FROST GUARD GFG4R13 Frostguard Fabric 22-1 or 2 x 30 Inch Insulated Backflow Blanket

FROST-GUARD FROST GUARD GFG4R13 Frostguard Fabric 22-1 or 2 x 30 Inch Insulated Backflow Blanket, GFG4R13 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the FROST-GUARD FROST GUARD GFG4R13 Frostguard Fabric 22-1 or 2 x 30 Inch Insulated Backflow Blanket Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FG-UN-8
54" x 108"
65" x 125"
FG-UN FrostGuards have two velcro slots for OS&Y gate valve stems
FG-UN-4 47" x 92"
FG-UN-6
FG-3.3
FG-4
FG-5
Lay Flat Dimensions
H x L
22½" x 22"
Model
FG-1
FG-2
FG-3
42½" x 74"
22½" x 30"
22½" x 40"
27½" x 28"
27½" x 46"
Never any need to install unsightly
homemade burlap insulation wrap again.
Rugged construction and great UV
protection means you can leave
FrostGuard™ Insulated Blankets on
year round.
800-266-5411
www.GuardShackEnclosures.com
Warranty: BPDI-GuardShack warranties this product for one (1) year from the date of purchase to be free of defects in material
and workmanship. All claims must be made known to BPDI-GuardShack in writing within 30 days of the defect becoming known
to the purchaser. There are no warranties that extend beyond those described herein, either expressed or implied. BPDI-
GuardShack reserves the sole right, at it's own option to repair or replace any defective product, and shall exclude any damage
caused by accident, misuse or abuse of the product. In no case shall BPDI-GuardShack be liable for any incidental or
consequential damages what-so-ever.
Fabrication Specifications:
14 oz. vinyl fabric has the necessary fire retardant to meet NFPA-701 / ASTM E-84. It has been treated with anti-mildew and UV
inhibitors. Edges reinforced with double row of machine stiching. Standard colors are Forest Green & Woodland Tan.
Insulation is ASTM C177 compliant, industrial grade, resilent, crushable, compressed fiberglass, available R-13 or R-30.
Reinforced grommets on bottom seam for installation of padlock.
Any RP relief valve discharge venting is un-impeded, even when bottom seams are padlocked together for best insulation
protection
The inexpensive way to protect your backflow assembly from cold weather
/