LNAMP-7G Special Super Low-Noise Amplifier

RF-LINKS LNAMP-7G Special Super Low-Noise Amplifier, RF-LINKS LNAMP-7G Special Super Low-Noise Amplifier Operating instructions

  • Hello, I've reviewed the datasheet for the RF-LINKS LNAMP-7G amplifier. This document provides specifications for a wideband amplifier with a frequency range of 10 MHz to 7.2 GHz and a 23 dB gain. It also details its applications, technical specifications, and physical characteristics. I'm ready to answer your questions about this product.
  • What is the operating frequency range of the amplifier?
    What is the gain of the amplifier?
    What is the maximum input power?
    What type of antenna connector is used?
    What is the DC voltage range for the amplifier?
LNAMP-7G
SPECIAL SUPER AMPLIFIER
FOR 10 -7000 MHz RECEIVERS
This is an excellent small amplifier for 10 MHz- 7.2
GHz receivers (not for transmitters). You can connect
this amplifier to 10 MHz - 7.2 GHz equipment. This
SUPER WIDEBAND amplifier will give you an extra
23 dB gain in 10 MHz- 7.2 GHz band. The output
connector is SMA or N type
Applications:
Analog and digital transmission systems
Laboratory and test equipment
Radar receivers
Technical Specifications
Operating Frequency: 10 MHz- 7000 MHz
DC Voltage: 12 -15 V
Gain 23 dB
Input Power Max. 2 mW
Noise factor: < 5 dB
Maximum range: N/A
Out IP3: typ. +25 dBm @ 1300 MHz
Current consumption: 90 mA
Antenna Connector: SMA
Impedance: 50 ohms
Temperature Range: 55 0C
Dimensions: 2.0”x 1.0” x 0.8”
Weight: 65 grams
Band-pass filter: Built-in
Protection: Reverse polarity
Copyright © 2001-2022 RF-LINKS
/