2. ensto
  3. ECO10BTW-J
ECO10BTW-J

ensto ECO10BTW-J User manual

  • Hello! I've reviewed the Quick Guide for the ENSTO ECO10BTW-J floor heating thermostat. I understand its features, including the power switch, LED indicators, temperature adjustment, Bluetooth connectivity, and RCD test functionality. I'm ready to answer your questions about the device.
  • What does the red LED indicator on LED indicator B mean?
    What does a blue flashing LED on LED indicator C mean?
    What should I do if the blue and red LED indicator flashes alternately?
    How do I turn on the power?
    How do I test the Residual Current Device (RCD)?
Floor heating thermostat
Quick Guide
ECO10BTW-J
Switch
LED indicator B
Note!
LED indicator C
C
B
A D
E
F
Bluetooth button is under the adjustment knob (E)
Adjustment knob
Extreme position on the right: power is on
Extreme position on the left: power is o
Turn clockwise: the temperature rises
Turn counter-clockwise: the temperature drops
Press the button: the current should go o, the slide switch
A moves to the OFF position and the LED indicators turn o.
Test the RCD once every three months
Use energy saving features:
Ensto Heat control app + Bluetooth connection
Blue and red LED indicator flashes alternately:
faulty floor sensor
Residual Current Device (RCD) test button
Green: the thermostat is on and
the heating is o
Blue flashing: Bluetooth pairing is in progress
Blue flashing fast: resetting to factory defaults
Ensto Building Systems Finland Oy | Ensio Miettisen katu 2 | P.O.Box 77 | 06101 Porvoo, Finland | tel. +358 204 76 21 | [email protected]
Blue static: temperature change is activated
Red: the heating is on
ON
OFF
A
C
D
E
F
ON
OFF
B
Scale 1:1
27.12.2018
MPMR2688 RAL7046
0 I
I∆n 30 mA
10A
T
2
34
5
T
I∆n 30 mA
10A
5
34
2
0 I
3 mm
2 mm
Scale 1:1
27.12.2018
MPMR2688 RAL7046
0 I
I∆n 30 mA
10A
T
2
34
5
T
I∆n 30 mA
10A
5
34
2
0 I
3 mm
2 mm
/