Thermalright HR-01-K8 Installation guide

Thermalright
Brand
Thermalright
Model
HR-01-K8
Category
Hardware cooling accessories
Type
Installation guide
3D
4B
3B
3
3C
3A
2A
4A
1
2
(Side View)
(Front View)
(To p View
)
1. Apply thermal paste evenly on the CPU DIE (Item 1) and
the bottom of the heat sink.
2. Place the heat sink on top of the CPU, then insert the heat
sink clip with the 6 square-opening (Item 3) between the
heat pipes and make sure the white cylindrical plastic (Item
3C) is inserted inside the center hole (Item 2A) located at
the top of the heat sink base. Slightly adjust the heat sink to
ensure a complete contact with the CPU DIE.
3. With the 6 square-opening heat sink clip, secure one end of
the heat sink clip (Item 3A) onto the lugs (Item 4A) on the
retention bracket, and then do the same for the other side.
(Item 3B/4B)
4. Finally, turn the lock handle (Item 3D) on the heat sink clip
counter-clockwise all the way to the other end to secure
heat sink in place.
5. Make sure there is well managed airflow inside the case.
Please check out Thermalright website for suggested
HR-01 passive-cooling operating conditions.
Parts List
Heat sink body
Heat sink clip
Thermal paste in syringe
120mm fan wire clips
Quantity
1
1
1
2
HR-01
Parts List (For K8 Platform)
K8
(Socket 754/939/940)
installation for
HR-01
HR-01 Installation Guide
HR-01 Installation Guide
(Before)
LEFT
(After)
LEFT
Remarks:
* For Intel P4 socket 478 platform, purchase
of extra parts required.
* For Intel P4 LGA775 platform, a different
HR-01 version is available for sale.
www.thermalright.com
  • Page 1 1

Thermalright HR-01-K8 Installation guide

Thermalright
Brand
Thermalright
Model
HR-01-K8
Category
Hardware cooling accessories
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents