2. Forever
  3. Multi
Multi

Forever Multi Operating instructions

  • Hello! I have read the instructions for FOREVER Multi-Trans Select transfer paper. This document provides detailed settings and steps for optimal use with paper, card and wood. It covers printer configurations, transfer parameters, and application techniques. I'm ready to answer any specific questions you might have about the instructions or the transfer process.
  • What paper setting should I use for printing?
    What image mode should I select?
    What temperature should I use to transfer on wood?
    What pressure should I use for transfer?
PRINTER SETTINGS:
• Paper Settings: Heavy Paper or similar
• Printer Settings: Multi-Purpose Tray
• Image Mode: Mirrored
• Image Preparation: B&W Printers: 100% Black
CMYK Printers: 400% Black
(C: 100% + M: 100% + Y: 100% + K: 100% = 400% Black)
WHITE TONER Printers: 300% Black
(C: 100% + M: 100% + Y: 100% = 300% Black)
TRANSFER SETTINGS:
TRANSFER APPLICATION: PAPER/CARD
• Place your transfer paper onto the substrate on which you want to press.
• Cover everything with a sheet of Matt Finish Economy.
(If the surface is uneven, use a thin silicone pad with 1mm thickness).
• Close the press using the settings above.
• After the pressing process, place your substrate to one side and allow it to cool down.
• When the substrate has completely cooled down, carefully remove the transfer paper.
TRANSFER APPLICATION: WOOD/ROUGH SURFACES
• Place your transfer paper onto the substrate on which you want to press.
• Cover everything with a sheet of Matt Finish Economy.
• Cover with a 1mm silicone pad. This prevents the edges of the transfer paper from transferring to the substrate.
• Close the press using the settings above.
• After the pressing process, place your substrate to one side and allow it to cool down.
• When the substrate has completely cooled down, carefully remove the transfer paper.
Transfer Instructions for:
FOREVER Multi-Trans Select
for PAPER AND WOOD
SUBSTRATE PRESSURE TEMPERATURE TIME PEEL
PAPER/CARD 2-3 bar/medium 150°C/300°F 10 seconds cold
WOOD 2-3 bar/medium 130°C/265°F 90 seconds cold
www.amayauk.com | 02392 590 281 | [email protected]
Southern Office: 400-450 Nest Business Park, Martin Road, Havant, Hampshire, PO9 5TL
Midlands Office: Unit 4A-C East Bridgford Business Park, Kneeton Road, East Bridgford, Nottingham, NG13 8PJ
1-PAPER-SYSTEM
For BW, Laser & LED Printers & White Toner Printers
/