Crown 180MA Quick start guide

Category
Soundbar speakers
Type
Quick start guide
Commercial Audio
MUSIC AND PAGING FOR RETAIL, OFFICE, HOSPITALITY AND INDUSTRY.
HARMAN PRO
Commercial Sound
Ready, Set, ENJOY!
Delivering professional-quality sound to your club, store or restaurant
can be as easy as one-two-three with Commercial Audio products
from the Harman Pro Group: Crown Audio, dbx Professional Products
and JBL Professional. Harman Pro’s Commercial Sound offers scala-
ble system solutions for all application sizes, performance require-
ments and budgets. With a combined experience of almost 150 years
in professional audio installations including airports, cruise ships and
stadiums, Crown, dbx and JBL provide quick and easy product selec-
tion and setup without sacrificing the quality and reliability that profes-
sionals demand.
MIXER/AMPLIFIERS, PREAMPLIFIER/MIXERS,
and AMPLIFIERS from Crown Audio
Crown’s Commercial Audio Series mixer/amplifiers,
preamp/mixers and amplifiers deliver great Crown
power with the features you need for small to medium
audio applications. For larger, more demanding
installations, Crown offers its Xs Series and CH/CL
Series professional amplifiers.
AUDIO PROCESSORS
from dbx Professional Products
dbx ZonePROTM Digital Zone
Processors were specially
designed to deliver flexible, programmable zone processing
for commercial background music and paging applications.
ZonePRO’s secure yet intuitive program interface provides
quick, step-by-step system setup and optimization.
LOUDSPEAKER SYSTEMS
from JBL Professional
JBL’s Control®Contractor Series loudspeakers and
Soundzone®controllers make it easier than ever to have
premium performance in commercial and business environ-
ments. Soundzone controllers are specifically designed for flexible
control of multiple audio sources, while the Control Contractor ceil-
ing, surface-mount and in-wall speakers offer versatility and ease-of-
installation for premium looks and style as well as premium sound.
INTRODUCTION
SMALL RESTAURANT
70V
4 Ohm
Zone 1
Zone 2
JBL Control 24CT
JBL Control 25AV
8 Ohm
8 Ohm
Crown
1-VCAP
Zone 1
Crown
1-VCAP
Zone 2
Crown 280
MA
AKG D 524 ST-S
Push-to-Talk microphone
with pre-announce chime
AKG D 524 ST-S
Push-to-Talk microphone
Harman Kardon
FL 8385 CD Player
Harman Kardon
DVD-31 Player
HEALTH CLUB
AKG D524 ST-S
Microphone
dbx ZonePro 1260
Crown CH2
Crown CH2
JBL Control 29AV
JBL Control 25AV
JBL Control 28T-60
JBL Control 26CT
JBL Control SB210
Crown CH2
Harman Kardon
FL 8385 CD Players
Satellite Receivers
Zone 1
Zone 2
Zone 3
Zone 4
Headworn
Microphone
dbx ZC-1 and ZC-9
dbx ZC-1 and ZC-9
dbx ZC-1 and ZC-9
dbx ZC-1 and ZC-9
Zone 1
Zone 2
Zone 3
Zone 4
Harman Kardon
DVD-31 Players
ABOUT THIS
APPLICATION:
This Health Club
utilizes a dbx
ZoneProTM 1260
controller, Crown CH
Series amplifiers and
JBL Control®
Contractor surface-
mount and ceiling-
mount speakers. The
configuration provides
routing and processing
for 12 input sources
and, in this case, four
output zones including
a large stereo bi-
amped zone that fea-
tures two JBL Control
29AV 2-way speakers
and a JBL Control
SB210 subwoofer.
ABOUT THIS
APPLICATION:
This small restaurant
features a Crown
Commercial Audio
Series 280MA
mixer/amplifier and
JBL Control®
Contractor surface-
mount and ceiling-
mount speakers. The
configuration provides
routing for input from
four audio sources to
two separate output
zones. Wall-mount vol-
ume controls for each
zone are provided via
Crown’s 1-VCAP con-
trollers.
Commercial Audio Series
Crown’s Commercial Audio Series delivers legendary Crown®quality
to the commercial audio industry. These low-cost units provide all
necessary features in a simple building-block format, making it easy to
upgrade your sound system as a facility expands. For example, you
can add more preamplifier/mixers for more inputs, or add more
power amps (or mixer/amps) to handle
more zones. Designed for maximum
flexibility, all units come outfitted with
the features and options described and
require no additional modules or
accessories for setup. And all models
are covered by Crown’s unmatched,
three-year, no-fault, fully transferrable
warranty that completely protects your
investment and guarantees its specifica-
tions. Easily configured for a range of
uses such as paging, background
music, security, and evacuation instruc-
tions, Crown’s Commercial Audio units are the
smart choice for commercial sound.
Features
Balanced Phoenix-type and RCA mic/line inputs;
touch-proofed screw-terminal speaker outputs.
Any input can be sent to any output.
Independent bass and treble controls for each input.
Built-in four-tone generator.
• Priority muting.
MIXER/AMPLIFIERS, PREAMPLIFIER/MIXERS, AMPLIFIERS
MIXER/AMPLIFIERS
Crown 180MA, 280MA, and 1160MA mixer/amplifiers offer an all-
in-one solution for commercial sound, with a choice of 4 or 8 inputs
and 1 or 2 selectable 4-ohm or constant-voltage (70V and 100V)
outputs.
Model Inputs System Zones Power Output*
4-ohm 70V/100V
180MA 4 single-zone 80W 80W
280MA 8 two-zone 80W 80W
1160MA 4 single-zone 160W 160W
*Maximum average power in watts at 1 kHz with 0.5% THD.
Features
• Balanced Phoenix-
type mic/line inputs; RCA inputs.
Balanced Phoenix-type line outputs.
Built-in four-tone generator.
• Priority muting.
Independent bass and treble controls for each input.
AMPLIFIERS
Robust and reliable, Crown 180A, 280A and 1160A
amplifiers offer selectable 4-ohm or constant-voltage
(70V and 100V) outputs and your choice of 1 or 2
amplifier outputs.
Features
Balanced Phoenix-type line inputs; touchproofed
screw-terminal speaker outputs.
Advanced protection system includes output current
limiting, DC protection, circuit breaker/fuse, and
thermal protection.
PREAMPLIFIER/MIXERS
Crown 14M and 28M preamplifier/mixers offer flexible
routing, allowing each input to be assigned to any output.
This feature can significantly reduce the need for additional
mixers or amplifiers (or both) when your application requires
either more inputs or
outputs.
Model Inputs System Zones Power Output*
4-ohm 70V/100V
180A 1 single-zone 80W 80W
280A 2 two-zone 80W 80W
1160A 1 single-zone 160W 160W
*Maximum average power in watts at 1 kHz with 0.5% THD.
Model Inputs System Zones
14M 4 single-zone
28M 8 two-zone
CH/CL Series
Built for the serious contractor, Crown CH/CL Series amplifiers deliver
the features, flexibility and power required in high-profile commercial
applications.
CH1, CH2, CH4 Amplifiers
CH amps offer both low and high impedance
outputs per channel, with each channel inde-
pendently capable of providing 4/8-ohm, 70V
or 100V operation. A 70-Hz high pass filter on
each channel provides low frequency rolloff
to eliminate step-down transformer saturation
when used in 70V and 100V distributed sys-
tems.
CL1, CL2, CL4 Amplifiers
CL amps offer low-impedance compatibility for
applications where high-power, low-impedance loads
are the primary requirement. The CL Series models
provide 2-, 4-, and 8-ohm options per channel. Rear-panel level con-
trols for secure operation and precision detented level controls allow
for accurate level settings in many fixed installation applications.
Active crossover with signal routing available with optional System
Solution Topology modules (SST-SBSC and ScreenArray SSTs).
Features
Rear panel detented level controls allow for accurate level settings and
secure operation.
“Contractor Correct” barrier strip output connectors allow for quick
and easy connection, regardless of the load.
Accurate, uncolored sound with very low distortion for the best in
music and voice reproduction.
AMPLIFIERS
Model Inputs Outputs Power Output*
2-ohm Dual 4-ohm Dual 8-ohm Dual 70/100V Dual 4-ohm 8-ohm 140V 200V
(per channel) (per channel) (per channel) (per channel) Bridge Bridge Bridge Bridge
CH1 2 2 --- 450W 275W 300W --- 900W 600W 600W
CH2 2 2 --- 660W 400W 600W --- 1,320W 1,200W 1,200W
CH4 2 2 1,400W 1,200W 600W 1,200W --- 2,400W 2,400W ---
CL1 2 2 560W 450W 275W --- 1,100W 900W --- ---
CL2 2 2 900W 750W 450W --- 1,950W 1,320W --- ---
CL4 2 2 1,400W** 1,200W 600W --- 2,800W** 2,400W --- ---
*Maximum average power in watts at 1 kHz with 0.05% THD. **+200V line voltage provides 1,800W (2 ohm stereo) and 3,600W (4 ohm bridge-mono).
Features
Housed in a rugged, all-steel 2U chassis.
Efficient forced-air fan prevents excessive thermal buildup.
XLR-1/4-inch combo and Phoenix-style input connectors, daisy-chain XLR
outputs, touch-proof binding post outputs and Speakon outputs.
Precision detented level controls, power switch, and five LEDs which indi-
cate clip for each channel, power, AC present, temperature and fault
conditions.
Microprocessor-controlled protection system.
• Lightweight design.
Model Inputs Outputs Power Output*
2-ohm Dual** 4-ohm Dual 8-ohm Dual 4-ohm** 8-ohm
(per channel) (per channel) (per channel) Bridge Bridge
Xs500 2 2 550W 500W 400W 1,600W 1,450W
Xs700 2 2 900W 750W 450W 1,900W 1,645W
Xs900 2 2 1,100W 900W 600W 2,500W 2,100W
Xs1200 2 2 1,600W 1,100W 650W 3,000W 2,300W
*Maximum average power in watts at 1 kHz with 0.15% THD. **At 0.5% THD.
Xs Series
The Xs Series of power amplifiers from Crown represents a new era in
affordable, quality switch-mode power amplification. The line consists
of four models in a uniform, rugged 2U chassis, incor-
porating the best of tried-and-true design principles and
innovative features. The series features four 2-channel
models: the Xs500, Xs700, Xs900 and Xs1200. Each
has identical features, except for output power. Xs Series
amplifiers are professional stereo power amplifiers
engineered to meet demanding audio requirements —
reliably and within budget.
DIGITAL AUDIO PROCESSORS
ZoneProTM Family
MULTI-ZONE COMMERCIAL DIGITAL AUDIO PROCESSORS
Designed for multi-zone applications, dbx ZonePro™ processors fea-
ture an impressive array of signal processing tools, highly flexible
input and output configurations, plus a simple yet powerful program
interface that will have your system up and running in no time at all.
ZonePro provides every tool and function necessary to maximize sys-
tem performance, from Gating and Feedback Suppression for control
of paging microphones to system processing such as EQ, Crossovers,
Dynamics, and Delay.
Extremely flexible input options allow any input to be assigned as a
primary or priority override source, and also allow two inputs to be
designated as paging sources. Outputs are also highly configurable,
with combinations including mono and stereo zones, and zones with
subwoofers. Your choice of six inputs/four outputs (640 and 641) or
twelve inputs/six ouputs (1260 and 1261) is available.
Powerful ZonePro Designer software, included with each ZonePro unit,
provides an easy-to-use interface for configuration and control,
including the Configuration Wizard that will speed up your system
setup. The software also features other Wizards for system automa-
tion, and allows programming of the end-user controls like the ZC
wall panels and/or the front panels of the 640 and 1260.
Features:
Programmable Wall Panels
Parametric EQ
Advanced Feedback Suppression
• Compression
• De-Essing
• Gating
• Limiting
Input Highpass Filters
Auto Gain Control
• AutoWarmth®
Crossover and Bandpass Filters
• Delay
• Security Lockout
• Event Scheduler
Model 640/641 1260/1261
Analog Inputs 6 total 12 total
Connectors Euroblock (Line and Mic); RCA (Source);
S/PDIF (1260/1261 only)
Type Electronically balanced/RF filtered
Impedance > 50 kBalanced; > 75kUnbalanced
Max Input Line Level +20dBu Mic/Line; +12 dBu RCA
CMRR > 40dB, typically >55dB @ 1kHz
Mic Pre Gain 30 to 60dB
Mic EIN < 118dB, 22Hz-22kHz, 150
Mic Phantom Power 15V
Analog Outputs 4 6
Connectors Euroblock
Type Electronically balanced/RF filtered
Impedance 120 Balanced; 60 Unbalanced
Max Output Level +20dBu
A/D Performance
Type dbx Type IVTM conversion system
Dynamic Range line > 113dB A-weighted; > 110dB unweighted
Type IV Dynamic Range > 119dB A-weighted, 22kHz BW;
> 117dB unweighted, 22kHz BW
System Performance
Dynamic Range 112dB A-weighted; 109dB unweighted
THD+N 0.003% typical at +4dBu, 1 kHz, 0dB gain
Frequency Response 20Hz-20kHz, +/–0.5dB
Interchannel Crosstalk > 80dB typical
Crosstalk input to output > 80dB
Propogation Delay 0.6 msec
Operating Voltage 100-120 VAC, 100-240VAC
200-240 VAC 50/60 Hz 50/60 Hz
Power Requirements 29 Watts
Physical
Weight 6.8 lbs (3.1 kg); Shipping weight 8.8 lbs (4.0 kg)
Dimensions 1.75 in. H x 5.75 in. D x 19 in. W
Safety Agency Certifications
UL 60065, IEC 60065, EN 55013, E 60065
DIGITAL AUDIO PROCESSORS
ZoneProTM Family
ZONEPRO DESIGNER SOFTWARE FUNCTIONS
INPUT
The input module allows input gain control, and in the first two
inputs, Highpass Filter control is also available for reducing micro-
phone handling noise or other undesirable sonic characteristics.
INPUT EQ
All the ZonePro inputs provide EQ. The first two inputs have a four-
band parametric EQ for microphone tonal control, while the other
inputs have a two-band parametric EQ for tonal shaping of the
source.
INPUT INSERTS
Two DSP inserts are available on the mic/line inputs for microphone
processing. These inserts provide selectable DSP functions including:
Feedback Suppression (AFS™), Notch Filtering, Gating, Compression,
De-Esser, and Automatic Gain Control.
DYNAMICS
To provide system protection, the ZonePro allows selection between
output Compression, Limiting or Automatic Gain Control.
DELAY
The ZonePro offers over 400 mSec of output Delay for signal aligning
of the system or speakers.
OUTPUT
The output module of the ZonePro provides polarity control of the
output signal.
ROUTING
Every output zone has its own individually selectable primary source,
priority override source and paging source. These sources can be
selected and ducking can be setup for both priority override and pag-
ing. Output level control is also found in the Routing section.
AUTOWARMTH®
AutoWarmth®is a psychoacoustic function that maintains full frequen-
cy bandwidth even when the signal level has dropped.
BANDPASS FILTERS
Bandpass Filters can be used as Crossovers for subwoofers, or to
maximize the performance of speakers by limiting the out-of-band
information.
OUTPUT EQ
A six-band parametric EQ is available on all outputs to maximize the
sonic performance of the speakers.
LOUDSPEAKER SYSTEMS
Control®Contractor Series
JBL Control Contractor Series are built from the ground up with exclu-
sive JBL components that benefit from over 60 years of JBL research
and development — the benchmarks for audio performance in all
professional loudspeaker applicaitons. Spanning a complete range of
surface mount, in-ceiling and in-wall models, the variety of solutions
offered by the Control Contractor Series give you complete mastery of
any architectural, aesthetic or system performance requirement. JBL
engineers have made the art and science of loudspeaker specification
and installation easy to manage. Simply select the JBL Control
Contractor loudspeaker appropriate for the architectural, form factor
and sonic requirements. The resulting sound system will always deliver
on its promise of Performance, Reliability and Value.
IN-WALL LOUDSPEAKERS
Delivering top performance with
minimal visual impact, JBL in-wall
loudspeakers feature a high-perform-
ance woofer, aimable tweeter and a
sophisticated crossover network.
CEILING LOUDSPEAKERS
JBL ceiling speakers come with everything required for quick and easy
installation, including integral backcan, front grille, above-ceiling back-
ing and tile bridge support hardware.
IN-WALL LOUDSPEAKERS
Control Control
Model 126W/WT 128W/WT
Components
Woofer 6.5 in. 8 in.
Tweeter 1 in. 1 in.
Frequency
Range 38 Hz - 20 kHz 30 Hz - 20 kHz
Power Capacity (continuous)
Program 100W 120W
Pink Noise 50W 60W
Sensitivity
(1W/1m) 88dB 90dB
Nominal
Impedance 88
70V/100V (C126WT) (C128WT)
Taps 30W, 15W, 7.5W 50W, 25W, 12W
(plus 3.7W at 70V) (plus 6W at 70V)
Dimensions 11 x 8.5 x 4.1 in. 13.1 x 10.1 x 4.3 in.
(H x W x D) (280 x 215 x 105 mm) (334 x 257 x 110 mm)
Features:
High-performance polymer-coated alu-
minum woofer.
Adjustable, pure titanium tweeters can
be aimed for optimum coverage.
Easily mounted into standard wall-stud
construction.
Optional rough-in frames available for
new construction projects.
Features:
Snap-on connector for ultra-fast installation.
Titanium tweeters for superior power handling and
smooth response.
Control 24C Micro models feature low-profile back-
cans to fit into restricted depth ceilings.
70/100V models include pre-installed transformers
inside the speaker assembly.
Control 19CS in-ceiling subwoofer delivers pow-
erful bass response from an amazingly compact
enclosure.
Safety approved: UL1480 agency listed for
use in air handling spaces.
Control 24CT Micro
CEILING LOUDSPEAKERS
Control C24CT Control
Model 24C/CT Micro MicroPlus 24C/CT
Components
Woofer 4.5 in. 4.5 in. 4 in.
Tweeter 0.5 in. 0.5 in. 0.75 in.
Frequency
Range 85 Hz - 25 kHz 80 Hz - 25 kHz 80 Hz - 20 kHz
Power Capacity (continuous)
Program 30W --- 80W
Pink Noise 15W --- 40W
Sensitivity
(1W/1m) 86dB 85dB 86dB
Coverage 150° 150° 130°
Nominal
Impedance 8--- 16
70V/100V
(C24CT Micro) (C24CT)
Taps 8W, 4W, 2W, 1W 25W, 12W 30W, 15W, 7.5W
(plus 0.5W at 70V) (plus 6W at 70V) (plus 3.7W at 70V)
Dimensions 4.2 x 7.7 in. 4.2 x 7.7 in. 7.9 x 7.7 in.
(H x Dia) (106 x 195 mm) (106 x 195 mm) (200 x 195 mm)
Control Control Control
Model 26C/CT 26-DT 19CS/CST
Components
Woofer 6.5 in. 8 in. 8 in.
Tweeter 0.75 in. 0.75 in. ---
Frequency
Range 75 Hz - 20 kHz 70 Hz - 20 kHz 42 Hz - 200 Hz
Power Capacity (continuous)
Program 150W --- 200W
Pink Noise 75W --- 100W
Sensitivity
(1W/1m) 89dB 89dB 89dB
Coverage 110° 90° ---
Nominal
Impedance 16--- 8
70V/100V
(C26CT) (C19CST)
Taps 60W, 30W, 15W 60W, 30W, 15W 75W, 30W, 15W
(plus 7.5W at 70V) (plus 7.5W at 70V) (plus 7.5W at 70V)
Dimensions 8.3 x 9.9 in. Standard 8-in. driver 13.6 x 13.6 in.
(H x Dia) (210 x 252 mm) mounting; 4.8 in. (345 x 345 mm)
(120mm) deep
LOUDSPEAKER SYSTEMS
Control®Contractor Series
SURFACE-MOUNT LOUDSPEAKERS
Anchoring the JBL Control Contractor Series are the most versatile line
of surface-mount models anywhere, offering features and quality you
expect from JBL. High versatility, ease of installation, weather resist-
ance, overload protection, variety of finishes, and JBL premium high
fidelity sound quality position these speakers as the very best in the
field.
Features:
Textured, paintable surfaces.
Pure titanium tweeters/compression drivers.
• SonicGuardTM overload protection guards against
damage from overpowering (non-transformer models only).
Highly weather-resistant. Control 25AV, 29AV, and 30 feature a
protective cover for input connections and highly weather-resistant
grilles. Control 30 also features multi-layer WeatherMax™ grille
backing to protect against driving rain.
Dedicated 70V/100V versions available for use in distributed
speaker systems.
Versatile range of mounting brackets available.
SURFACE-MOUNT LOUDSPEAKERS
Control Control Control
Model 23/23T 25/25T 25AV
Components
Woofer 3.5 in. 5.25 in. 5.25 in.
Tweeter 0.5 in. 0.75 in. 0.75 in.
Frequency
Range 85 Hz - 22 kHz 80 Hz - 16 kHz 70 Hz - 23 kHz
Power Capacity (continuous)
Program 50W 150W 200W
Pink Noise 25W 75W 100W
Sensitivity
(1W/1m) 86dB 88dB 87dB
Coverage 150° 150° 130°
Nominal
Impedance 888
70V/100V
(C23T) (C25T)
Taps 5W (70V) 30W, 15W, 7.5W 60W, 30W, 15W
10W (100V) (plus 3.7W at 70V) (plus 7.5W at 70V)
Dimensions 7.6x5.5x4.4in. 9.3x7.4x5.8in. 9.3x7.4x6.3in.
(H x W x D) (193x140x111mm) (236x188x149mm) (236x186x159mm)
Control Control Control
Model 28/28T-60 29AV 30
Components
Woofer/LF Driver 8 in. 8 in. 10 in.
Midrange --- --- 5 in.
Tweeter/Compr. Driver 1 in. 1 in. 1 in.
Frequency
Range 60 Hz - 16 kHz 40 Hz - 19 kHz 38 Hz - 17 kHz
Power Capacity (continuous)
Program 175W 300W 500W
Pink Noise 87W 150W 250W
Sensitivity
(1W/1m) 92dB 91dB 93dB
Coverage 110° 90° ---
Nominal
Impedance 888
70V/100V
(C28-T60)
Taps 60W, 30W, 15W 110W, 55W, 28W 150W, 75W, 38W
(plus 7.5W at 70V) (plus 14W at 70V) (plus 19W at 70V)
Dimensions 15.0x11.0x8.6in. 20.5x12.0x10.9in. 23.3x14.6x13.5in.
(H x W x D) (380x280x220mm) (520x306x277mm) (593x372x345mm)
= Highly weather-resistant to IP-x5 standard.
SURFACE-MOUNT SUBWOOFERS
Model Control SB-2 Control SB-210
LF Components
Size 10 in. 10 in.
Quantity 1 2
Frequency
Range 38 Hz - 160 Hz 42 Hz - 200 Hz
Power Capacity (continuous)
Program 340W 800W
Pink Noise 170W 400W
Sensitivity
(1W/1m) 94dB 96dB
Nominal
Impedance 8x 2 8
Dimensions 15 x 23 x 13.5 in. 14 x 23.3 x 22.5 in.
(H x W x D) (381 x 584 x 343 mm) (356 x 592 x 597 mm)
= Highly weather-resistant to IP-x5 standard.
SURFACE-MOUNT SUBWOOFERS
JBL’s surface-mount subwoofers include all the features necessary to
create extended-spectrum sound when combined with other Control
Contractor Series models.
Features:
Versatile SB-2 features stereo inputs with high-pass outputs for satellite
speakers.
Highly weather-resistant SB-210 features a protective cover for input con-
nections, thermoset-composite grille and multi-layer WeatherMax™ grille
backing to protect against driving rain.
Range of mounting brackets available.
Optional SB-210 Input Modules:
MTC-210-SAT contains built-in crossover allowing connection
of satellite speakers, either stereo or mono, and selection for
either 4or 8satellite loading. This system matches superbly
with Control 28 and Control 29AV as satellite speakers.
MTC-210T allows sub to be driven from a 70V or 100V distrib-
uted line.
MTC-210T-SAT combines both 70V/100V input and built-in
crossover for 4or 8satellite loudspeakers, resulting in sub-
woofer/satellite modules within a distributed speaker system.
INVISIBALL®MOUNTING SYSTEM
JBL’s exclusive, patented Invisiball®Mounting system (most
models) allows for quick, easy, theft-resistant installation with
the built-in mount secured by a few turns of a standard hex
wrench. Ceiling mount adapters are available for Control
23, 25, 29AV and 30. In addition, Control 29AV, 30 and SB-
210 contain suspension points, and optional U-brackets pro-
vide ultimate versatility of installation.
ANALOG AUDIO PROCESSOR
Control®Contractor Series
SOUNDZONE®CONTROLLERS
JBL’s Soundzone®Business Music Zone Controllers provide the suc-
cessful commercial sound installation with unparalleled control and
fidelity. Soundzone controllers are ideal for businesses, restaurants,
health clubs, retail stores and any environment where quality sound
and ease of use are essential. Z32S provides three input sources with
two output zones. Model Z21S handles two input sources with one
output zone.
Features:
Easy to Use, the user simply selects the music source and volume for
each zone. Other functions are hidden behind a security plate or are
automatic. Controls are intuitive — no special user training is required.
• AutoWarmth®is an exclusive JBL dynamic EQ function that automatically
compensates for the ear’s tendency to hear the bass balance differently
at different volumes. AutoWarmth creates enhanced wide bandwidth
fidelity at all volume levels.
LevelGuard™ keeps the music level optimal despite excessive level
changes from the sources.
Built-in Subwoofer Crossovers make it easy to include a Control
Contractor subwoofer in the sound system at any time.
Extra Advanced Features include adjustable duck-for-page, remote
wallplates for volume and/or source selection, stereo-capable zones, and
switchable highpass filters for satellite speaker outputs. Z32S includes all-
call input, music emergency override mute, variable-time priority hold
and assignable pages between output zones.
PRE-PACKAGED SYSTEM
CCS6000 System combines a Control SB-2 with four Control 23
satellite speakers. The Control SB-2’s built-in crossover with high-
pass L/R satellite outputs is tailored to match Control 23 satellite
speakers. No electronic crossover or additional power amps are
needed. The result is a full spectrum system with a 38 Hz – 22 kHz
frequency response. Mounting brackets for corner, wall or ceiling
suspension are also available.
JBL OPTIONAL MOUNTING BRACKETS
MTC-xxUB*U-Brackets
Z32S Controller
CCS6000
MTC-xxCM*Ceiling
Brackets
MTC-xxH*Horizontal
Array Brackets
MTC-xxV*Vertical Array
Brackets
Three MTC-xxH*as
Cluster Module Bracket
SB-2 Brackets
OPTIONS & ACCESSORIES
Commercial Audio Series
1-VCAP & 4-VCAP WALL MOUNT CONTOLLERS
Crown VCAP panels are wall-mounted panels with potentiometers that
provide remote control for the volume of individual channels in Crown
Commercial Audio Series mixer/amplfiers and amplifiers. Two models
are available: 1-VCAP and 4-VCAP.
1-VVCAP: This is a 1-gang panel with one potentiometer that provides
remote volume control for one individual output channel.
4-VVCAP: This is a 2-gang panel with four potentiometers
that provide remote volume control for four channels.
Features:
1-VCAP provides remote volume control for one amplifier channel.
Fits into a 1-gang electrical box.
4-VCAP provides remote volume control for four amplifier channels.
Fits into a 2-gang electrical box.
ZoneProTM Family
ZC ZONE CONTROLLERS
The Zone Controllers offer extended utility to the ZonePro family.
The nine Zone Controllers use analog DC voltage to provide logic
control ranging from zone source selection, volume and muting, to
program or scene selection and fire safety muting. Wired with read-
ily available and affordable CAT5 cable with universally accepted
RJ-45 connectors at distances up to 1000 ft, the ZC Zone
Controllers bring simple yet elegant solutions to the contractor.
Features:
Programmable Volume Control
Program or Scene Selection
Programmable Contact Closure Interface
Up to 1000 ft. on CAT 5 Cable
Programmable Push-To-Talk Paging
Programmable Source Selection
ZC-1: Programmable remote volume control.
ZC-2: Programmable volume and mute control.
ZC-3: Source selector, page steering control, or a scene selector.
ZC-4: Source selector, page steering control, or a scene selector.
ZC-6: Programmable volume control.
ZC-7: Programmable push-to-talk page assignment controller.
ZC-8: Programmable source selection and volume control.
ZC-9: Provides rotary switch source selection (1260 and 1261).
ZC-BOB: Allows “home run” or parallel wiring.
ZC-FIRE: Dedicated fire safety interface that allows selection of either
system mute or scene selection upon being triggered by either
a relay or control voltage from the fire safety system.
4-VCAP
1-VCAP
dbx OPTIONAL ZC ZONE CONTROLLERS
ZC-1 ZC-2 ZC-3 ZC-4 ZC-6 ZC-7 ZC-8 ZC-9 ZC-BOB ZC-FIRE
APPLICATIONS
SMALL RETAIL STORE
AKG D 524 ST-S
Microphone
Harman Kardon
FL 8385 CD Player
Music Service
Satellite Receiver
JBL-Z32S
Crown Xs 500
JBL ZR-3SV Controls
JBL Control 24CT
JBL Control SB210
JBL Control 25AV
SMALL RESTAURANT
AKG D 524 ST-S
Microphone
Harman Kardon
FL 8385 CD Player
Satellite Receiver
Crown 14
M
Amp IN 1
Amp IN 2
Preamp OUT 1
Crown 280
A
JBL Control 25T
JBL Control 28T-60
Harman Kardon
DVD-31 Player
Zone 1
Zone 1
Zone 2
Zone 2
Crown 1-VCAPs
ABOUT THIS
APPLICATION:
This small retail store
features a JBL
Soundzone Z32S con-
troller, Crown Xs 500
amplifier, and JBL
Control®Contractor
surface-mount and
ceiling-mount speak-
ers. The configuration
provides routing for
input from four audio
sources to a single
output zone utilizing
both ceiling-mount
and surface-mount
speakers. Separate
volume controls for
ceiling speakers and
2-way/subwoofer
speakers is provided
using JBL SR-3SV wall-
mount controllers.
ABOUT THIS
APPLICATION:
This small restaurant
uses an innovative
combination of Crown
Commercial Audio
Series 14M mixer and
280A amplifier with
JBL Control Contractor
surface-mount speak-
ers. The configuration
provides routing for
input from four audio
sources to two sepa-
rate output zones.
Separate volume con-
trols for each zone are
provided using Crown
1-VCAP wall-mount
controllers.
AKG D 542 E
Microphone
Harman Kardon
FL 8385 CD Players
Satellite Receiver
Crown CH1
Crown Xs 900
Control 126W
dbx ZonePro 640
dbx ZC-8 Controllers
Control 24CT
JBL Control SB-210
JBL Control 29AV
MEDIUM RESTAURANT
Zone 1
Zone 2
Zone 3
NIGHTCLUB & RESTAURANT
JBL Control 23T
JBL CCS6000 System
JBL Control SB-2
JBL Control 25T
JBL Control 24CT
JBL Control 26CT
JBL Control 24CT
Zone 1A
Zone 1B
Zone 2B
Zone 3B
Zone 4B
dbx ZC-1 and ZC-3
Zone 1A
dbx ZC-1 and ZC-3
Zone 3B
AKG D 542 E
Microphone
Phone Paging
Mixing Console
DJ Mixer
Crown CH1
Crown CH1
Crown CL1
Crown CH1
Satellite Receiver
dbx ZonePro 640
dbx ZonePro 640
Harman Kardon
FL 8385 CD Players
Karaoke
ABOUT THIS
APPLICATION:
This medium-sized
restaurant features a
dbx ZoneProTM 640
controller, Crown CH1
and Crown Xs 900
amplifiers and JBL
Control®Contractor
surface-mount and
ceiling-mount speak-
ers. The configuration
provides routing and
processing for the four
input sources as well
as output processing
such as EQ, Auto-
Warmth, Limiting and
a Crossover for Zone
3 that features two JBL
Control 29A 2-way
speakers and a JBL
Control SB-210 sub-
woofer. Volume control
for each zone is pro-
vided via dbx ZC-8
wall-mount controllers.
ABOUT THIS
APPLICATION:
This large nightclub/
restaurant combination
features two dbx
ZonePro 640s, Crown
CH1 Series amplifiers,
and JBL Control
Contractor surface
mount and ceiling
speakers. The con-
trollers provide signal
routing, EQ, Limiting
and Crossovers for the
bi-amped JBL speakers
used in the nightclub
system, along with sig-
nal routing and EQ,
and AutoWarmth for
the dining areas.
www.harmanpro.com | www.crownaudio.com | www.dbxpro.com | www.jblpro.com
MUSIC AND PAGING FOR RETAIL, OFFICE, HOSPITALITY AND INDUSTRY.
Crown Audio, Inc.
1718 W. Mishawaka Rd.
Elkhart, IN 46517 USA
Tel: 574-294-8000
dbx Professional Products
8760 South Sandy Pkwy.
Sandy, UT 84070 USA
Tel: 801-568-7660
138260-1 3-05
© 2005 Crown Audio, Inc.
JBL Professional
8500 Balboa Blvd.
Northridge, CA
91329 USA
Tel: 818-894-8850
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Crown 180MA Quick start guide

Category
Soundbar speakers
Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI