EarthQuake RK-C6 v2 Operating instructions

Brand
EarthQuake
Model
RK-C6 v2
Category
Car speakers
Type
Operating instructions

EarthQuake RK-C6 v2: Expedite your home audio installation with this versatile rough-in kit, designed for embedding 6.5-inch in-wall or in-ceiling speakers during construction. Its adjustable aluminum mounting wings and 360-degree swivel ring brackets ensure precise positioning and a secure fit. The anti-rust aluminum wings can be trimmed and fastened with staples, nails, or screws directly into ceiling joists for a reliable setup in minutes. Enjoy hassle-free speaker installation with the RK-C6 v2, compatible with all Earthquake's Turn-N-Lock™ ceiling speaker mechanisms.

EarthQuake RK-C6 v2: Expedite your home audio installation with this versatile rough-in kit, designed for embedding 6.5-inch in-wall or in-ceiling speakers during construction. Its adjustable aluminum mounting wings and 360-degree swivel ring brackets ensure precise positioning and a secure fit. The anti-rust aluminum wings can be trimmed and fastened with staples, nails, or screws directly into ceiling joists for a reliable setup in minutes. Enjoy hassle-free speaker installation with the RK-C6 v2, compatible with all Earthquake's Turn-N-Lock™ ceiling speaker mechanisms.

• Extremely easy installation
• Easy for drywall installers to locate
• Perforated anti-rust aluminum mounting wings
• Compatible with all Earthquake’s Turn-N-Lock™ ceiling
speaker installation mechanisms
Earthquake Sound Corpora�on
2727 McCone Avenue, Hayward, CA 94545 •www.earthquakesound.com •510-732-1000
PACKAGE CONTENTS:
x2 Speaker Mounting Ring Brackets
x4 Anti-Rust Mounting Wings
Make sure that the mounting ring bracket is in the
correct orientation prior to installation.
MOUNTING RING BRACKET ORIENTATION
RK-C8 v2
Ø 9.56ʺ
Ø (243mm)
Ø 11.33ʺ
Ø (288mm)
Assembled Wingspan
32ʺ (813mm)
4.48ʺ
(114mm)
9.84ʺ
(250mm)
4.48ʺ
(114mm)
9.84ʺ
(250mm)
RK-C6 v2
4.51ʺ
(114mm)
9.75ʺ
(248mm)
Assembled Wingspan
30.5ʺ (774.7mm)
Ø 9.8ʺ
Ø (250mm)
Ø 8.26ʺ
Ø (210mm)
4.51ʺ
(114mm)
9.75ʺ
(248mm)
Earthquake Sound's second version rough-in kits offer extreme versatility for the installation of most 6.5 and 8 inch in-wall or
in-ceiling speakers. Each rough-in kit is designed to expedite home audio installation during new construction with guaran-
teed customer satisfaction. Straightforward installation is made possible with the extended aluminum mounting wings and
ring brackets. The ring brackets provides the installer 360 degrees of positing for versatility. The perforated anti-rust aluminum
wings can be trimmed to a desired length and securely fastened with staples, nails, and screws right into ceiling joists providing
a reliable setup within a matter of minutes.
INSTALLATION
1. Select the speaker mounting location and route speaker wire to the mounting location.
2. Attach two metal mesh wings to the plastic speaker mounting ring.
3. Mount the assembled RK-C6/C8 in the desired location across ceiling joists using either screws, nails, or staples so that
the ring bracket and wings are positioned between the drywall and wall framing.
4. The RK-C6/C8 has a lip on the mounting ring bracket. Make sure that all mounting rings are facing downward towards the
oor prior to cutting holes in drywall for your speaker installation. See the assembly illustrations on the back page.
5. After fastening the RK-C6/C8 to ceiling joists, run speaker wires through the cable tie located on the mounting ring bracket.
Your speaker is now ready to be installed into the RK-C6/C8 cutout hole.
6. Be sure to follow the installation instructions included with your architectural speakers.
RK-C6 v2 / RK-C8 v2
ROUGH-IN SPEAKER KITS
  • Page 1 1
  • Page 2 2

EarthQuake RK-C6 v2 Operating instructions

Brand
EarthQuake
Model
RK-C6 v2
Category
Car speakers
Type
Operating instructions

EarthQuake RK-C6 v2: Expedite your home audio installation with this versatile rough-in kit, designed for embedding 6.5-inch in-wall or in-ceiling speakers during construction. Its adjustable aluminum mounting wings and 360-degree swivel ring brackets ensure precise positioning and a secure fit. The anti-rust aluminum wings can be trimmed and fastened with staples, nails, or screws directly into ceiling joists for a reliable setup in minutes. Enjoy hassle-free speaker installation with the RK-C6 v2, compatible with all Earthquake's Turn-N-Lock™ ceiling speaker mechanisms.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents