PGS Introduction
"Value Series" : Best VALUE gaming cases with the
highest C/P Ratio (Cost to Performance ratio).
"Professional Series – Red label" : Super tower or Super
mid-tower cases with elegant, clean line designs.
"Aluminum – Silver label" : Unique “Full aluminum” cases
targeting at power users, professionals and gamers.
"Ultimate Gaming Series – Black label" : Ultimate gaming
cases targeting at the extreme gamers. This Series offers
gamers with most functions, expandability and Extreme
cooling.
"Compact – Blue Label" : Small form factor case series
including cube cases, mini-ITX and Mini-Tower
(Micro-ATX).
Design Concept
Aerocool is proud to announce our first compact case
(Model : Qs-200) under the PGS-Q series (Compact
series – Blue Label).
Qs-200 is one of the best “Mini-Tower” case in the
market today if not the BEST Mini-tower case. This
compact case is not only elegantly designed and
solidly constructed; it also provides high versatility,
expandability, transportability, protection and
performance.
The Qs-200 is designed with “User-Friendly” concept
in mind and it also gives gamers high versatility and
protection for their Hard Drives. Its “Screw-less”
chassis, pre-installed cable management clips
and removable HDD bracket made this chassis
an easy install. The chassis can support
2 x 3 1/2” HDDs or 3 x 2 1/2” HDDs.
These Hard Drives are also well protected from shock
with the “anti-vibration” rubbers.
The Qs-200 case also delivers optimal air flow and
supports Longer High-End VGA cards up to 340mm.
It is the only Mini-tower case in the market which
can support 5 x 12cm fans (2 x12cm fans in front,
1 x 12cm fan in the rear and 2 x 12cm fan on the
side panel). Its “Mesh” front panel also helps to
maximize air-intake.
Gallery
Front Back
Side
Photos are for exterior
reference only. Not all fans
are inclusive.
Please see specification
page.
Features
- High performance "Mini -Tower" for gamers and
enthusiast
- Solidly constructed chassis - 0.6mm SECC Japanese
Steel
- High-end Graphic card Support - Supports
longer high-end VGA cards up to 340mm
- High versatility - Supports 2 x 3 1/2" HDDs or
3 x 2 1/2" HDDs
- HDD Protection - Includes anti-vibration rubber to
protect your HDDs from shock.
- Ease of Installation - The combination of
Screw-less 5 1/4” bays, 3 1/2” bay and PCI Slot PLUS
a Removable HDD plate make this chassis an easy
install.
- Easy Access front I/O ports - 3 x USBs,
Audio/Mic and E-Sata ports
- Smart Cable Management - “cable management
clips” are pre-installed inside the chassis to minimize
your cable mess and improve the system airflow
- Dust Protection - Includes front "Dust Filter" to prevent
dust entering your computer
Specifications
Spec
Cooling System
Case Type
Material
Motherboards
Chassis Dimensions
Drive Bays
Expansion Slots
Max length space available for PCI slots
I / O Ports
Fan
Rated voltage
Starting voltage
Power consumption
Rated current
Speed
Air Flow (CFM)
Air pressure
Noise (dBA)
Bearing
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Mini Tower
SECC 0.6mm
Mini - ITX / Micro ATX
367(H) x 185(W) x 395(D)
2 x 5.25" (External) / 1 x 3.5" (External) / 2x3.5” HDDs or 3x2.5” HDDs
4 Slots
340 mm
3 x USB2.0 / 1 x E-SATA / Mic & headphone (AC97 & HD audio)
120 x 120 x 25mm
12V
≤ 9V(Power ON/OFF)
2.64W
0.22A
1500 RPM +- 10%
58.35 CFM (Max)
2.1mm H2O
26.67 dB-A
Sleeve
120 x 120 x 25mm
12V
≤ 9V(Power ON/OFF)
2.64W
0.22A
1500 RPM +- 10%
58.35 CFM (Max)
2.1mm H2O
26.67 dB-A
Sleeve
Front Rear
Air Flow
Superb Airflow - install up to
5 x 12cm fans !!!
1. Front - 2 x 12cm fan (1 x 12cm Blue LED fan included)
2. Back - 1 x 12cm fan (1 x 12cm Blue LED fan included)
3. Side - 2 x 12cm fan (optional)
Inside-1
Sufficient depth for hi-end
VGA cards up to 340mm
Tool-Free for PCI slots
Cable clips to reduce
cable mess
Can install up to 2x12cm
fans
Tool-free for 5.25” bays
HDD installation option 3:
2.5” x 2 or 2.5” x 3
HDD installation option 2:
3.5” x 1 and 2.5” x 1
HDD installation option 1:
3.5” x 2
Removable HDD rack can be
laid flat for ease of installation
Design Concept
/
