LAIA USB Flash Disk Recording Operating instructions

Type
Operating instructions
Copyright © 2021 Laia · www.laiatech.com All rights reserved
Instructions for USB flash disk recording
Note: Before the video recording, make sure the USB flash disk format system is “FAT32”, not “NTFS
Step 1. Open the tool, enter the camera IP, click on the “Connect” button. (Shown as below)
Step2. Click on the “record” button. (Shown as below)
Copyright © 2021 Laia · www.laiatech.com All rights reserved
Step 3. Check the UDISK
Click on Query UDISK, if this step is ok, then click on Mount UDISK, if message is mounted, then
next step:
Step 4. In the “Record option” window, click on the “start record” button to start the
video recording (shown as below pic)
Step 5: for visualizing the recorders, click on refreshand downloadyou want.
  • Page 1 1
  • Page 2 2

LAIA USB Flash Disk Recording Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI