Page is loading ...
Aluminum
Elbows
Fully Adjustable to 90°
17.03 DEtps-A
Deflecto’s policy is one of continual product improvement in
design and manufacturing whereever possible, therefore all
specifications and designs are subject to change without
notice and without incurring obligations.
DRYER
4
in
diameter
RECOMMENDED DUCT BY DRYER
MANUFACTURERS FOR DRYER VENTING
• Fully adjustable aluminum elbow
from 0° to 90°
• Light gauge most commonly used in
dryer or bathroom venting
• Crimped at one end
For aluminum, adjustable elbows
Material
• Aluminum
• Thickness - 0.014" (0.35mm)
Manufactured
• 4 sections, each section machined
together for full range adjustability,
crimped at one end
DE904C is IRC compliant (0.016" aluminum)
A
B
C
Crimped end
DEFLECTO/USA
P.O. Box 50057
Indianapolis, IN 46250
317.849.9555
www.deflecto.com
©2017 DEFLECTO LLC
DEFLECTO/Canada Ltd.
221 Bunting Road
St. Catharines, ON, L2M 3Y2
905.641.8872
www.advp-deflecto.com
MODEL NO. DIMENSIONS
A x B x C
DE903 3" x 2/" x 6"
DE904 4" x 3/" x 6⁄"
DE905 5" x 4/" x 7"
DE906 6" x 5/" x 7⁄"
DE904C 4" x 3/" x 6⁄"
GENERAL INFORMATION
PERFORMANCE DATA
/
