Legrand 3000 Series Medium Steel Prewired Raceway Fittings - DRP20A-V, DR20A-V, DR20A-G Installation guide

Hello! I am an AI chatbot trained to assist you with the Legrand 3000 Series Medium Steel Prewired Raceway Fittings - DRP20A-V, DR20A-V, DR20A-G Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

DRP20A-V, DR20A-V, DR20A-G

INSTALLATION INSTRUCTIONS

WIRING INSTRUCTIONS

Select proper wire size & type for load and application.

CAUTION: CONDUCTORS MUST BE DE-ENERGIZED BEFORE WIRING.

1) Wire preparation:

a. Strip conductors as shown in Fig. 1.

2) Wiring method:

a. Insert or wrap (see Fig. 2) all conductors into identified terminal pockets or screws.

b.Insert all conductors into identified terminal pockets.

1. Green wire to green wire terminal pocket or green screw.

2.White wire to white terminal pocket or white screw on 125V & 277V units.

3. Black wire to brass (gold) terminal pocket or brass screw.

Tighten terminal screws to 14 in. lb.

Fig. 1

3/8"

BRASS TERMINALS

NEUTRAL

125V

250V

WHITE TERMINALS

GREEN

TERMINAL

Do not break off

connecting link

Break off connecting link

with screw driver

Fig. 2