American Standard 209AA137.020 Specification

Type
Specification
K2-235
© 2018 AS America Inc.
spec_209AA137 YorkvilleVorMax RHel 12/18
Yorkville
VorMax
®
Right Height
®
Elongated Toilet
VITREOUS CHINA
BARRIER FREE
Yorkville
VorMax
®
Right Height
®
Elongated Toilet
209A A137
Floor mount, back outlet gravity ush toilet conguration
VorMax ushing technology cleans two times better than
conventional toilets**
• Combination bowl and tank, less seat
• Right Height elongated siphon action bowl
• High efficiency toilet (HET) 1.28 gpf/4.8 Lpf
• Meets EPA WaterSense
®
criteria
• EverClean
®
Antimicrobial Surface included
CleanCurve
rim eliminates rim area where dirt and build-up hide
Creates 50% less noise than pressure-assist technology toilets
Consistently ushes and removes paper seat covers unlike many
pressure-assist toilets which tend to rip and leave behind paper
Meets all applicable drain line carry requirements and
performs just as well as all pressure-assist HETs
• 16-1/2" (419 mm) rim height for accessible applications
• 2-1/16" (52 mm) trapway
• Dual injection ush valves
• Chrome trip lever included
Four color-matched bolt caps
• 10 year warranty (1 year commercial)
Best 1,000g MaP Flush Score
209A A138 Same as above except trip lever on right hand side
3359A101 Right Height
®
Elongated Bowl
4385A137 HET Tank
Nominal Dimensions:
30-3/16" x 18" x 32-13/16"
(767 x 458 x 833mm)
Fixture only, seat and supply sold separately
Alternative Tank Conguration Available:
4385A138 Tank complete with trip lever
located on right side
4385A187 Left hand trip lever tank with tank cover
lock device.
Compliance Certications -
Meets or Exceeds the Following Specications:
ASME A112.19.2/CSA B45.1 for Vitreous
China Fixtures
• US EPA WaterSense
®
Specication for HETs
To Be Specied:
Color: White
Seat: #5055A65C Elongated Slow Close solid plastic
seat and cover or #5901100 Elongated heavy-duty
open front seat less cover
Supply with stop:
MEETS THE AMERICANS WITH DISABILITIES A
CT GUIDELINES
AND ICC ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USABLE BUILDING FACILITIES-CHECK LOCAL CODES.
Source: Test Report No. 109-141486-002, comparing VorMax
ag
ainst conventional under-the-rim-water-dispersal toilets
from major retailers.
MaP testing performed by IAPMO R&T Lab. MaP
report conducted by Gauley Associates Ltd. and Koeller
and Company.
**
MaP testing performed by IAPMO R&T Lab. MaP report conducted by
Gauley Associates Ltd. and Koeller and Company.
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
209AA138 Combo with Seat 5055A65C
209AA137 Combo with Seat 5901100
ENVIROMENTAL
PRODUCT
DECLARATION
EVERCLEAN
®
EPA
WATERSENSE
®
CERTIFIED
WATER
EFFICIENT
K2-236
© 2018 AS America Inc.
spec_209AA137 YorkvilleVorMax RHel 12/18
Yorkville
VorMax
®
Right Height
®
Elongated Toilet
VITREOUS CHINA
C/L OF
WASTE
OUTLET
C/L
C/L OF 1/2" DIA HOLES 168mm (6-5/8") CENTERS
3" (76mm)
30-3/16"
(767mm)
8-7/8"
(225mm)
18-1/2"
(470mm)
13-3/8"
(340mm)
13-7/16"
(342mm)
17"
(432mm)
4" (102mm)
3/4" (19mm)
FINISHED WALL
C/L OF SEAT POST
HOLES 5-1/2"
(140mm CENTERS)
SUPPLY AS
REQ’D
11-3/16"
(284mm)
14"
(355mm)
32-13/16"
(833mm)
18"
(458mm)
3"
(76mm)
3"
(76mm)
4"
(102mm)
*6"
(152mm)
*9"
(229mm)
NOTES:
WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE-FELT (WAX RING NOT RECOMMENDED).
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS SUPPLIED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
BARRIER FREE
  • Page 1 1
  • Page 2 2

American Standard 209AA137.020 Specification

Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI