KTM 350 EXC-F 2022 Owner's manual

OWNER'S MANUAL 2022

350 EXC-F

350 XCF‑W

350 EXC-F SIX DAYS

Art. no. 3214424en

DEAR KTM CUSTOMER

*3214424en*

3214424en

04/2021

DEAR KTM CUSTOMER

Congratulations on your decision to purchase a KTM motorcycle. You are now the owner of a state-of-the-art,

sporty motorcycle that you will continue to enjoy for a long time if you maintain it properly.

We wish you good and safe riding at all times!

Please enter the serial number of your vehicle below.

Vehicle identification number ( p. 14) Stamp of dealer

Engine number ( p. 15)

Key number (All EU models, All BR models,

350 EXC‑F AR, 350 EXC‑F SIX DAYS ASEAN)

( p. 15)

The Owner's Manual contained the latest information for this model series at the time of publication. However,

minor differences due to further developments in design cannot be ruled out completely.

All specifications contained herein are non-binding. KTM Sportmotorcycle GmbH specifically reserves the right

to modify or delete technical specifications, prices, colors, forms, materials, services, designs, equipment, etc.,

without prior notice and without specifying reasons, to adapt these to local conditions, as well as to stop produc-

tion of a particular model without prior notice. KTM Sportmotorcycle accepts no liability for delivery options, devi-

ations from figures and descriptions, as well as misprints and other errors. The models portrayed partly contain

special equipment that does not belong to the regular scope of supply.

Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission

of the copyright owner.

ISO 9001(12 100 6061)

KTM applies quality assurance processes that lead to the highest possible product quality as

defined in the ISO 9001 international quality management standard.

Issued by: TÜV Management Service

KTM Sportmotorcycle GmbH

Stallhofnerstraße 3

5230 Mattighofen, Austria

This document is valid for the following models:

350 EXC‑F EU (F8203V9)

350 EXC‑F BR (F8240V9)

350 EXC‑F AR (F8242V9)

350 XCF‑W US (F8275V1)

350 EXC‑F SIX DAYS EU (F8203V2)

350 EXC‑F SIX DAYS BR (F8240V2)

350 EXC‑F SIX DAYS CN (F8287V2)

350 EXC‑F SIX DAYS ASEAN (F8288V2)

TABLE OF CONTENTS

2

TABLE OF CONTENTS

1 MEANS OF REPRESENTATION ...................... 6

1.1 Symbols used .................................... 6

1.2 Formats used..................................... 6

2 SAFETY ADVICE............................................ 7

2.1 Use definition – intended use.............. 7

2.2 Misuse.............................................. 7

2.3 Safety advice..................................... 7

2.4 Degrees of risk and symbols ................ 8

2.5 Tampering warning............................. 8

2.6 Safe operation ................................... 8

2.7 Protective clothing ............................. 9

2.8 Work rules......................................... 9

2.9 Environment...................................... 9

2.10 Owner's Manual ............................... 10

3 IMPORTANT NOTES.................................... 11

3.1 Manufacturer warranty, implied

warranty.......................................... 11

3.2 Fuel, auxiliary substances................. 11

3.3 Spare parts, technical accessories ..... 11

3.4 Service ........................................... 11

3.5 Figures ........................................... 11

3.6 Customer service.............................. 11

4 VIEW OF VEHICLE ...................................... 12

4.1 View of vehicle, front left (example) ... 12

4.2 View of vehicle, rear right

(example)........................................ 13

5 SERIAL NUMBERS ..................................... 14

5.1 Vehicle identification number............ 14

5.2 Type label ....................................... 14

5.3 Key number (All EU models, All BR

models, 350 EXC‑F AR, 350 EXC‑F

SIX DAYS ASEAN) ........................... 15

5.4 Engine number ................................ 15

5.5 Fork part number ............................. 15

5.6 Shock absorber article number .......... 15

6 CONTROLS................................................. 16

6.1 Clutch lever..................................... 16

6.2 Hand brake lever.............................. 16

6.3 Throttle grip .................................... 16

6.4 Stop button ..................................... 16

6.5 Horn button (All Six Days models,

All EU/BR/CN models, 350 EXC‑F

AR)................................................. 17

6.6 Light switch (All Six Days models,

All EU/BR/CN models, 350 EXC‑F

AR)................................................. 17

6.7 Light switch (XCF‑W)........................ 17

6.8 Turn signal switch (All Six Days

models, All EU/BR/CN models,

350 EXC‑F AR)................................ 18

6.9 Emergency OFF switch ..................... 18

6.10 Start button..................................... 18

6.11 Combination switch (All Six Days

models, XCF‑W) ............................... 19

6.12 Overview of indicator lamps (All

Six Days models, All EU/BR/CN

models, 350 EXC‑F AR).................... 19

6.13 Overview of indicator lamps

(XCF‑W) .......................................... 19

6.14 Opening the fuel tank filler cap ......... 20

6.15 Closing the fuel tank filler cap........... 20

6.16 Cold start button.............................. 21

6.17 Idle speed adjusting screw................ 21

6.18 Shift lever ....................................... 22

6.19 Foot brake lever ............................... 22

6.20 Side stand....................................... 22

6.21 Steering lock (All EU models, All BR

models, 350 EXC‑F AR, 350 EXC‑F

SIX DAYS ASEAN) ........................... 23

6.22 Locking the steering (All EU models,

All BR models, 350 EXC‑F AR,

350 EXC‑F SIX DAYS ASEAN)........... 23

6.23 Unlocking the steering (All EU

models, All BR models, 350 EXC‑F

AR, 350 EXC‑F SIX DAYS ASEAN) .... 24

7 COMBINATION INSTRUMENT ..................... 25

7.1 Combination instrument overview ...... 25

7.2 Activation and test ........................... 25

7.3 Setting kilometers or miles................ 25

7.4 Setting the combination instrument... 26

7.5 Setting the clock.............................. 27

7.6 Viewing the lap time......................... 27

7.7 Display mode SPEED (speed)............ 28

7.8 Display mode SPEED/H (operating

hours)............................................. 28

7.9 Setup menu .................................... 28

7.10 Setting the unit of measurement ....... 29

7.11 Display mode SPEED/CLK (time) ....... 30

7.12 Setting the clock.............................. 30

7.13 Display mode SPEED/LAP (lap

time) .............................................. 30

7.14 Viewing the lap time......................... 31

7.15 Display mode SPEED/ODO

(odometer) ...................................... 31

7.16 Display mode SPEED/TR1 (trip

master 1) ........................................ 32

7.17 Display mode SPEED/TR2 (trip

master 2) ........................................ 32

7.18 Adjusting TR2 (trip master 2)............ 32

7.19 Display mode SPEED/A1 (average

speed 1) ......................................... 33

7.20 Display mode SPEED/A2 (average

speed 2) ......................................... 33

7.21 Display mode SPEED/S1 (stop

watch 1) ......................................... 34

TABLE OF CONTENTS

3

7.22 Display mode SPEED/S2 (stop

watch 2) ......................................... 34

7.23 Table of functions ............................ 35

7.24 Table of conditions and menu

activation ........................................ 36

8 PREPARING FOR USE................................. 37

8.1 Advice on preparing for first use ........ 37

8.2 Running-in the engine...................... 38

8.3 Starting power of lithium-ion

batteries at low temperatures

(XCF‑W, All EU/CN models,

350 EXC‑F SIX DAYS ASEAN)........... 39

8.4 Preparing the vehicle for difficult

operating conditions......................... 39

8.5 Preparing the vehicle for riding on

dry sand.......................................... 39

8.6 Preparing the vehicle for riding on

wet sand ......................................... 40

8.7 Preparing the vehicle for riding on

wet and muddy circuits .................... 41

8.8 Preparing vehicle for high

temperatures or slow riding............... 41

8.9 Preparing the vehicle for low

temperatures or snow ....................... 41

9 RIDING INSTRUCTIONS.............................. 42

