EFI 6723127030 Datasheet

Category
Transparancy films
Type
Datasheet
EFI Production Dot Film XF
160 g/m²
140 µ
/ %
/ %
/
15 - 30 °C (40 - 60% RH)
This universal clear film with a very short drying time provides a basis for films / separations
without any chemicals. It produces very sharp plots and possesses a good dot gain control. A
Dmax. of 3.2 can be achieved in combination with Ultra Chrome inks, even higher densities with
dye based inks.
Description:
Coated clear Film
Very sharp plots
Extremely good density with dye-based inks, good with pigmented inks (up to 3.2)
For dye-based and pigmented inks
Very even surface
Application:
Layoutfilm
Dot gain control
Films for offset and screen printing
Important: Before using our print media, please verify that it is suitable for use with your printer. We shall not assume liability for non-performance of the print media
resulting from changes beyond our control in printing inks or printers. Specifications are subject to change without notice. This product data sheet is intended to be
used as a guideline only. Storing conditions: Please keep product in the supplied boxes for best possible protection. Product must be stored in a cool and dry environ-
ment, exposure to sun light is to be avoided.
Proof, Photo & Production media
PRODUCT DATASHEET
Technical data:
Weight
Thickness
Opacity
Gloss [Tappi 75°]
L*a*b* Paper white
Storage
Size
Sheet Roll Core Roll Core
DIN A4 (210 x 297 mm)
DIN A3 (297 x 420 mm)
DIN A3+ (330 x 483 mm)
DIN A2 (420 x 594 mm)
42,0 cm x 15,0 m (16,5‘‘) 2‘
43,2 cm x 30,5 m (17‘‘) 3‘‘*)
45,7 cm x 30,5 m (18‘‘) 2‘
61,0 cm x 30,5 m (24‘‘) 2‘
91,4 cm x 30,5 m (36‘‘) 2‘
106,7 cm x 30,5 m (42‘‘) 2‘
111,8 cm x 30,5 m (44‘‘) 2‘
127,0 cm x 30,5 m (50‘‘) 2‘
137,0 cm x 30,5 m (54‘) 2‘
152,4 cm x 30,5 m (60‘‘) 2‘
*) supplied with each two adapters 3“ to 2“ core
  • Page 1 1

EFI 6723127030 Datasheet

Category
Transparancy films
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI