2. Crystorama
  3. COL-101-BK

Crystorama COL-101-BK User manual

  • Hello! I'm your chat assistant. I've reviewed the assembly instructions for the CRYSTORAMA COL-101-BK light fixture. This document provides details on how to install the fixture, which can be mounted upwards or downwards and is damp rated. It also specifies the bulb requirements and cautions. I'm ready to answer your questions about the installation process or any other details mentioned in the document.
  • What type of bulb is required?
    What is the recommended wattage for the bulb?
    Is this fixture suitable for damp locations?
ASSEMBLY INSTRUCTION MODEL #COL-101-BK
Electrical Danger Turn Power Off
WARNING:
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
You will need 1 -Medium Base Bulb
60 Watts recommended 60Watts Max.
USE LED BULBS FOR EXTENDED USE
How to Install
1. Install the mounting plate onto the outlet box using
two outlet box screws.
2. Attach the backplate over the mounting plate and
secure with the screws.
3. Place the glass shade over the socket and secure with
socket ring.
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65warnings.ca.gov
The fixture is Damp rated.
13"
5.5"
DETAILED ILLUSTRATION
5"
7.5"
4"
Glass Shade
6.5"
10 1/4"
2 3/4"
Side View
The fixture can be mounted either upwards or downwards.
PART NUMBER MODEL #COL-101-BK
Part Number
Part Numbers
A. (2)-Wire Connector
B. (1)-Mounting plate
D. (1)-Backplate (Ø5.5")
-XSN101BKBK5.5IN
C. (2)-Screw
G. (1)-Socket
E. (1)-Socket Ring
F. (1)-Glass Shade;W5",H7.5"
-XSN101SHA
A
B
C
D
Outlet Box
E
F
G
/