel the

protection. Instead, the display will show [ERR] for two

seconds, then the normal CD playback mode will activate.

 How to change the Key CD

1 .

First, cancel the existing Key CD.

Refer to “How to cancel the Key CD.”

2 .

Next, program a new Key CD.

Refer to “How to program the Key CD.”

ESN (Key CD) security operating procedure

20

 How to resume normal operation

(ESN security lock out)

If power is disconnected while ESN security is active (a Key

CD was programmed), operation is disabled until power is

restored and the unit unlocked. Follow this procedure to

resume normal operation.

1 .

When the power is turned on after

disconnecting the battery power, a [SEC]

message will appear for two seconds.

Thereafter, the message changes to [DISC]

and the CD8051 is ready to accept your Key

CD into the slot.

2 .

Insert your Key CD.

If the correct CD is inserted, an [OK] message will

appear for two seconds and the CD will begin playing.

• If an incorrect CD is inserted, an [ERR] message will

appear for two seconds, after which the CD will be

ejected.

• You must use the same CD used for Key CD

programming; a duplicate CD may not work properly.

Page is loading ...

Eclipse CD8051 User manual

Related papers

Other documents