Hyundai H-TV2905PF User manual

H-TV2506PF



25"(63 cm) COLOUR TELEVISION c  25  (63 )

Instruction manual 

2

TABLE OF CONTENTS

TABLE OF CONTENTS............................................................................................................................................................................................... 2

IMPORTANT SAFEGUARD........................................................................................................................................................................................ 3

COLOR TV FEATURES............................................................................................................................................................................................... 4

1. DESC RIPTION AND PREPA RATION................................................................................................................................................................... 5

2. OPERATION OF REMOTE CONTROL................................................................................................................................................................. 9

3. MENU OVERVIEW.............................................................................................................................................................................................. 12

4. TV OPERATION................................................................................................................................................................................................... 13

5. ADVANCED FUNCTIONS .................................................................................................................................................................................. 21

6. TROUBLESHOOTING......................................................................................................................................................................................... 25

7. SPECIFICATIONS................................................................................................................................................................................................ 27

3

IMPORTANT SAFEGUARD

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

To reduce the risk of electric shock, do not attempt to open the cabinet. There are no parts inside you can service yourself. Refer all servicing

to qualified personnel.

To ensure reliable operation and to protect the unit from overheating, the ventilation slots and openings must not be blocked or covered. Avoid

placing the unit in enclosed spaces such as a bookcase, unless there is adequate ventilation.

Keep this unit away from radiators and other heat sources.

Avoid using the unit near strong magnetic fields.

Do not push objects of any kind into this unit through the cabinet slots as they could touch current carrying parts or short-circuit parts, resulting

in fire, electric shock, or damage to the unit.

Be careful not to spill liquid of any kind on this unit. If liquid is spilled into the unit, consult a qualified service engineer.

Use this unit in the horizontal (flat) position only.

Avoid places the unit to strong vibration.

Do not place heavy objects on the unit. This may damage the cabinet or cause trouble within the unit.

Unplug the unit from the AC outlet when it is not to be used for a long period of time.

When there is lightning, unplug the unit from the AC outlet immediately. Never touch the antenna wire during a lightning storm.

You may experience static discharge when touching the unit. If this happens, and the unit fails to operate, turn off the power and disconnect the

plug from the wall outlet.

When installing the TV receiver, please make sure that a clearance of minimum 10 cm is kept between the top, side, back of the TV and the

nearest wall or furniture enclosure in order to allow proper ventilation for the TV set.

CLEANING THE UNIT

When the cabinet has become dirty or stained, dip a piece of gauze or soft cloth into a dilute solution of neutral cleanser and wipe clean. Never

use thinner or benzene since they will damage the surface of the cabinet.

When the television screen become dirty, wipe it gently with a piece of soft, lint-free cloth. Do not scratch the surface of the screen.

NOTE ON CONDENSATION

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or under high humidity.

Be sure any condensation has evaporated completely before power on the unit.

4

COLOR TV FEATURES

Color systems - PAL, SECAM, NTSC3.58 &NTSC4.43

Sound systems - DK,BG

Sound Effect - B.E, Treble, Bass, Balance, S.E

Preset Programs - 100

Preset Method - Auto Search, Manual Store, Fine Tune

Tuning Method - Voltage Synthesized

Frequency Range - Hyper Band Tuner

Voltage Range - 180-240V, ~50Hz

Display - ENGLISH, RUSSIAN

Functions select - Pop up menu

Remote Control - Full Function Infra-red Remote Controller

AV I/O - 1 RCA-type AV Input

- 1 S-video Input

- 1 SCART AV Input/output

Useful functions - Sleep Timer (10-120min.)

- Auto Off (after 15 min with no signal)

- Blue Background selection (while no signal)

- 3 Default, 1 User Picture Settings

- Channel Adjustment

- Channel Skip

- AV Stereo

- Surround Sound

- On/Off Timer

- Game

- Notebook

- Calendar

- Biological Clock

- Favorite Channel Setting

- Program Prearrange

- AT Function

- Power & Energy Saving

5

1. DESCRIPTION AND PREPARATION

1.1 INSTALLATION OF ANTENNA

Connect the 75 OHM coaxial cable from the antenna to the antenna jack on the rear panel, as shown above.

NOTE:

For better reception, especially in outlying area or where ghost or interference happens, an external roof-mounted antenna is recommended.

For UHF TV reception, use the specified UHF antenna. Consult the local sale dealer.

When using 300 OHM flat cable, a 300 OHM - 75 OHM adapter should be adopted for a proper connection to the antenna jack.

1.2 POWER CONNECTION

Plug the AC cord into an AC outlet.

NOTE:

This unit should be operated from a household 180-240V, ~50Hz.

When you disconnect the power supply cord, pull it out by the plug. Never pull the cord itself.

6

1.3 EXTERNALCONNECTION

NOTE:

The S-video input and video input 1 are sharing the same

channel, therefore cannot based simultaneously.

The AUDIO/VIDEO input terminals on the side panel (if provided) and rear terminals can be connected to

VCR AV, LD player, VCD player or the satellite receiver/decoder output terminals.

The AUDIO/VIDEO output can be connected to other TV monitor or VCR for video monitoring or

Recording.

To switch between Video 1, Video 2 and TV mode by pressing TV/AV button on front panel or on remote

control handset.

7

1.4 FRONT PANEL

1. POWER BUTTON

To turn ON/OFF the TV set.

2. REMOTE SENSOR

To receive the infra-red signals from remote handset.

3. PROGRAM() BUTTONS

Select program number cyclically. To turn on the TV when it is in standby

mode. To select item in sub-menu.

4. VOLUME/PICTURE CONTROL () BUTTONS

To decrease / increase the sound volume and picture settings level.

Channel searching upward/downward in MANUAL STORE and FINETUNE

menu.

5. MENU/AUTO SEARCH BUTTON

To display the main menu.

Press and hold the MENU button for over 3 seconds, it will perform AUTO

SEARCH function.

6. TV/AV BUTTON

To switch between TV program and AV input. To turn on the TV when it is in

standby mode.

8

1.5 REAR TERMINAL & SIDE AV

1. 75 OHMANTENNA INPUT

2. SCART AV INPUT/OUTPUT

3. AV 1 INPUT

4. S-VIDEO INPUT

9

2 OPERATION OF REMOTE CONTROL

2.1 DESCRIPTION OF REMOTE CONTROL KEYS

INTRODUCTION OF KEY FUNCTION

This TV features with a full-function remote control handset. For a more compact remote unit design, some of the keys are multiple with more than

one function. The following text describes the function of keys on remote control unit. Functions related to notebook operated are marked with a

symbol*.

1. STANDBY BUTTON

When the main power is on, to turn the TV set on or off.

2. MUTE BUTTON

To temporarily turn off the sound and to restore it by pressing it again

3. TV/AV BUTTON

To switch between TV program and AV input sources.

4. COLOR SYSTEM BUTTON

To select color system without going into submenu.

5. DISPLAY BUTTON

To display the current program number and function status.

Press the button once again to display the current time on the screen.

6. CALENDAR BUTTON

To enter or exit the perpetual calendar directly.

7. FAVORITE BUTTON

To browse the preset favorite channels. This button will not function if you have not set any

favorite program.

8. OK BUTTON

Within the on-screen menu, press to enter some special function such as game, notebook,

calendar and etc.

9. SLEEP BUTTON

Set the sleep timer from 120 to 10 minutes by pressing the SLEEP button repeatedly. To

display the remaining time, press SLEEP button once. To cancel the sleep timer, press the

SLEEP button until OFF appears.

10. GAME BUTTON

To enter or exit the game directly.

11. NOTEBOOK BUTTON

To activate the notebook function.

10

12. (0-9) DIGIT KEYS

To select program number directly. To select 0-9 digits, A-Z(or a-z) letters, common marks and punctuation marks when writing data or information to

be stored in notebook.

13. PICTURE/ DELETE BUTTON

Cyclically select the default setting level of picture. Within the on-screen menu of FAV.CH, press to delete the undesired channel NO.

In notebook mode, to delete the word or symbols previously stored.

14. PROGRAM UP/DOWN BUTTON

To select the next higher or lower program number. To select the item in submenu.

15. RECALL BUTTON

Press to return to the previously viewed channel.

16. VOLUME UP/DOWN BUTTON

To decrease or increase the sound volume and picture setting level. In MANUAL TUNE and FINE TUNE menu, search channel upward or downward.

17. MENU BUTTON

Press to display the main menu. Also goes back to the previous screen menu or exits the menu from screen.

To insert or overwrite a letter, digit or symbol when you edit the information previously stored in notebook.

18. SOUND SYSTEM BUTTON

To directly select sound system without going into the submenu.

19. SURROUND BUTTON

Cyclically select the surround sound effect among SIMULATED, SURROUND1, SURROUND2 AND SURROUND OFF.

20. B.E BUTTON

To turn Bass Enhancement function on or off.

21. CAPS BUTTON

To select the input form before data or information writing between capital and small letter.

22. S.EFFECT BUTTON

Cyclically select the sound effect among NATURAL, NEWS, SPACIAL, PERSONAL.

23. AT BUTTON

Press two times to turn off the display and enjoy music.

2.2 INSTALLATION OF BATTERIES

1. Open the battery compartment cover.

2. Install two size AAA batteries in correct direction.

3. Close the battery cover.

NOTE:

11

The lifetime of the batteries may last up to one year, depending on how often the remote control is used. For the best performance, the

batteries should be replaced on a yearly basis, or when remote operation becomes erratic.

Be sure to place the batteries in the correct direction.

Do not mix old and new batteries, or different types.

Old batteries may leak chemical and damage the remote control. Always remove batteries as soon as they become weak.

2.3 EFFECTIVELY USING THE REMOTE CONTROL

Point the remote toward the infra-red remote sensor on the main unit.

NOTE:

If direct sunlight, incandescent light, or any other strong light sources hit the remote control sensor, the remote control may not operate

properly.

If there is an obstacle between the main unit and the remote control, the remote control signal may not be received.

12

3. MENU OVERVIEW

MAIN MENU SUB-MENU SUB-MENU ENTRY

CONT 50

BRIGHT 50

COLOR 50

PICTURE TINT ± 00

SHARP 50

PIC.M DYNAMIC/PERSONAL/MILD/STANDARD

B.E ON/OFF

B.E 00

SOUND BASS ± 00

TREBLE ± 00

BALANCE ± 00

S.E NATURAL/NEWS/SPACIAL/PERSONAL

B.B ON/OFF

COLOR AUTO/443PAL/SECAM/443NTSC/358NTSC

SOUND BG/DK

LANGUAGE ENGLISH / RUSSIAN

SETTING AUTO SLEEP ON

PRESENT 30

STORE TO 34

SURE OK

CH ADJUST

FEATURE FAV.CH FAV. CH1 1

FAV. CH2 2

CALENDAR FAV.  3

FAV. CH4 -

GAME FAV. CH5 -

FAV. CH6 -

BIOLOGICAL CLOCK

13

MAIN MENU SUB-MENU SUB-MENU ENTRY

CLOCK 0:13

OFF TIMER OFF/ONCE/DAILY

0:00

TIMER ON TIMER OFF/ONCE/DAILY

0:00

POSITION 0

POSITION 30

BAND VHFL/VHFH/UHF

PRESET MANUAL UP/DOWN

SKIP ON/OFF

FINE UP/DOWN

AUTO MEMORY

4. TV OPERATION

4.1 BASIC OPERATION

4.1.1 POWER ON

Press POWER button on the main unit to turn on/off the TV set.

If the standby indicator lights up, TV is in standby mode.

To turn on the TV from STANDBY mode, press STANDBY button on the remote control or the PROGRAM UP /DOWN, TV/AV button on

the front panel of the main unit.

4.1.2 POWER OFF

Press POWER button on the main unit to turn off the TV set.

Or press STANDBY button on the remote control to switch the TV to standby mode and the STANDBY indicator will light up.

4.1.3 SELECT MAIN MENU

By pressing the MENU button, the main menu bar will appear on the top screen, and PICTURE menu will be highlighted

with yellow color, which means the pull down menu PICTURE is selected and its corresponding menu entries will be

displayed underneath it.

14

Then press VOLUME UP/DOWN button on the set or remote control, you can move the yellow cursor right or left for

selecting other pull-down menus in the main menu bar.

4.1.4 SELECT MENU ENTRIES

After selecting function menu, press PROGRAM UP/DOWN button to move cursor up/down to select the menu entries

(e.g. The BRIGHT of picture menu is selected if it is highlighted with red color).

4.1.5 ADJUST OPTION

Press VOLUME UP/DOWN button to adjust the data or status. E.g., The BRIGHT is adjusted to 65% as shown.

The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the

menu from the screen.

4.1.6 DISPLAY

Press DISPLAY button on remote control to display the current status of the TV set, such as the current channel No. (or

AV input), the color & sound system.

Press DISPLAY button again, current time will displayed on the top screen if you set correct time in menu entry CLOCK

of TIMER.

4.1.7 MUTE

Press MUTE button on remote control to temporarily turn off the sound and the word MUTE as shown will appear on the

screen. Press the Mute button once again to restore the sound. Besides, press VOLUME UP button also can restore the

normal sound output.

4.2 SOUND ADJUSTMENTS

4.2.1 BASS ENHANCEMENT

Activate SOUND menu.

Press PROGRAM UP/DOWN button to select B.E OFF (or ON).

Press VOLUME UP/DOWN to turn B.E on or off.

Press PROGRAM UP/DOWN button to select B.E 00.

Press VOLUME UP to adjust B.E 00 to your desired level, e.g. 12, at the same time B.E will change to ON automatically

if B.E is in OFF mode.

NOTE: You can press B.E button on the remote controller directly to turn B.E function on or off.

15

4.2.2 BASS, TREBLE, BALANCE

Activate SOUND menu.

Press PROGRAM UP/DOWN button to select BASS.

Press VOLUME UP/DOWN to adjust for your favorable sound, e.g., adjust BASS to +30.

The same adjusting procedure is applicable to treble and balance.

BASS: Decrease the low frequency (bass) by adjusting toward -50, increase the low frequency (bass) by adjusting toward +50.

TREBLE: Decrease the high frequency (treble) by adjusting toward -50,increase the high frequency (treble) by adjusting toward

+50.

BALANCE: Adjust the sound source position from left speaker to center to right speaker as balance is adjusted from L(-50) to

R(+50).

4.2.3 SOUND EFFECT

Activate SOUND menu.

Press PROGRAM UP/DOWN button to select S.E.

Press VOLUME UP/DOWN to adjust to your desired setting.

NATURAL NEWS SPACIAL PERSONAL

4.2.4 SURROUND SOUND

Press SURROUND button on the remote controller to adjust to your desired setting:

SURROUND OFF SIMULATED SURROUND 1 SURROUND 2

4.3 CHANNEL PRESET

Please preset all the active channels in your area to the TV set before you enjoy with the TV programs.

4.3.1 AUTO SEARCH

All the active channels will be stored automatically from channel No. 1 and upward in order.

Activate PRESET menu.

Press the PROGRAM DOWN button to select AUTO MEMORY.

16

Press the OK button to start the auto searching, and then all available channels will be stored from No.1 and upward in order. Auto-searching

will stop after all the frequency bands are searched, and the program of the first searched, channel 1, will show. If you want to exit auto search,

just pressing the VOLUME DOWN button.

The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the menu from the screen.

4.3.2 MANUAL SEARCH

To preset the TV channel to your desired position number, manual searching should be used.

Activate PRESET menu.

Press the PROGRAM UP/DOWN button to select POSITION, then press the VOLUME UP/DOWN button to select the

program No., e.g. 30.

Press the PROGRAM UP/DOWN button to select BAND, then press the VOLUME UP/DOWN button to select the

frequency band among VHFL/ VHFH/UHF.

Press the PROGRAM UP/DOWN button to select MANUAL, then press the VOLUME UP/DOWN button to start the

channel searching upward or downward from the current position of this channel and current frequency band.

Note:

If the searched channel is not as your desired, you can simply restart the searching upward or downward by pressing the

VOLUME UP/DOWN button.

To stop manual searching, press the VOLUME DOWN button when searching upward, or press VOLUME UP button

when searching downward.

The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the

menu from the screen.

4.3.3 FINE TUNE

Fine tuning function may improve the receiving quality for some weak /unstable Channels by adjusting the channel frequency

manually.

Select your desired TV channel by digit keys or PROGRAM UP/DOWN buttons.

Activate PRESET menu.

Press the PROGRAM UP/DOWN button to select FINE, then press the VOLUME UP/DOWN button to fine tune the

channel upward or downward until satisfied picture and sound quality are achieved.

The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the

menu from the screen.

NOTE: SIMULATED is used when a mono broadcast is received. SURROUND 1 and SURROUND 2 are used when a stereo broadcast is received.

17

4.3.4 CHANNEL ADJUSTMENT

After the auto or manual search, you may want to rearrange the program numbers in which the channels are stored,

channel adjustment function may be useful to you.

Activate FEATURE menu.

Press the PROGRAM UP/DOWN button to select CH. ADJUST.

Press the OK button to display CH ADJUST menu entries as shown.

Press the PROGRAM UP/ DOWN button to select PRESENT, then press the VOLUME UP/DOWN button to select the

program number you want to change, e.g. 30.

Press the PROGRAM UP/DOWN button to select STORE TO, then press the VOLUME UP/DOWN button to select the

program No. to be replaced, e.g. 22, that means to replace channel 22 by 30.

Then press the PROGRAM UP/DOWN button to select sure and press the OK button to confirm the setting.

If you want to set other channel, follow the above procedure.

The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the

menu from the screen.

4.3.5 PROGRAM SKIP

After the auto search, some fault stations may be memorized because the TV station broadcasts with different frequencies for

your and your neighborhood regions. These additional stations are weak and should be removed from channel memory.

Activate PRESET menu.

Press the PROGRAM UP/ DOWN button to select POSITION, then press the VOLUME UP/DOWN button to select the

channel No. you want to skip, e.g. 18.

Press the PROGRAM UP/DOWN button to select SKIP.

Press the VOLUME UP button to select ON to confirm. If you do not want to skip this channel, or want to find out

skipped channel, just press the VOLUME DOWN button to select OFF.

If you want to skip other channel, follow the above procedure.

The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the

menu from the screen.

4.3.6 FAVORITE CHANNEL SETTING

You can store six favorite channels in memory and preview those channels by FAVORITE button.

Activate FEATURE menu.

Press the PROGRAM UP/DOWN button to select FAV.CH.

Press the OK button to display FAV.CH. menu entries as shown.

18

Press the PROGRAM UP/DOWN button to select FAV. CH3, then press the VOLUME UP/DOWN button to select

program number you want to store into this position, such as 08.

Repeat the above procedure to set other five favorite channels.

You can delete the undesired channel No. with the DELETE button and reset another favorite channel No.

The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the menu from the screen.

4.4 RECEIVING SYSTEM SELECTION

This unit is a multi-system TV. System selection function allows you to select suitable receiving system for the specific broadcasting system in your

area. This unit has the capability of auto-identification on color system. Normally, we strongly recommend you to select the auto-identification mode.

4.4.1 SYSTEM SETTING

EXAMPLE: color system selection

Activate FEATURE menu shown as Fig(1).

Press PROGRAM UP/ DOWN button to select SETTING.

Press OK button to enter SETTING submenu display shown as Fig(2).

Press PROGRAM UP/DOWN button to COLOR item, then press VOLUME UP button to cyclically select the color

system as AUTO, 443PAL, SECAM, 443NTSC and 358NTSC.

Press menu button twice to exit menu operation.

Note:

B.B (BLUE BACKGROUND): when no signal is received, the picture will become blue when B.B is selected ON.

COLOR SYSTEM: the normal selection of color system is AUTO mode in which the TV set will select the system

to match the receiving system. Manual selection can also be made by pressing VOLUME UP/DOWN button while

the indicator is pointing to color option.

SOUND SYSTEM: the selection of sound system is depended on the local broadcasting system.

LANGUAGE: this television can display the menu in two languages: English, Russian.

AUTO SLEEP ON (OFF): If you select AUTO SLEEP to ON mode, it will

turn the TV to standby mode automatically after 2 hours without any operation on the TV set.

19

4.5 OPERATION OF WATCHING TELEVISION

4.5.1 SELECTING CHANNELS

Press PROGRAM UP/DOWN button to change the channel ascendingly / descendingly;

Use the digit keys on the remote control directly to select the channel.

4.5.2 PICTURE ADJUSTMENT

Adjust the level of CONTRAST, BRIGHTNESS, COLOR, SHARPNESS, and TINT to get the most favorable picture

Activate the PICTURE menu.

Press PROGRAM UP/DOWN button to select your desired menu entry, e.g. CONT.

Press VOLUME UP/DOWN button to adjust the picture until you are satisfied, and the CONTRAST setting will be automatically stored in the

memory of the TV set. The same adjustment procedure is applicable to brightness, sharpness, color setting.

Note:

CONT: Adjust for black to white ratio of the picture.

BRIGHT: Adjust for picture background level, i.e. the total brightness of picture.

COLOR: The saturation of color, i.e. the stronger or weaker color of picture.

SHARP: Adjust for details level of picture.

TINT: Adjust for color tune only when watching NTSC picture.

4.6 TIMER FUNCTION

Timer function is provided by the microcomputer of TV set. Once it is set, the ON/OFF time and time displaying functions can start functioning. The

TV set will keep the correct time as long as the main power is on, even if the TV has been turned off into standby mode.

4.6.1 CURRENT TIME SETTING

Activate TIMER menu.

Press the PROGRAM UP/DOWN button to select CLOCK.

Press the VOLUME UP/DOWN button to set the current time, e.g. 12:15.

4.6.2 ON TIMER

To turn on the TV everyday on specified time with your desired channel, on timer function provide a convenient way to do it.

Activate TIMER menu.

Press the PROGRAM UP/ DOWN button to select ON TIMER.

20

Press the VOLUME UP/DOWN button to select among OFF, ONCE, DAILY.

If you select DAILY or ONCE, press PROGRAM DOWN button to 0:00,then press the VOLUME UP/DOWN button to set the ON time, e.g.

22:59.

Press PROGRAM DOWN button to select POSITION, then Press VOLUME UP/DOWN button to select your desired channel No., e.g. 11.

NOTES:

OFF: The On Timer is set to off and will not operate.

DAILY: The timer is set to turn on the TV at that time everyday until otherwise adjusted.

ONCE: The timer is set to turn on the TV only one time.

POSITION: This is the channel the TV will display at On time.

4.6.3 OFF TIMER

To turn off the TV set on specified time, off timer function will be useful to you. Activate TIMER menu.

Press PROGRAM UP/DOWN button to the menu entry OFF TIMER.

Press VOLUME UP/DOWN button select among ONCE, DAILY, OFF.

If you select DAILY or ONCE, press PROGRAM DOWN button to 0:00, then press VOLUME UP/DOWN button to set

the OFF time, e.g. 22:50.

Press menu button to exit menu operation.

NOTES:

OFF: The Off Timer is set to off and will not operate.

DAILY: The timer is set to turn off the TV at that time everyday until otherwise adjusted.

ONCE: The timer is set to turn off the TV only one time.

4.7 TV/AV

Press TV/AV button repeatedly to select the TV signal source or AV signal sources.

This TV set has a composite video input, one S-Video input. If your AV equipment has S-VIDEO output, please input through

the S-VIDEO of TV to get the better picture quality.

NOTE:

To prevent cross talk interference, do not simultaneously input AV signals from

two (or above) different AV terminals.

Page is loading ...

Hyundai H-TV2905PF User manual

This manual is also suitable for

Hyundai H-TV2905PF User manual

Related papers

Other documents