ONKYO TX-SR444 User manual

En

TX-SR444

AV RECEIVER

The Basic Manual includes information needed when starting up

and also instructions for frequently used operations. The Advanced

Manual has more detailed information and advanced settings.

Basic Manual

CONTENTS

Front Panel ......................................................................... 3

Rear Panel.......................................................................... 4

Step 1: Connections �� 5

1 Connecting the TV and Players ....................................... 5

･ Connection to TV ......................................................... 5

･ Connection with a player that has a HDMI jack ........... 6

･ Connection with a player that does not have a

HDMI jack ..................................................................... 6

2 Connecting the AM/FM Antenna...................................... 6

3 Connecting Speakers ...................................................... 7

･ ZONE A Connection ..................................................... 7

･ Height speaker types ................................................... 7

･ ZONE B Connection ..................................................... 9

･ Instructions on how to connect speakers ..................... 9

Step 2: Setting Up ��10

1 Turning the Power On ................................................... 10

2 Making Automatic Speaker Setting ............................... 10

3 HDMI Setup ....................................................................11

･

HDMI CEC (RIHD) .........................................................11

･ HDMI Standby Through ..............................................11

･ ARC (Audio Return Channel) ......................................11

Step 3: Playing Back ��12

1 Basic Operations ........................................................... 12

･ Part names and functions of the remote controller .... 12

･ Display ....................................................................... 13

2 Bluetooth ....................................................................... 13

3 AM/FM Radio ................................................................ 13

4 Multi-zone ...................................................................... 14

5 Quick Setup Menu ......................................................... 14

6 Other useful functions ................................................... 15

Troubleshooting ................................................................ 16

Specifications ................................................................... 17

Table of display resolutions .............................................. 18

Resolutions supported by HDMI ....................................... 18

Supplied Accessories ..........................................Back cover

En-2

Features

● Equipped with 7 ch amplifier

● Supports playback in Dolby Atmos format which

provides 360-degree placement and movement of

sounds including overhead sound

● Dolby Surround listening mode expands 2 ch, 5.1 ch or

7.1 ch source to available speaker configurations

● Equipped with 4K compatible HDMI IN/OUT jacks (To

play 4K or 1080p video, use a high speed HDMI cable

or high speed HDMI with Ethernet cable)

● Supports the HDMI Standby Through function which

allows signal transmission from players to the TV in

standby state

● Supports HDCP2.2, a strict copy-protection for providing

high quality content

● Supports ARC (Audio Return Channel)

● Supports Bluetooth connection

● A/V Sync Function to correct deviation of audio and

video

● Multi-zone function which allows you to play the same

audio in another room as the main room

● 32 bit DSP (Digital Signal Processor) with excellent

calculation performance

● Music Optimizer™ for compressed digital music files

● Phase Matching Bass System

● Automatic speaker setup available using supplied

calibrated microphone (AccuEQ Room Calibration)

● Supports multi-language on-screen displays

English, German, French, Spanish, Italian, Dutch,

Swedish, Russian

1

, Chinese

2

1

European, Australian and Asian models only

2

European, Australian, Taiwanese and Asian models only

OSD is not displayed when the input selector is "BLUETOOTH". Use

the display on the main unit when operating the unit.

Refer to the back cover for supplied accessories.

En-3

1

23 89

FG

HJ

4

K

56 7

I

MLN

(European, Australian

and Asian models)

Front Panel

1 zON/STANDBY button: Turns the unit on or into

standby mode.

2 BLUETOOTH indicator: Flashes while pairing with a

Bluetooth-enabled device is in progress and stays lit

when pairing is completed.

3 DOLBY ATMOS indicator: Lights when playing Dolby

Atmos.

4 ZONE A and ZONE B buttons: Control the multi-zone

function.

5 Remote control sensor: Receives signals from the

remote controller.

6 DIMMER button (North American and Taiwanese

models): Switches the brightness of the display.

RT/PTY/TP button (European, Australian and Asian

models): Can be used when receiving the station

transmitting text information.

7 Display: Refer to page 13 for details.

8 SETUP button: Used when making settings.

9 Cursor buttons,

l

TUNING

j

button,

d

PRESET

c

button and ENTER button: Move the cursor and

confirms the selection. When listening to AM/FM

broadcasting, tune in to the station with

l

TUNING

j

or

select the registered station with

d

PRESET

c

.

F RETURN button: Returns the display to the previous

state.

G MASTER VOLUME: Allows you to adjust the volume.

H MUSIC OPTIMIZER button: Turns on/off the MUSIC

OPTIMIZER function that improves the quality of the

compressed audio.

I PHONES jack: Stereo headphones with a standard plug

are connected.

J TONE and Tone Level buttons: Adjust the high tone

and low tone.

K Input selector buttons: Switch the input to be played.

L LISTENING MODE buttons: Allow you to select the

listening mode.

M AUX INPUT VIDEO/AUDIO jacks: A video camera or

such other device is connected.

N SETUP MIC jack: The supplied speaker setup

microphone is connected.

En-4

1 2 3 4 5 6 7

8 9 F G H I J K

(Taiwanese models)

Rear Panel

1 TUNER AM/FM (75Ω) terminal: The supplied antennas

are connected.

2 to TV jack: Connect to a TV using a HDMI cable.

Change the input selector to "TV" to hear audio from the

TV.

¼ If your TV does not support ARC, you need connection F in addition to

this connection.

3 BD/DVD jacks: Connect to a Blu-ray Disc Player or

DVD Player using a HDMI cable. This corresponds with

the "BD/DVD" input selector.

4 CBL/SAT jack: Connect to a Cable Set-top box using a

HDMI cable. This corresponds with the "CBL/SAT" input

selector.

5 GAME 1 jack: Connect to a Game console using a

HDMI cable. This corresponds with the "GAME 1" input

selector.

6 STRM BOX jack: Connect to a Streaming Media Player.

When a power supply is required, connect using a USB

cable to the POWER OUT port. This corresponds with

the "STRM BOX" input selector.

7 Power cord (North American, European, Australian

and Asian models)

AC INLET (Taiwanese models): The supplied power

cord is connected.

8 RI REMOTE CONTROL jack: An Onkyo product with RI

jack can be connected and synchronized with this unit.

9 CD jack: Connect to audio equipment such as a CD

Player using a digital optical cable. This corresponds

with the "CD" input selector.

F TV jack: If your TV does not support ARC, you need

to connect this jack to the audio output jack on the TV,

in addition to connection 2. This corresponds with the

"TV" input selector.

G GAME 2 jack: Connect a game console that has

component video jacks. This corresponds with the

"GAME 2" input selector.

H VCR jacks: Connect to a Video Cassette Recorder. This

corresponds with the "VCR" input selector.

I SUBWOOFER jacks (ZONE A): A subwoofer with built-

in amplifier placed in ZONE A is connected.

J SPEAKERS jacks (ZONE A): Speakers placed in

ZONE A are connected. Up to 7 channels of speakers

can be connected.

K SPEAKERS jacks (ZONE B): Speakers placed in

ZONE B are connected. 2 channels of speakers can be

connected.

Step 1: Connections

En-5

HDM

I

IN

HDMI

OUT

AV OUT

Connection example

1 Connecting the TV and Players

Before Start

● Connect this unit between the TV and

player.

● To select the source to play, select

the input selector button with the

same name as the jack to which it is

connected. Input switches automatically

when you have connected equipment

that conforms to the CEC (Consumer

Electronics Control) standard to this unit

using a HDMI cable. ()

● This allows audio and video signal

transmission from players to the TV

even if this unit is in standby. (HDMI

Standby Through function) ()

● The power cord must be connected

only after all other connections are

completed.

¼ It is necessary to make appropriate settings to enable

this function. See "3 HDMI Setup" of "Step 2: Setting

Up".

Cable used for connection (sold

separately)

HDMI cable

Component video cable

Composite video cable

Digital coaxial cable

Digital optical cable

Analog audio (RCA) cable

Connection to TV

Connect the "to TV" jack and the HDMI IN

jack of the TV with a HDMI cable. This is

the only connection necessary with a TV

that supports ARC. If your TV does not

support ARC, you need to connect the "TV"

jack to the audio output jack on the TV with

a digital optical cable or an RCA cable, in

addition to this connection to the "to TV"

jack.

¼ This function enables you to play the audio from

the TV through the speakers of this unit just by

connecting this unit and the TV with a single HDMI

cable. To use the ARC function, connect to the

ARC compatible HDMI jack of the TV and make

appropriate settings on this unit. See "3 HDMI Setup"

of "Step 2: Setting Up".

DIGITAL

OPTICAL

OUT

AUDIO

OUT

TV

¼z Audio connection with a TV not supporting ARC

¼ Select an appropriate

connection for your TV.

Step 1: Connections

En-6

2 Connecting the AM/FM Antenna

Connect the antennas to listen to AM/FM broadcast. When

listening to the broadcast for the first time, adjust the

antenna position and orientation to get the best reception.

AM loop antenna

(supplied)

Indoor FM antenna

(supplied)

Fix with a tack on

the wall.

(North American and

Taiwanese models)

(European, Australian

and Asian models)

Assemble the AM loop antenna (supplied).

Connection with a player that has a HDMI jack

Connect to the "BD/DVD", "CBL/SAT", "GAME 1", and

"STRM BOX" jacks using a HDMI cable. Connect the

equipment to the corresponding jack, for example a Blu-ray

Disc Player to "BD/DVD", so that it is easy for you when

selecting with the input selector. Connect a Streaming

Media Player to the "STRM BOX" jack. When a power

supply is required, connect using a USB cable to the

POWER OUT port. ()

¼ The POWER OUT jack supports a 5V/1A power supply.

Connection with a player that does not have a

HDMI jack

Connect equipment with video output jacks to the "BD/

DVD", "CBL/SAT", "GAME 2", and "VCR" jacks. Connect

with component video cable or composite video cable for

video signals and digital coaxial cable or RCA cable for

audio signals.

Connect audio equipment such as a CD Player using a

digital optical cable or an RCA cable to the "CD" jack.

● Video signals input to the component video input or

the composite video input will be upconverted to HDMI

signals and then output from the "to TV" jack. When

upconverting video signals input to the component video

input for output from the HDMI OUT jack, set the output

resolution of the player to 480i or 576i. If the input has

480p/576p or higher resolution, a message prompting

you to change the resolution setting will appear. If your

player does not support 480i or 576i output, use the

composite video jack.

● Connection with a digital coaxial cable or digital optical

cable is necessary for playback of digital surround

sources such as Dolby Digital. The digital in optical jack

of the unit has a cover, push in the cable against the

cover as it is turned inside.

Step 1: Connections

En-7

Characteristics of speaker types

"# output front stereo sound and $ outputs center sound

such as dialogs and vocals. %& create back sound field.

' reproduces bass sounds and creates rich sound field.

Connecting 78 speakers, 9F, or GH speakers enables

playback in 7.1 ch configuration. 78 (back) speakers

improve sense of envelopment created by back sound

field as well as seamlessness of back sounds, providing

more natural sound experiences in the sound field. 9F

and GH (height) speakers produce surround effects on a

height plane. Note that this unit can perform optimal sound

field processing for the type of height speakers actually

installed and registered in automatic speaker settings.

Height speaker types

Installing speakers in ceiling

a b

f

d

e

c

a b

Top Front

c d

Top Middle

e f

Top Rear

Ceiling speakers, etc. are used for maximizing effects in

Dolby Atmos or Dolby Surround listening mode. Install

Top Front speakers so that they are positioned at a point

between directly above the listening position and directly

above the front speakers. Install Top Middle speakers so

they are directly above the listening position. Install Top

Rear speakers so they are positioned at a point between

directly above the listening position and directly above

the back speakers. You can select ab, cd, or ef on

the unit. For connection with the unit, use the SPEAKERS

BACK/HEIGHT terminals.

● Dolby Laboratories recommends placing the speakers

as described in "Installing speakers in ceiling" to obtain

the best Dolby Atmos effect.

3 Connecting Speakers

ZONE A Connection

#

$

%

&

'

7

8

9

G

H

F

"

" #

Front speakers

$

Center speaker

% &

Surround speakers

'

Subwoofer

7 8

Back speakers

9 F

Height speakers (Front High)

G H

Height speakers (Rear High)

● 5.1 ch: "#$%&'

● 7.1 ch: "#$%&'+78, or

"#$%&'+9F, or

"#$%&'+GH

78, 9F speakers and GH speakers share the same speaker terminals. Select one and make the connection.

● To enjoy the Dolby Atmos listening mode, height speakers or back speakers need to be installed. There are a variety of

height speakers apart from this type. see the next section for details.

Important:

Connect speakers with 6 Ω to 16 Ω impedance. Using a speaker with less impedance than the supported value may result in

failure.

Step 1: Connections

En-8

'

Subwoofer with

built-in power

amplifier

&

Surround R

8FH

Right back

Or right height

79G

Left back

Or left height

%

Surround L

$

Center

1/2˝-5/8˝

(12-15 mm)

3/8˝-1/2˝

(10-12 mm)

#

Front R

"

Front L

A speaker

configuration where

only one back

speaker is connected

is not supported.

Using Dolby Enabled Speakers

g

i

h

j

g h

Dolby Enabled Speakers (Front)

i j

Dolby Enabled Speakers (Surround)

A Dolby Enabled Speaker is specially designed to be used

as a height speaker. There are two types of Dolby Enabled

Speakers; one type is designed to be placed on top of other

speakers such as front speakers and surround speakers,

and the other type is designed to be integrated with normal

speakers. Dolby Enabled Speakers placed with their

diaphragms facing toward the ceiling create higher effect

in the Dolby Atmos and Dolby Surround listening modes

by providing sounds echoing off the ceiling. You can select

gh or ij on the unit. For connection with the unit, use

the SPEAKERS BACK/HEIGHT terminals.

When playing Dolby Atmos, the speakers required depend

on how you have setup your back speakers or height

speakers. The following shows combinations of speakers.

1 Back



2 Front High

 

3 Rear High

 

4 Top Front

 

5 Top Middle

 

6 Top Rear

 

7 Dolby Enabled Speaker (Front)

 

8 Dolby Enabled Speaker (Surround)



Connection

pattern

Front

Center

Surround

Back or Height

Required  Optional  Connection of a subwoofer is optional.

Step 1: Connections

En-9

ZONE B Connection

You can listen to audio in a room (called ZONE B) other

than ZONE A (the room where this unit is located).

3/8˝-1/2˝

(10-12 mm)

Instructions on how to connect speakers

Cut and remove the plastic coating from the end of the

speaker cable, twist the core and connect it to the terminal.

Be sure to make correct connection between the unit's

jacks and speaker's jacks (+ to + and - to -) for each

channel. If connection is wrong, a bass sound may become

poor due to reverse phase. The subwoofer jack supports

connection of a subwoofer with built-in power amplifier.

Set the cut-off filter selection switch of the subwoofer to

DIRECT. If the subwoofer does not have a cut-off filter

selection switch but has a cut-off frequency adjusting dial,

turn it to the maximum frequency. If your subwoofer does

not have built-in power amplifier, you can connect a power

amplifier between the unit and the subwoofer.

● The speaker setting is 7.1 channels at the time of

purchase. You can change it manually or by using

automatic speaker setting.

● Short-circuiting the + cable and - cable or contacting

the cable core to the rear panel of the unit may cause

failure. Also do not connect two or more cables to one

speaker terminal or one speaker to several terminals.

When using commercially available banana plugs:

tighten the speaker terminals to the end and then insert

the banana plugs. Do not insert the core of speaker cable

directly into the hole for banana plug of speaker terminal.

(North American models)

Step 2: Setting Up

En-10

z Operation: Use the remote controller of this unit to

operate the menus shown on the TV screen. To display the

guidance, you need to make HDMI connection between

the unit and TV. Select the item with the cursor buttons of

the remote controller and press ENTER to confirm your

selection. To return to the previous screen, press RETURN.

1 Turning the Power On

Connect the power cord to the outlet (). Press z ON/

STANDBY on the main unit or z RECEIVER on the remote

controller to turn the unit on or to standby mode.

● When the unit is turned on, a large instantaneous

current may flow affecting functionality of the computer

and other devices. It is recommended to use a separate

outlet from that for the computer or such other sensitive

devices.

¼ Taiwanese models include removable power cords. Connect the power cord

to AC INLET of the unit and then connect to the outlet. Always disconnect

the outlet side first when disconnecting the power cord.

2 Making Automatic Speaker Setting

The AccuEQ Room Calibration function, our proprietary

technology, measures the test tone coming from each

speaker with the supplied speaker setup microphone,

setting of the number of speakers, volume level, each

speaker's optimum crossover frequencies, and distance

from the primary listening position, and also enables

correction of distortion caused by the acoustic environment

of the room.

● You cannot return to the previous screen during speaker

setup, even if you press RETURN.

1� Place the speaker setup microphone�

Before starting the procedure, refer to the figure and

place the supplied speaker setup microphone at the

measurement position .

Listening area

Measurement position with

microphone

¼ Correct measurement will not be possible if the microphone is held

by hand. Measurement is not possible if headphones are being used.

¼ The subwoofer sound may not be detected since it is extremely

low frequencies. Set the subwoofer volume to around the half of its

maximum volume and make its frequency to the maximum level.

¼ Measurement may be interrupted if there is ambient noise or radio

frequency interference. Close the window and turn off the home

appliance and fluorescent light.

2� Connect the speaker setup microphone to the

SETUP MIC jack of the unit�

SETUP MIC jack

Speaker

setup

microphone

Step 2: Setting Up

En-11

3� Select the settings for the connected speakers, the

type of the height speakers, and other appropriate

settings�

AccuEQ Room Calibration

Select how many speakers you have.

Ne xt

ENTER

Speaker Channels

Subwoofer

Height Speaker

7.1ch

Yes

---

When the screen above is displayed, set the items with

the cursor buttons on the remote controller.

Refer to the on-screen diagram for "Speaker Channels",

which changes each time a different number of channels

is selected. When all the items have been set, press

ENTER on the remote controller. After that, follow the

guidance displayed on the TV screen to operate the unit.

● Refer to the content of an item, which appears on

the lower left of the screen when the cursor is on the

item.

4� The test tones sound from the connected speakers

and automatic speaker setting starts�

Measurement will be made three times or more for each

speaker. It takes several minutes to be completed. Keep

the room as quiet as possible during measurement. If

any of the speakers do not produce the test tone, check

for disconnection.

● During measurement, each speaker outputs the test

tones at a high volume. Be careful of sound leak

that may disturb your neighbors, or be careful not to

frighten young children.

● To cancel measurement on the way, disconnect the

microphone plug.

5� When the measurement is completed, the

measurement result is displayed�

Press

t

/

u

on the remote controller to check the

settings. Press ENTER with "Save" selected. Select

"On" in the next screen and press ENTER on the remote

controller.

● You should normally select "On (All Channels)", and

to disable just the front speakers, you should select

"On (Except Front Left/Right)".

● If there is an error message, follow the on-screen

instruction to remove the error cause.

6� When "Please unplug setup microphone�" is

displayed, disconnect the microphone�

3 HDMI Setup

The unit supports the linked system function such as power

on/off link when connected via HDMI cable with a CEC

(Consumer Electronics Control) compliant TV or player. You

need to change the default setting to use the linked system

function, HDMI Standby Through function and ARC (Audio

Return Channel) function.

HDMI CEC (RIHD)

The following linked operations are possible with connected

equipment when the CEC function is enabled.

●

Turning the TV to standby mode will turn the unit to

standby mode.

●

On the TV side, it is possible to set whether to output

audio from the speakers connected to the unit or from the

TV's speakers.

●

Starting playback of a CEC compliant player/recorder will

automatically switch the unit's input to the HDMI input of

the player/recorder. If the unit is in standby mode, it will

automatically be turned on.

It is also possible to control the connected CEC compliant

equipment with the remote controller of the unit. For details,

see the Advanced Manual.

¼ RIHD is a name for the linked system function of Onkyo's CEC compliant

products.

1� After pressing RECEIVER, press SETUP on the

remote controller�

2� Select "5� Hardware" with the cursor and press

ENTER�

3� Select "HDMI" with the cursor and press ENTER�

4� Select "HDMI CEC (RIHD)" with the cursor and

select "On"�

● When setting is complete, press SETUP to close the

menu screen.

HDMI Standby Through

The function allows transmission from players to the TV

even if the unit is in standby. Setting the HDMI CEC (RIHD)

setting mentioned above to "On" enables this setting

automatically.

● Power consumption in standby mode increases when

the HDMI Standby Through function is enabled.

ARC (Audio Return Channel)

Simple connection to the ARC compatible TV using a single

HDMI cable allows to listen to the TV audio signals from

the speakers connected to the unit. Setting the HDMI CEC

(RIHD) setting mentioned above to "On" enables the "Audio

Return Channel" setting automatically.

Audio output of connected players

To enjoy digital surround sound including Dolby

Digital and DTS, audio output should be set to

"Bitstream output" on the connected Blu-ray Disc

Player or other device.

Depending on the settings on the Blu-ray Disc Player,

there may be cases when Dolby TrueHD, Dolby

Atmos, and DTS-HD Master Audio is not output

according to the format of the source.

In this case, in the Blu-ray Disc Player settings

try setting "BD video supplementary sound" (or

secondary sound) to "Off".

Change the listening mode after changing the setting

to confirm.

Step 3: Playing Back

En-12

1 Basic Operations

z When using the remote controller to operate

the AV receiver: The remote controller of this unit

has the remote mode function for controlling other

devices. You cannot control this unit when the

remote controller is in the remote mode other than

RECEIVER mode (for controlling this unit). Be sure

to press G RECEIVER to select the RECEIVER

mode before starting operation.

1� Turning the power on�

Press 1 z RECEIVER on the remote controller to turn

the power on.

● Switch the input on the TV to that assigned to the

unit. Use the TV's remote controller.

2� Select the input on the unit�

Press the 2 INPUT SELECTOR for the player you want

to listen to. Press TV to listen to the TV's sound. You can

also use the input selector buttons on the main unit.

● Input will automatically be selected if the TV or player

is CEC compliant and connected to the unit with

HDMI cable.

3� Select the desired listening mode�

After pressing G RECEIVER, press the 7 listening

mode buttons to switch the mode so that you can enjoy

different listening modes.

4� Adjust the volume with I VOL�

Part names and functions of the remote

controller

1

3

J

I

K

L

7

F

5

6

8

2

4

9

H

G

1 z RECEIVER button: Turns the unit on or into standby

mode.

2 REMOTE MODE/INPUT SELECTOR buttons: Switch

the input to be played. Furthermore, by registering a

particular remote control code to a button, you can

switch the remote control mode to operate other

equipment by pressing that button.

3 MEMORY button: Registers a radio station.

4 TUN MODE button: Switches the tuning mode.

5 Cursor buttons and ENTER button: Move the cursor

and confirms the selection.

6 SETUP button: Displays the screen for making various

settings for this unit.

7 Listening mode buttons: Allow you to select the

listening mode.

MOVIE/TV button: You can select a listening mode

suitable for movies and TV programs.

MUSIC button: You can select a listening mode suitable

for music.

GAME button: You can select a listening mode suitable

for games.

STEREO button: You can select a listening mode for

stereo and all channel stereo sources.

● For details on the listening modes, see the Advanced

Manual.

8 DIMMER button: Switches the brightness of the display.

9 ZONE A/B button: For use when the unit is connected

with speakers in a separate room and sound is played

there.

F MUSIC OPT button: Turns on/off the MUSIC

OPTIMIZER function that improves the quality of the

compressed audio.

G RECEIVER button: Switches the remote controller to

the mode for operating this unit.

H MUTING button: Temporarily mutes audio. Press again

to cancel muting.

I VOLUME buttons: Allow you to adjust the volume. This

button also cancels the muting.

J RETURN button: Returns the display to the previous

state.

K Q button: Displays the Quick Setup menu that allows

you to quickly access the frequently used setting items

including sound quality adjustment.

L DISPLAY button: Switches the information on the

display.

Step 3: Playing Back

En-13

Display

13 52 64

87

1 Lights in the following conditions. "A": Output to ZONE A

/ "B": Output to ZONE B / "HDMI": HDMI signals are

input and HDMI input selector is selected. This lights

faintly when the HDMI Standby Through function is

enabled and the unit is in standby. / "ARC": Audio

signals are input from ARC compatible TV and TV

input selector is selected. / "3D": Input signals are 3D. /

"DIGITAL": Digital signals are input and selected.

2 Stays lit when headphones are connected.

3 Lights according to the type of input digital signals and

the listening mode.

4 Stays lit when Music Optimizer is enabled.

5 Lights in the following conditions. "AUTO": Tuning mode

is auto. / "TUNED": Receiving AM/FM radio. 

flashes while tuning is automatically performed. / "FM

STEREO": Receiving FM stereo. / "RDS" (European,

Australian and Asian models): Receiving RDS

broadcasting.

6 "MUTING": Flashes when muting is on.

7 Lights in the following conditions. "SLEEP": Sleep timer

has been set. This lights faintly when the Power Out

at Standby for STRM BOX function is enabled and the

unit is in standby. / "ASb" (Auto Standby): Auto Standby

is on. / "ch": Channel is being set. / "Hz": Crossover

frequencies are being set. / "m/ft": Speaker distances

are being set. / "dB": Speaker volume is being set.

8 Displays various information of the input signals.

Pressing DISPLAY displays the type of input digital

signals and the listening mode.

2 Bluetooth

You can wirelessly enjoy music files stored in a smartphone

or other Bluetooth-enabled device. The coverage area is 48

feet (15 meters).

● The Bluetooth-enabled device needs to support the

A2DP profile.

● Note that connection is not always guaranteed with all

Bluetooth-enabled devices.

 Pairing

Pairing is necessary when connecting the Bluetooth-

enabled device for the first time. Before starting the

procedure, learn how to enable the Bluetooth setting

function and to connect with other devices on the

Bluetooth-enabled device.

1� Press BLUETOOTH on the remote controller�

The unit begins pairing and "Now Pairing..." is displayed.

2� While "Now Pairing��" is on the display, complete

connection on the Bluetooth-enabled device in the

nearby area within about 1 minute�

If the name of this unit is displayed on the Bluetooth-

enabled device's display, select this unit. Paring will end

after a short time.

● If a password is requested, enter "0000".

● You can pair with another Bluetooth-enabled device

by pressing and holding the BLUETOOTH button

until "Now Pairing..." is on the display. This unit can

store the data of up to 8 paired devices.

 Playing Bluetooth-enabled devices

If the unit is on and the Bluetooth-enabled device is

connected, the input will be automatically switched to

BLUETOOTH. Play music in this state.

For details on using the remote controller for these

operations, see the Advanced Manual.

● If the volume setting on the Bluetooth-enabled device is

low, the sound will not be output from this unit.

● Due to the characteristics of Bluetooth wireless

technology, the sound produced on this unit may slightly

be behind the sound played on the Bluetooth-enabled

device.

● The on-screen displays are not displayed when the

OSD language is set to Chinese. Operate by confirming

the display on the main unit. (European, Australian,

Taiwanese and Asian models)

3 AM/FM Radio

The Basic Manual explains the method using automatic

tuning. For manual tuning, see the Advanced Manual.

1� Press TUNER on the remote controller several times

to select either "AM" or "FM"�

2� Press TUN MODE so that the "AUTO" indicator on

the display lights�

3� Press the



/



cursor buttons�

The automatic tuning to a radio station starts. Searching

stops when one is tuned. When tuned into a radio

station, the "

u

TUNED

t

" indicator on the display lights.

The "FM STEREO" indicator lights if the radio station is

an FM radio station.

● Alternatively you can press



TUNING



on the main

unit.

Actual display varies

depending on the country

TUNED

FM STEREO

AUTO

Registering a radio station: You can register up to 40 of

your favorite AM/FM radio stations.

1. Tune into the AM/FM radio station you want to register.

2. Press MEMORY on the remote controller so that the

preset number on the display flashes.

3. Press CH +/- several times to select a number between

1 and 40 while the preset number is flashing (about 8

seconds).

● Alternatively you can press

t

PRESET

u

on the main

unit.

4. Press MEMORY again to register the station.

When registered, the preset number stops flashing. To

Step 3: Playing Back

En-14

select a preset radio station, press

t

PRESET

u

on the

main unit or CH +/− on the remote controller.

● To delete a preset station, after selecting the preset

station you want to delete, press MEMORY on the

remote controller, and with the preset number flashing

on the display, press CLR on the remote controller.

AM/FM frequency step setting

It may be necessary for you to change the

frequency step to tune the radio in your area.

Change the step with the following procedure. Note

that when this setting is changed, all radio presets

are deleted.

1 After pressing RECEIVER on the remote

controller, press SETUP.

2. Select "5. Hardware" with the cursor and press

ENTER.

3. Select "Tuner" with the cursor and press ENTER.

4. Select "AM / FM Frequency Step" (North

American and Taiwanese models) or "AM

Frequency Step" (European, Australian and

Asian models) with the cursor and select the

frequency step for your area.

(For Taiwanese models only)

The setting is "10 kHz / 0.2 MHz" at the time

of purchase. Please change it to "9 kHz /

0.05 MHz".

4 Multi-zone

You can listen to audio in a room (called ZONE B) other

than ZONE A (the room where this unit is located).

You can play in both ZONE A and ZONE B or just in ZONE

B.

Press ZONE A/B on the remote controller several times

to select the zone�

Either "A" or "B" lights on the display of the main unit to

indicate which zone is currently selected.

● Alternatively you can press ZONE A or ZONE B on the

main unit.

● The volume of ZONE B is the same as the volume set

for ZONE A.

● It is not possible to listen to different sources in ZONE A

and ZONE B.

● The listening mode is fixed to All Ch Stereo when

playing in ZONE B. Furthermore, no sound will be

output from the back speakers and height speakers in

ZONE A.

5 Quick Setup Menu

You can perform common settings on the TV screen while

playing.

1� Press Q on the remote controller�

The Quick Setup menu is displayed on the connected

TV's screen.

Quick Setup

Listening Mode

Audio

Information

MOVIE/TV

MUSIC

GAME

BD/DVD

2� Select the item with the cursors on the remote

controller and then press ENTER�

● To return to the previous screen, press RETURN.

3� Select the setting with the cursors of the remote

controller�

 Listening Mode: Select the listening mode from the

categories of "MOVIE/TV", "MUSIC" and "GAME".

After selecting the Listening Mode, press ENTER button to

confirm.

● It cannot be set when audio is played from the TV's

speakers.

 Audio: You can perform various audio settings including

audio quality and speaker level adjustment.

● You cannot select this item when audio is output from

the TV's speakers.

Bass, Treble: Adjust volume of the front speaker.

● It cannot be set if the listening mode is Direct.

Phase Matching Bass: Suppress phase shift in the

midrange to enhance bass sound. Thus smooth and

powerful bass sound can be obtained.

● It cannot be set if the listening mode is Direct.

Center Level, Subwoofer Level: Adjust the speaker

level while listening to the sound. The adjustment you

made will be reset to the previous status when you turn

the unit to standby mode.

● Changes may not be possible depending on the

speaker settings.

Step 3: Playing Back

En-15

● This setting is not possible during MUTING or when

using headphones.

A/V Sync: If the video is behind the audio, you can

delay the audio to offset the gap. Different settings can

be set for each input selector.

● It cannot be set if the listening mode is Direct.

AccuEQ Room Calibration: Enable or disable the

settings made by automatic speaker setting. To enable

them, you should normally select "On (All Ch)", and to

disable just the front speakers, you should select "On

(ex. L/R)". The setting can be separately set to each

input selector.

● This setting cannot be selected if the automatic

speaker setting has not been performed.

● It cannot be set if headphones are connected or the

listening mode is Direct.

Music Optimizer: Improve the quality of the

compressed audio. Playback sound of lossy

compressed files such as MP3 will be improved. The

setting can be separately set to each input selector.

● The setting is effective in the signals of 48 kHz or

less. The setting is not effective in the bitstream

signals.

● It cannot be set if the listening mode is Direct.

Late Night: Make small sounds to be easily heard. It

is useful when you need to reduce the volume while

watching a movie late night. You can enjoy the effect

only with Dolby Digital, Dolby Digital Plus, and Dolby

TrueHD input sources.

● Turning the unit to standby mode will set the setting

to "Off". In case of Dolby TrueHD, the setting will be

set to "Auto".

● If "Loudness Management" is set to "Off", this

function is not available when playing Dolby Digital

Plus or Dolby TrueHD.

Cinema Filter: Adjust the soundtrack that was

processed to enhance its treble, in order to make it

suitable for home theater.

● This function can be used in the following listening

modes: Dolby Digital, Dolby Digital Plus, Dolby

TrueHD, Multichannel, DSD, DTS, DTS-ES, DTS

Neo:6 Cinema, DTS 96/24, DTS-HD High Resolution

Audio, DTS-HD Master Audio, DTS Express.

Center Spread: Adjust the width of the sound field of

the front channel when playing in the Dolby Surround

listening mode.

To spread the width of the sound field to the left and

right, set to "On". To concentrate sound in the center, set

to "Off".

● Depending on the speaker settings, this becomes

"Off".

 Information:

Audio: Displays the audio input source, format, number

of channels, sampling frequency, listening mode, and

number of output channels.

Video: Displays information such as the video input

source, resolution, color space, color depth, 3D

information, Aspect and output.

Tuner: Displays information such as the band,

frequency, and preset number. This is displayed only

when "TUNER" is selected as the input source.

6 Other useful functions

To adjust the sound quality

It is possible to enhance or moderate the bass and treble

of front speakers. Press TONE on the main unit several

times to select the desired setting from "Bass", "Treble" and

"Phase Matching Bass", and adjust with +/-.

● It cannot be set if the listening mode is Direct.

"Bass": Allows you to enhance or moderate the bass.

"Treble": Allows you to enhance or moderate the treble.

"Phase Matching Bass": Allows you to keep the clear

midrange and effectively enhance the bass.

Checking the Input Format

Press DISPLAY on the remote controller several times to

switch the display of the main unit in order of:

Input source & volume

Listening mode

Signal format

Sampling frequency

Input signal resolution

● If "Dolby D 5.1" is displayed in Signal format, the

Dolby Digital 5.1 ch signals are being input. When

listening to AM/FM radio, the band, frequency and

preset number are displayed.

Playing Audio and Video from Separate Sources

It is possible to play audio and video from different sources.

For example, you can play audio from the CD player and

video from the BD/DVD player. In this case, press BD/

DVD and then CD. Then start playback on the BD/DVD

player and CD player. This function is effective when an

input with audio only has been selected (CD, TUNER or

BLUETOOTH). ()

¼ When BLUETOOTH is selected, press MODE on the remote controller.

En-16

Others

Troubleshooting

Before starting the procedure

Problems may be solved by simply turning the

power on/off or disconnecting/connecting the

power cord, which is easier than working on the

connection, setting and operating procedure. Try

the simple measures on both the unit and the

connected device. If the problem is that the video

or audio is not output or the HDMI linked operation

does not work, disconnecting/connecting the HDMI

cable may solve it. When reconnecting, be careful

not to wind the HDMI cable since if wound the

HDMI cable may not fit well. After reconnecting, turn

off and on the unit and the connected device.

The AV receiver turns off unexpectedly�

● The AV receiver will automatically enter standby mode when

Auto Standby or Sleep Timer is set and launched.

● The protection circuit may have been activated. If this is the

case, when you turn the unit on again, "AMP Diag Mode" will

appear on the main unit’s display. The unit will then enter a

mode that detects abnormal conditions. If no problems are

detected, "AMP Diag Mode" will disappear and the unit will

return to a normal state. If "CHECK SP WIRE" appears on the

display, the speaker cables may be short-circuited. Turn the

unit off, and check to see if the cable core of any of the speaker

cables is in contact with that of another speaker cable or with

the rear panel. After that, turn the unit on again. If "NG" appears,

unplug the power cord immediately and contact your Onkyo

dealer.

There’s no sound, or it’s very quiet�

● A wrong input selector button has been selected. Select a

correct input for the player. Also check that muting is not on.

● Not all listening modes use all speakers.

There’s no picture�

● A wrong input selector button has been selected.

● To display video from the connected player on the TV screen

while the unit is in standby, you need to enable HDMI Standby

Through function.

● When the TV image is blurry or unclear, power cord or

connection cables of the unit may have interfered. In that case,

keep distance between TV antenna cable and cables of the unit.

Video and audio are out of synch�

● Video may be delayed relative to audio depending on the

settings and connections with your TV. Adjust in "Step 3:

Playing Back", "5 Quick Setup Menu", "A/V Sync".

Cannot play digital surround�

● To enjoy digital surround sound including Dolby Digital and

DTS, audio output should be set to "Bitstream output" on the

connected Blu-ray Disc Player or other device.

Cannot output audio such as Dolby Atmos according

to the format of the source�

● If you cannot output audio according to the format of the

source (Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio,

etc.), in the Blu-ray Disc Player settings try setting "BD video

supplementary sound" (or secondary sound) to "Off". Change

the listening mode for each source after changing the setting to

confirm.

HDMI control does not function correctly�

● Set the CEC link function of the unit to on. It is also necessary

to make the HDMI linked system setting on the TV. See the TV's

instruction manual for details.

 Resetting the unit

Resetting the unit to the status at the time of shipment may solve

the problem. If the measures above do not solve the problem, reset

the unit with the following procedure. If you reset the unit status,

your preferences will be reset to the defaults. Note them down

before starting reset.

z How to reset:

1� While holding down CBL/SAT on the main unit (note that

step 2 must be performed with this button pressed down)

2� Press zON/STANDBY on the main unit� ("Clear" appears on

the display and the unit returns to standby�)

● Do not unplug the power cord until "Clear" disappears from

the display.

C lear

1.

While holding

down CBL/SAT,

2.

Press zON/

STANDBY�

z How to reset the remote controller:

1� While holding down RECEIVER on the remote controller,

press Q until the remote indicator stays lit (about 3

seconds)�

2� Within 30 seconds, press RECEIVER again�

Remote indicator

RECEIVER

Q

Others

En-17

Specifications

Amplifier Section

Rated Output Power (North American)

With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 65

watts per channel minimum RMS power, with no more than 0.7% total

harmonic distortion from 250 milliwatts to rated output.

Surround Mode Output Power ()

(6 ohms, 1 kHz THD 0.9%) 115 W per channel

¼ Reference output for each speakers.

Depending on the source and the listening mode settings, there may be

no sound output.

Rated Output Power (Others)

7 ch × 100 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC)

Maximum Effective Output Power

7 ch × 120 W at 6 ohms, 1 kHz, 1 ch driven (JEITA) (Asian)

Dynamic Power ()

¼ IEC60268-Short-term maximum output power

160 W (3 Ω, Front)

125 W (4 Ω, Front)

85 W (8 Ω, Front)

THD+N (Total Harmonic Distortion+Noise)

0.08% (20 Hz - 20 kHz, half power)

Input Sensitivity and Impedance (Unbalance)

200 mV/47 kΩ (LINE, 1 kHz 100 W/8 Ω)

Rated RCA Output Level and Impedance

1 V/470 Ω (SUBWOOFER PRE OUT)

Frequency Response

10 Hz - 100 kHz/+1 dB, –3 dB (Direct mode)

Tone Control Characteristics

±10 dB, 20 Hz (BASS)

±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio

100 dB (LINE, IHF-A)

Speaker Impedance

6 Ω - 16 Ω

Video Section

Signal level

1.0 Vp-p/75 Ω (Component Y)

0.7 Vp-p/75 Ω (Component Pb/Cb, Pr/Cr)

1.0 Vp-p/75 Ω (Composite)

Maximum resolution supported by component video

480i/576i

Tuner Section

FM Tuning Frequency Range

87.5 MHz - 107.9 MHz (North American and Taiwanese)

87.5 MHz - 108.0 MHz, RDS (Others)

AM Tuning Frequency Range

522/530 kHz - 1611/1710 kHz

Preset Channel

40

Bluetooth Section

Communication system

Bluetooth Specification version 2.1 +EDR (Enhanced Data Rate)

Maximum communication range

Line of sight approx. 15 m ()

Frequency band

2.4 GHz band

Modulation method

FHSS (Freq Hopping Spread Spectrum)

Compatible Bluetooth profiles

A2DP 1.3 (Advanced Audio Distribution Profile)

AVRCP 1.5 (Audio Video Remote Control Profile)

Supported Codecs

SBC

Transmission range (A2DP)

20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)

¼ The actual range will vary depending on factors such as obstacles between

devices, magnetic fields around a microwave oven, static electricity,

cordless phone, reception sensitivity, antenna’s performance, operating

system, software application, etc.

General

Power Supply

AC 120 V, 60 Hz (North American and Taiwanese)

AC 220 - 240 V, 50/60 Hz (Others)

Power Consumption

4.3 A (North American and Taiwanese)

420 W (Others)

0.15 W (Stand-by, North American and Taiwanese)

0.3 W (Stand-by, Others)

55 W (No-sound)

Dimensions (W × H × D)

435 mm × 160 mm × 328 mm

17-1/8" × 6-5/16" × 12-15/16"

Weight

7.8 kg (17.2 lbs.) (North American and Taiwanese)

8.0 kg (17.6 lbs.) (Others)

● HDMI

Input

BD/DVD, CBL/SAT, GAME 1, STRM BOX

Output

HDMI OUT (to TV)

Video Resolution

4K 60 Hz (RGB/YCbCr 4:4:4/YCbCr 4:2:2, 24 bit)

Audio Format

Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, Dolby Digital,

DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24,

DTS-ES, DTS, DTS Express, DSD, Multichannel PCM (up to 8ch)

Supported

3D, Audio Return Channel, Deep Color, x.v.Color™, LipSync, CEC, 4K,

Extended Colorimetry (sYCC601, Adobe RGB, Adobe YCC601),

Content Type, 3D Dual View, 21:9 Aspect Ratio Video Format

● Video Inputs

Component

COMPONENT VIDEO (BD/DVD, GAME 2)

Composite

VIDEO (CBL/SAT, VCR), AUX INPUT VIDEO (front)

● Audio Inputs

Digital

OPTICAL (CD, TV)

DIGITAL AUDIO (BD/DVD)

Analog

AUDIO (BD/DVD, CBL/SAT, GAME 2, VCR, CD, TV)

AUX INPUT (front)

● Audio Outputs

Analog

Pre Out (ZONE A SUBWOOFER)

Speaker Outputs

ZONE A (FRONT L/R, CENTER, SURROUND L/R, BACK/HEIGHT L/R),

ZONE B (FRONT L/R)

Phones

PHONES (Front, ø 6.3)

● Others

Setup Mic 1 (Front)

RI REMOTE CONTROL 1

STRM BOX POWER OUT 1 (5 V/1 A)

Specifications and features are subject to change without notice.

Others

En-18

Table of display resolutions

Refer to the following table for information about the image formats and resolutions output by this unit in

response to input signals.

Output

Input

HDMI

4K 1080p/24 1080p 1080i 720p 480p/576p 480i/576i

HDMI

4K ○

1080p/24 ○

1080p ○

1080i ○

720p ○

480p/576p ○

480i/576i ○

Component

1080p

1080i

720p

480p/576p

480i/576i ○

Composite 480i/576i ○

Resolutions supported by HDMI

Input support

Content

protection

technology

Display

resolution

Frame rate Color space Color Depth Remarks

HDMI input

(BD/DVD,

CBL/SAT,

GAME1,

STRM BOX)

HDCP1.4

HDCP2.2

720×480i 60Hz

RGB/YCbCr4:4:4/

YCbCr4:2:2

8/10/12/16bit

With YCbCr4:2:2,

Color Depth

supported is up to

8/10/12bit.

720×576i 50Hz

720×480p 60Hz

720×576p 50Hz

1920×1080i 50/60Hz

1280×720p 24/25/30/50/60Hz

1680×720p 24/25/30/50/60Hz

1920×1080p 24/25/30/50/60Hz

2560×1080p 24/25/30/50/60Hz

4K

(3840×2160p)

24/25/30Hz

RGB/YCbCr4:4:4/

YCbCr4:2:2

8/10/12/16bit

With YCbCr4:2:2,

Color Depth

supported is up to

8/10/12bit.

50/60Hz

RGB/YCbCr4:4:4 8bit

YCbCr4:2:2 8/10/12bit

YCbCr4:2:0 8/10/12/16bit

4K SMPTE

(4096×2160p)

24/25/30Hz

RGB/YCbCr4:4:4/

YCbCr4:2:2

8/10/12/16bit

With YCbCr4:2:2,

Color Depth

supported is up to

8/10/12bit.

50/60Hz

RGB/YCbCr4:4:4 8bit

YCbCr4:2:2 8/10/12bit

YCbCr4:2:0 8/10/12/16bit

Others

En-19

Precautions

For European Models

Declaration of Conformity

We declare, under our sole responsibility, that

this product complies with the standards:

– Safety

– Limits and methods of measurement of

radio disturbance characteristics

– Limits for harmonic current emissions

– Limitation of voltage changes, voltage

fluctuations and flicker

– RoHS Directive, 2011/65/EU

– Hereby, Onkyo Corporation, declares that this TX-SR444 is in compliance

with the essential requirements and other relevant provisions of Directive

1999/5/EC.

– С настоящето, Onkyo Corporation, декларира, че TX-SR444 е в

съответствие със съществените изисквания и другитеприложими

разпоредби на Директива 1999/5/EC.

– Onkyo Corporation tímto prohlašuje, že TX-SR444 splňuje základní

požadavky a všechna příslušná ustanoveni Směrnice 1999/5/ES.

– Undertegnede Onkyo Corporation erklærer herved, at følgende udstyr

TX-SR444 overholder de væsentlige krav og øvrige relevante krav i direktiv

1999/5/EF.

– Hiermit erklärt Onkyo Corporation, dass sich das Gerät TX-SR444 in

Übereinstimmung mit den grundlegenden Anforderungen und den übrigen

einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

– Käesolevaga kinnitab Onkyo Corporation seadme TX-SR444 vastavust

direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele

teistele asjakohastele sätetele.

– ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Ο ΚΑΤΑΣΚΕΥΑΣΤΗΣ Onkyo Corporation ΔΗΛΩΝΕΙ

ΟΤΙ TX-SR444 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ

ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ

– Por la presente, Onkyo Corporation, declara que este TX-SR444 cumple

con los requisitos esenciales y otras exigencias relevantes de la Directiva

1999/5/EC.

– Par la présente, Onkyo Corporation déclare que l’appareil TX-SR444 est

conforme aux exigences essentielles et aux autres dispositions pertinentes

de la directive 1999/5/CE.

– Con la presente Onkyo Corporation dichiara che questo TX-SR444 è

conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite

dalla direttiva 1999/5/CE.

– Ar šo Onkyo Corporation deklarē, ka TX-SR444 atbilst Direktīvas 1999/5/

EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

– Šiuo Onkyo Corporation deklaruoja, kad šis TX-SR444 atitinka esminius

reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.

– A Onkyo Corporation ezzennel kijelenti, hogy a TX-SR444 típusú beren-

dezés teljesíti az alapvető követelményeket és más 1999/5/EK irányelvben

meghatározott vonatkozó rendelkezéseket.

– Hierbij verklaart Onkyo Corporation dat het toestel l TX-SR444 in

overeenstemming is met de essentiële eisen en de andere relevante

bepalingen van richtlijn 1999/5/EG.

– Niniejszym Onkyo Corporation deklaruje że TX-SR444 jest zgodny

z zasadniczymi wymaganiami i innymi właściwymi postanowieniami

Dyrektywy 1999/5/EC.

– Eu, Onkyo Corporation, declaro que o TX-SR444 cumpre os requisitos

essenciais e outras provisões relevantes da Directiva 1999/5/EC.

– Prin prezenta, Onkyo Corporation, declară că aparatul TX-SR444 este

în conformitate cu cerinţele esenţiale şi cu alte prevederi pertinente ale

Directivei 1999/5/CE.

– Onkyo Corporation týmto vyhlasuje, že TX-SR444 a spĺňa základné

požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.

– Onkyo Corporation izjavlja, da je ta TX-SR444 v skladu z bistvenimi

zahtevami in drugimi relevantnimi določili direktive 1999/5/ES.

– Onkyo Corporation vakuuttaa täten että TX-SR444 tyyppinen laite on

direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin

muiden ehtojen mukainen.

– Härmed förklarar Onkyo Corporation att denna TX-SR444 följer de

väsentliga kraven och andra relevanta stadgar i Direktiv 1999/5/EC.

– Hér með lýsir Onkyo Corporation því yfir að varan TX-SR444 er í samræmi

við grunnkröfur og aðrar kröfur sem gerðar eru í tilskipun 1999/5/EC.

– Onkyo Corporation erklærer herved at denne TX-SR444 er i

overensstemmelse med vesentlige krav og andre relevante bestemmelser

i direktiv 1999/5/EC.

– Ovime Onkyo Corporation, potvrđuje da je TX-SR444 u suglasnosti sa

osnovnim zahtjevima i ostalim relevantnim odredbama Direktive 1999/5/

EC.

License and Trademark Information

Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos,

Dolby Surround, and the double-D symbol are trademarks of Dolby

Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from

DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol, the DTS-HD

logo, and DTS-HD Master Audio are registered trademarks or trademarks of

Reserved.

"CINEMA FILTER" and "CINEMA FILTER (logo)" are trademarks of Onkyo

Corporation.

®

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI

Logo are trademarks or registered trademarks of HDMI Licensing LLC in the

United States and other countries.

The Bluetooth

®

word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by Onkyo is under license.

Other trademarks and trade names are those of their respective owners.

Onkyo does not guarantee Bluetooth compatibility between the AV receiver and

all Bluetooth-enabled devices.

For compatibility between the AV receiver and another device with Bluetooth

technology, consult the device’s documentation and dealer. In some countries,

there may be restrictions on using Bluetooth devices. Check with your local

authorities.

Apple, iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and

other countries.

Apple TV is a trademark of Apple Inc., registered in the U.S. and other

countries.

QR Code is a registered trademark of DENSO WAVE INCORPORATED.

"x.v.Color" is a trademark of Sony Corporation.

AccuEQ, Music Optimizer, RIHD and WRAT are trademarks of Onkyo

Corporation.

"RIHD" and "RIHD (logo)" are trademarks of Onkyo Corporation.

"All other trademarks are the property of their respective owners."

* 2 9 4 0 1 9 6 5 A *

F1504-1

SN 29401965A

(C) Cop

Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku,

OSAKA 541-0041, JAPAN

http://www.onkyo.com/

18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.

For Dealer, Service, Order and all other Business Inquiries:

Tel: 201-785-2600 Fax: 201-785-2650

http://www.us.onkyo.com/

For Product Support Team Only:

1-800-229-1687

http://www.us.onkyo.com/

Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY

Tel: +49-8142-4401-0 Fax: +49-8142-4208-213

http://www.eu.onkyo.com/

Unit 1033, 10/F, Star House, No 3, Salisbury Road,

Tsim Sha Tsui Kowloon, Hong Kong.

Tel: 852-2429-3118 Fax: 852-2428-9039

http://www.hk.onkyo.com/

1301, 555 Tower, No.555 West NanJing Road, Jing’an District,

Shanghai, China 200041,

Tel: 86-21-52131366 Fax: 86-21-52130396

http://www.cn.onkyo.com/

The Americas

China

Europe

Asia, Oceania, Middle East, Africa

Please contact an Onkyo distributor referring to Onkyo

SUPPORT site.

http://www.intl.onkyo.com/support/

The above-mentioned information is subject to change

without prior notice.

Visit the Onkyo web site for the latest update.

(Mainland)

(Hong Kong)

Meridien House, Ground floor, 69 - 71 Clarendon Road,

Watford, Hertfordshire, WD17 1DS, United Kingdom

Tel: +44 (0)8712-00-19-96 Fax: +44 (0)8712-00-19-95

Supplied Accessories

Indoor FM antenna --- (1)

AM loop antenna --- (1)

Remote controller (RC-896M) --- (1)

Batteries (AA/R6) --- (2)

Power cord (Taiwanese models) --- (1)

Speaker setup microphone --- (1)

¼ The number in parenthesis indicates the quantity. On packaging, the

letter at the end of the product name indicates the color.

How to use the remote controller

Batteries (AA/R6)

Remote control sensor

Approx.

16 ft. (5 m)

AV Receiver

¼ If you do not use the remote controller for a long time, remove the

batteries to prevent leakage.

¼ Note that keeping consumed batteries inside may cause corrosion

resulting in damage of the remote controller.

Page is loading ...

ONKYO TX-SR444 User manual

ONKYO TX-SR444 User manual

Related papers

Other documents