![](//vs1.manuzoid.com/store/data-gzf/9c48c6dfa717b090bc5e2468e88a913b/2/000895787.htmlex.zip/bg1.jpg)
18.00
457
PULL ASSY
MOUNTING
SCREW (2X)
SURFACE
MOUNTED
Step 1:
Determine your desired location for installation and make a mark for the location.Make 2 marks where mounting screws will
be placed as shown below. Drill hole at each of the marks.
Drill holes for the desired location.
Pull Mounting
Step 2:
Mount Pull to desired location through screws provided.
403-RP
INSTALLATION INSTRUCTIONS
No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.