2. Home
  3. Lighting
  4. Strip lights
  5. optonica
  6. 6392

optonica 6392 Operating instructions

  • Hello! I've reviewed the Optonica datasheet for the DMX Fader Console 6392. This compact device offers 6 channels of DMX control, a versatile power supply with either batteries or an external source, and a clear LED display. It's designed for both portable use and permanent setups. I'm ready to assist with any questions you might have about the features or specifications detailed in the document.
  • What type of power supply does the console use?
    How many channels does the console have?
    What is the display range of the LED screen?
    Can I use it for permanent installations?
LVD
6 Channel DMX Sliding Fader Console
SKU: 6392
Features
Page 1
Channels 6
Output signal DMX512
Input voltage 5-12VDC or 3 x AAA
Work current < 10mA
Technical Parameters
Input and Output
Warranty and Protection
3 years
Protection
Warranty
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Ta: -30
O
C ~ +55
O
C
T c:
+65
O
C
Safety and EMC
EMC standard (EMC)
Certification CE,EMC,LVD
EN 61347-1:2015
EN 61347-2-11:2015
Safety standard(LVD)
EN55032:2015,
EN61000-3-2:2014,
EN61000-3-2:2013,
EN55024 :2010/A1:2015
Mechanical Structures and Installations
Battery Installation
6 Sliding Faders / Real DMX Value LED Screen
Reverse DC Polarity
• Ideal Cost Efficient 6 Channel Mini DMX Fader Console
• Easy Usage
• Suitable for permanent installations by using available brackets
• Ideal for Sample Testing and Trouble-Shooting on-site or workshops
• Powered by 3 x AAA Batteries or external 5-12V Power-Supply
• 3 Digit LED Screen 0 –100% or DMX000 –DMX255 (Settings by internal DIP-Switch)
• 6 Channel Mode or 5 Channel & Master Mode (Settings by internal DIP-Switch)
4.5VDC
(AAAx3) Battery
DIN Rail Mounting Size:
30 mm
97.00 mm
70.00 mm
42.00 mm
87.00 mm
83.00 mm
70.00 mm
51.50 mm
40.00 mm
Digital display
1-6CH Sliding Fader
XLR5 female
DMX signal output
Din-rail brackets
DC5-12V Power input
DMX signal output DIP switch for function select
and battery power switch
Page 2
Note:
1. The two DMX decoder first address need be set as 1 and 4, each decode 3 channel DMX data.
2. The 1-2bit DIP switch is used to to set 0-255 or 0-100 display, 6 channel or 5+1 channel output.
The 3th DIP switch is used to switch batter y power input.
The factor y setting is 0-255 display and 6 channel output.
3. DIP switch setting:
Wiring Diagram
Power Supply
12-24VDC
Constant Voltage
AC100-240V
M M
+
Single color LED strip
+
Single color LED strip
+
Single color LED strip
DMX signal
DMX signal
CH1 CH2 CH3 CH4 CH5 CH6
+
Single color LED strip
+
Single color LED strip
+
Single color LED strip
0-255 display
6 channel output
0-100 display
5+1 channel output
0-100 display
6 channel output
0-255 display
5+1 channel output
For 5+1 channel output, the DMX dimmer only output 5 channel DMX data,
the sixth pushrod is used to adjust the overall brightness of 1-5 channel.
1 2
ON
1 2
ON
1 2
ON
1 2
ON
6 Ch an ne l DM X Fa de r Co ns o le
Power Supply
5-12VDC
Constant Voltage
AC100-240V
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144,
Ground Floor; Phone: +359 2 988 45 72;
/