Speakers A-20 Bluetooth User guide

Brand
Speakers
Model
A-20 Bluetooth
Category
Portable speakers
Type
User guide
Use details
Swiching mode
Click previous/ long press to decrease volume
Press next / long press to decrease volume
Pause/ paly
USB charging port
Micro interface
Tfcard socket (caoacity s32g)
Wen charging.the red light is aways on, and the charging room can be closed within 2-3 hours
Power on - Mobile Search Bluetooth-BT-Speaker - click the link
(the sound will tinkle once the connection is successful)
Tum the black button to the left, turn on the machine.
tum the black butlon to the right, turn off the machinc
1.
2.
3.
4.
5.
6.
7.7.
8.
9.
10.
M
Pair a Bluetooth speaker with a Bluetooth phone
1. Make sure the bluetooth speaker is turned on
2. Start the bluetooth function of the mobile phone, find the bluetooth settings, and
then select the bluetooth speaker. The device name of our company's product is BT
SPEAKER. Just click "Pair". After successful patching, you will hear the "Voice"
prompt tone.
Use a Bluetooth speaker
1. Turn on the POWER switch to ON at the bottom of the speaker: the Bluetooth
function is turned on by default.
2. "" health: short press mode conversion (Bluetooth-Card-FM-LINE IN). The default "
Bluetooth mode" when powered on is automatically converted to "TF card mode" when
the TF card is inserted, and automatically converted to "LINE IN" mode when the
audio input line is connected.
3. Volume up and down keys: When the music is in state, long press "" to decrease the
volume, and short press the previous song. ""Long press for volume up, short press
for a song. (Press the two keys at the same time for 3 seconds to switch between
Chinese and English). In FM state, press """" to increase or decrease the frequency
band.
4. " " key: short press to play and pause when playing music, and quick double press
to call back the last call. When prompted to have a call, answer the call and hang up.
5. MIC: speak directly to the phone when the phone comes, used for conversation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment
  • Page 1 1
  • Page 2 2
  • Page 3 3

Speakers A-20 Bluetooth User guide

Brand
Speakers
Model
A-20 Bluetooth
Category
Portable speakers
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents