Lightolier 48339ALU User manual

Type
User manual

Lightolier 48339ALU is a 3-Light, T-5 Pendant with a metallic aluminum powder-coated finish, suitable for damp locations. It has a maximum ceiling slope of 45°, complies with California earthquake codes, and has a swivel that allows for a maximum of 15° splay outward from vertical. The lamp enclosure is extruded aluminum and the lampholders are G5 (Mini-Bipin) base with rotor for securing the lamp. The electronic ballast has a universal voltage of 120V-277V and a ballast factor of 0.97. It requires 3 x 39W T-5 HO, Mini-Bipin lamps (not included).

Lightolier 48339ALU is a 3-Light, T-5 Pendant with a metallic aluminum powder-coated finish, suitable for damp locations. It has a maximum ceiling slope of 45°, complies with California earthquake codes, and has a swivel that allows for a maximum of 15° splay outward from vertical. The lamp enclosure is extruded aluminum and the lampholders are G5 (Mini-Bipin) base with rotor for securing the lamp. The electronic ballast has a universal voltage of 120V-277V and a ballast factor of 0.97. It requires 3 x 39W T-5 HO, Mini-Bipin lamps (not included).

Architectural Decorative Soli 48339ALU
Page 1 of 1 3' Atria: 3 Light, T-5 Pendant
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • 0704
Features
1. Canopy: 18 GA. (.048) die formed steel. See above for finish.
2. Crossbar: 14 GA. Die formed steel. For mounting to 4" octagonal
junction boxes.
3. Swivel: Die cast aluminum. Allows for a maximum ceiling slope of 45°.
Complies with California earthquake codes.
4. Stem: 5/8" diameter steel tubing. See above for finish.
5. Pivot Joint: Formed steel. Allows each luminaire arm to splay outward to a
maximum of 15° from vertical.
6. Housing: Extruded aluminum. See above for finish.
7. Lamp Enclosure: Extruded aluminum. See above for finish.
8. Center Support: Heavy wall steel tubing. See above for finish.
9. End Cap: Die Cast aluminum. See above for finish.
Lamping (by others)
Linear Fluorescent: 39W T5 HO, Mini Bipin
Electrical
Lampholders: G5 (Mini-Bipin) base with rotor for securing lamp. cULus Listed.
Ballast: Electronic, HPF, Universal voltage 120V-277V.
39 Watt
Voltage 120V 277V
Total Input Watts 137 125
Max. Line Current (Amps) 1.07 0.46
Ballast Factor 0.97 0.97
Min. Starting Temp: 0°F/-18°C
THD<10%
Options:
Suspension Kits (for longer drops)
Catalog No. Description Finish
4SXT48AL 48" Stem Metallic Aluminum Powder Coat
4SXT96AL 96" Stem Metallic Aluminum Powder Coat
Labels:
cULus Listed. Suitable for Damp Locations
2
3
1
4
6
7
8
9
5
Ø7"
(178)
1" (25)
45°
MAX.
34 5/8"
(879)
15°
26 3/8"
(670)
25"
(635)
11 3/4"
(298.5)
11"
(279)
40875- Glass Diffuser
40915- Acrylic Diffuser
Canopy/Stem
Detail
54"
(1372)
32 1/8"
(816)
7/8"
(22)
6 1/2" (165)
( ) Denotes dimensions in mm
Note: Luminaire can be ordered with or without diffuser shield. Order each separately.
Fixture Ordering Information
Catalog No. Finish Wattage Voltage Lamping
48339ALU Metallic Aluminum Powder Coated 3 x 39W 120/277V T-5 HO, Mini-Bipin
HO denotes High Output
Diffuser Ordering Information (Order diffuser separately)
Catalog No. Description Dimensions Finish
40875 Curved Glass Diffuser (3/16" Thick) 6 1/2" W x 32 1/8" L Etched outside/ White ceramic coated inside. Polished edges.
40915 Curved Acrylic Diffuser (3/16" Thick) 6 1/2" W x 32 1/8" L Translucent white acrylic. Textured both sides.
  • Page 1 1

Lightolier 48339ALU User manual

Type
User manual

Lightolier 48339ALU is a 3-Light, T-5 Pendant with a metallic aluminum powder-coated finish, suitable for damp locations. It has a maximum ceiling slope of 45°, complies with California earthquake codes, and has a swivel that allows for a maximum of 15° splay outward from vertical. The lamp enclosure is extruded aluminum and the lampholders are G5 (Mini-Bipin) base with rotor for securing the lamp. The electronic ballast has a universal voltage of 120V-277V and a ballast factor of 0.97. It requires 3 x 39W T-5 HO, Mini-Bipin lamps (not included).

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI