2. Industrial & lab equipment
  3. Electrical equipment & supplies
  4. Electrical supplies
  5. Electrical wallplates
  6. Altelix
  7. NHPW-AV1

Altelix NHPW-AV1 Installation guide

  • Hello! I've reviewed the NHPW-AV1 Install Guide. This guide details how to install the NHPW-AV1 Wall Mountable Universal Mounting System, including adjusting its brackets and securing equipment. I'm ready to answer your questions regarding its features or installation process.
  • How many wall anchors are provided for drywall applications?
    How many screws are used to secure the device to the equipment plate?
    How many mounting feet does the aluminum equipment mounting plate include?
The aluminum equipment mounting plate includes four (4) stainless steeling
mounting feet so that the plate can be directly attached to a metal
bulkhead or to a wall using the anchors provided.
NHPW-AV1 Install GuidePage-1
IS0182 Rev A 05/05/21
Page-4
IS0182 Rev A 05/05/21
Altelix LLC USA: 866-660-WIFI (9434) International: +1 561-660-9434 sales@altelix.com www.altelix.com
Copyright (C) 2017 AltelixLLC. All rights reserved. Altelixand the Altelixlogo are Trademarks and/or Registered Trademarks of AltelixLLC.
Specifications are subject to change without notice. See www.altelix.com for most current information
The Altelix NHPW-AV1 Wall Mountable Universal Mounting System consists of
three adjustable brackets used for securing the equipment to the
aluminum equipment mounting plate. The brackets can be adjusted for
width, length and height.
Width and Height Adjustable Brackets
Length Adjustable
Mounting Bracket
Install Brackets
Got Questions?
We are here to help.
Contact us at:
sales@altelix.com
USA & Canada Customers: 866-660-9434
International Customers: +1 561-660-9434
Height Adjustment
Brackets
Height
Adjustment
Screws
4. Mount the equipment plate in the required location. For drywall
applications, (4) wall anchors are provided in the kit.
5. To secure the device to the equipment plate, move the two height
adjustment brackets into place and secure with the (2) screws on
bracket. Ensure height adjustment screws are tight.
Equipment
Mounting Plate
NHPW-AV1 Install Guide
Mounting Feet (4)
Installation Note: The steps 4 and 5 may be reversed depending on the size
and weight of the equipment being installed.
Page-3Page-2
The NHPW-AV1 includes the following
components:
(2) Width and Height Adjustment Brackets
(1) Length Adjustment Bracket
(7) Bracket Mounting Screws
(4) Mounting Feet and Hardware
1. To determine the location of the (3) equipment mounting brackets,
position the device to be mounted onto the equipment mounting plate.
Position it within the mounting hole locations for the brackets as
indicated below. Be sure to orientate your equipment so that any
connections or ports are easily accessible.
Equipment Mounting Plate
Holes for Width Adjustment Brackets
Holes for Length Adjustment Bracket
2. Once the location of the (3) equipment mounting brackets are
determined, secure each to the equipment mounting plate using the
supplied screws.
3. Attach the (4) mounting feet to the plate using
the hardware provided.
NHPW-AV1 Install GuideNHPW-AV1 Install Guide
IS0182 Rev A 05/05/21IS0182 Rev A 05/05/21
Height
Width
13.75” (349.2mm)
8.37” (212.7mm)
Adjustability Range
4.25” (107.9mm)
Width Min. Width Max. Height Min. Height Max.
3.0 in. (76.2mm) 11.5” (292.1mm) 0.5 in. (12.7mm) 3.5 in. (88.9mm)
The above illustration and chart shows the minimum and maximum
width and height of devices that can be mounted to the NHPW-AV1.
Mounting Feet (4)
/