9.1 Checks and maintenance measures

when preparing for use ..................... 42

9.2 Starting the vehicle .......................... 42

9.3 Activating traction control (All

Six Days models, XCF‑W) .................. 43

9.4 Starting off...................................... 44

9.5 Shifting, riding ................................ 44

9.6 Braking........................................... 45

9.7 Stopping, parking............................. 45

9.8 Transporting.................................... 46

9.9 Refueling ........................................ 46

10 SERVICE SCHEDULE .................................. 48

10.1 Additional information...................... 48

10.2 Required work ................................. 48

10.3 Recommended work ......................... 49

11 TUNING THE CHASSIS ............................... 51

11.1 Checking the basic chassis setting

with rider's weight............................ 51

11.2 Compression damping of the shock

absorber.......................................... 51

11.3 Adjusting the low-speed

compression damping of the shock

absorber.......................................... 51

11.4 Adjusting the high-speed

compression damping of the shock

absorber.......................................... 52

11.5 Adjusting the rebound damping of

the shock absorber........................... 53

11.6 Measuring the dimension of the rear

wheel unloaded................................ 53

11.7 Checking the static sag of the shock

absorber.......................................... 54

11.8 Checking the riding sag of the shock

absorber.......................................... 54

11.9 Adjusting the spring preload of the

shock absorber ............................. 55

11.10 Adjusting the riding sag ................ 56

11.11 Checking the basic setting of the

fork ................................................ 56

11.12 Adjusting the compression damping

of the fork ....................................... 57

11.13 Adjusting the rebound damping of

the fork........................................... 57

11.14 Handlebar position........................... 58

11.15 Adjusting the handlebar position .... 59

12 SERVICE WORK ON THE CHASSIS............... 61

12.1 Raising the motorcycle with the lift

stand .............................................. 61

12.2 Removing the motorcycle from the

lift stand ......................................... 61

12.3 Bleeding the fork legs....................... 61

12.4 Cleaning the dust boots of the fork

legs ................................................ 62

12.5 Removing the fork protector .............. 62

12.6 Installing the fork protector............... 63

12.7 Removing the fork legs .................. 63

12.8 Installing the fork legs .................. 64

12.9 Removing the lower triple clamp

(EXC‑F EU, XCF‑W, EXC‑F BR,

350 EXC‑F AR)................................ 65

12.10 Removing the lower triple clamp

(All Six Days models)........................ 65

12.11 Installing the lower triple clamp

(EXC‑F EU, XCF‑W, EXC‑F BR,

350 EXC‑F AR)................................ 66

12.12 Installing the lower triple clamp

(All Six Days models)........................ 68

12.13 Checking the steering head bearing

play ................................................ 70

12.14 Adjusting the steering head bearing

play (EXC‑F EU, XCF‑W,

EXC‑F BR, 350 EXC‑F AR)................ 71

12.15 Adjusting the steering head bearing

play (All Six Days models) ............. 71

12.16 Lubricating the steering head

bearing ........................................ 72

12.17 Removing front fender ...................... 72

12.18 Installing front fender....................... 73

12.19 Removing the shock absorber ........ 74

12.20 Installing the shock absorber ......... 74

12.21 Removing the seat ........................... 75

12.22 Mounting the seat ............................ 75

TABLE OF CONTENTS

4

12.23 Removing the air filter box cover ....... 76

12.24 Installing the air filter box cover ........ 76

12.25 Removing the air filter .................. 77

12.26 Installing the air filter ................... 78

12.27 Cleaning the air filter and air filter

box ............................................. 78

12.28 Preparing air filter box cover for

securing ...................................... 79

12.29 Removing the main silencer .............. 79

12.30 Installing the main silencer............... 79

12.31 Cleaning the spark arrestor

(XCF‑W) .......................................... 80

12.32 Changing the glass fiber yarn filling

of the main silencer ...................... 81

12.33 Removing the fuel tank ................. 82

12.34 Installing the fuel tank .................. 84

12.35 Checking for chain dirt

accumulation................................... 86

12.36 Cleaning the chain ........................... 86

12.37 Checking the chain tension ............... 87

12.38 Adjusting the chain tension............... 87

12.39 Checking the chain, rear sprocket,

engine sprocket, and chain guide ...... 88

12.40 Checking the frame ...................... 91

12.41 Checking the link fork ................... 91

12.42 Checking the throttle cable routing .... 91

12.43 Checking the rubber grip .................. 92

12.44 Adjusting the basic position of the

clutch lever ..................................... 92

12.45 Checking/correcting the fluid level of

the hydraulic clutch ......................... 93

12.46 Changing the hydraulic clutch

fluid ............................................ 94

12.47 Removing the engine guard (All

Six Days models, XCF‑W) .................. 95

12.48 Installing the engine guard (All

Six Days models, XCF‑W) .................. 95

13 BRAKE SYSTEM ......................................... 96

13.1 Checking the free travel of the hand

brake lever ...................................... 96

13.2 Adjusting the free travel of the

handbrake lever (All Six Days

models, All EU/BR/CN models,

350 EXC‑F AR)................................ 96

13.3 Adjusting the basic position of the

hand brake lever (XCF‑W).................. 97

13.4 Checking the brake discs .................. 97

13.5 Checking the front brake fluid level ... 98

13.6 Adding the front brake fluid ........... 98

13.7 Checking the front brake linings ...... 100

13.8 Changing the brake linings of the

front brake ................................. 100

13.9 Checking the free travel of foot

brake lever .................................... 104

13.10 Adjusting the basic position of the

foot brake lever .......................... 105

13.11 Checking the rear brake fluid

level ............................................. 106

13.12 Adding rear brake fluid ............... 106

13.13 Checking the rear brake linings ....... 107

13.14 Changing the rear brake linings .... 108

14 WHEELS, TIRES ....................................... 111

14.1 Removing the front wheel ............ 111

14.2 Installing the front wheel ............ 112

14.3 Removing the rear wheel ............. 112

14.4 Installing the rear wheel .............. 113

14.5 Checking the tire condition ............. 115

14.6 Checking tire pressure .................... 115

14.7 Checking spoke tension .................. 116

15 ELECTRICAL SYSTEM ............................... 117

15.1 Removing the 12-V battery .......... 117

15.2 Installing the 12-V battery ........... 119

15.3 Charging the 12-V battery ........... 120

15.4 Changing main fuse ....................... 123

15.5 Changing the fuses of individual

electrical power consumers ............. 124

15.6 Removing the headlight mask with

the headlight ................................. 126

15.7 Installing the headlight mask with

the headlight ................................. 126

15.8 Changing the headlight bulb ........... 127

15.9 Checking the headlight setting ........ 128

15.10 Adjusting the headlight range.......... 128

15.11 Changing the turn signal bulb (All

Six Days models, All EU/BR/CN

models, 350 EXC‑F AR).................. 129

15.12 Changing the combination

instrument battery.......................... 129

15.13 Diagnostics connector .................... 130

16 COOLING SYSTEM .................................... 131

16.1 Cooling system .............................. 131

16.2 Checking the antifreeze and

coolant level.................................. 131

16.3 Checking the coolant level .............. 132

16.4 Draining the coolant ................... 132

16.5 Refilling coolant ......................... 133

16.6 Changing the coolant...................... 134

17 TUNING THE ENGINE............................... 136

17.1 Checking the play in the throttle

cable ............................................ 136

17.2 Adjusting the play in the throttle

cable ......................................... 136

17.3 Adjusting the characteristic map of

the throttle response ................... 137

17.4 Changing the mapping (All

Six Days models) ........................... 138

TABLE OF CONTENTS

5

17.5 Adjusting the idle speed .............. 139

17.6 Programming the throttle valve

position......................................... 140

17.7 Checking the basic position of the

shift lever...................................... 140

17.8 Adjusting the basic position of the

shift lever .................................. 141

18 SERVICE WORK ON THE ENGINE .............. 142

18.1 Changing the fuel screen ............. 142

18.2 Checking the engine oil level........... 143

18.3 Changing the engine oil and oil

filter, cleaning the oil screen ....... 143

18.4 Adding engine oil........................... 146

19 CLEANING, CARE ..................................... 147

19.1 Cleaning the motorcycle ................. 147

19.2 Checks and maintenance steps for

winter operation............................. 148

20 STORAGE................................................. 149

20.1 Storage ......................................... 149

20.2 Preparing for use after storage......... 150

21 TROUBLESHOOTING ................................ 151

22 BLINK CODE ............................................ 154

23 TECHNICAL DATA..................................... 156

23.1 engine .......................................... 156

23.2 Engine tightening torques ............... 157

23.3 Capacities ..................................... 159

23.3.1 Engine oil ................................. 159

23.3.2 Coolant..................................... 159

23.3.3 Fuel ......................................... 159

23.4 Chassis ......................................... 159

23.5 Electrical system............................ 160

23.6 Tires............................................. 161

23.7 Fork.............................................. 161

23.8 Shock absorber.............................. 162

23.9 Chassis tightening torques .............. 162

24 SUBSTANCES .......................................... 165

25 AUXILIARY SUBSTANCES ......................... 167

26 STANDARDS ............................................ 169

27 INDEX OF SPECIAL TERMS ....................... 170

28 LIST OF ABBREVIATIONS.......................... 171

29 LIST OF SYMBOLS.................................... 172

29.1 Yellow and orange symbols.............. 172

29.2 Green and blue symbols.................. 172

INDEX ............................................................. 173

1 MEANS OF REPRESENTATION

6

1.1 Symbols used

The meaning of specific symbols is described below.

Indicates an expected reaction (e.g. of a work step or a function).

Indicates an unexpected reaction (e.g. of a work step or a function).

All work marked with this symbol requires specialist knowledge and technical understanding.

In the interest of your own safety, have these jobs performed by an authorized KTM workshop!

Your motorcycle will be optimally cared for there by specially trained experts using the auxiliary

tools required.

Indicates a page reference (more information is provided on the specified page).

Indicates information with more details or tips.

Indicates the result of a testing step.

Indicates a voltage measurement.

Indicates a current measurement.

Indicates the end of an activity, including potential rework.

1.2 Formats used

The typographical formats used in this document are explained below.

Proprietary name Indicates a proprietary name.

Name

®

Indicates a protected name.

Brand™ Indicates a brand available on the open market.

Underlined terms Refer to technical details of the vehicle or indicate technical terms, which

are explained in the glossary.

SAFETY ADVICE 2

7

2.1 Use definition – intended use

(All Six Days models, All EU/BR/CN models, 350 EXC‑F AR)

This vehicle has been designed and built to withstand the normal stresses and strains of racing. This vehicle

complies with the currently valid regulations and categories of the top international motorsports organizations.

Info

This vehicle is only authorized for operation on public roads in the homologated (restricted) version.

The derestricted version of this vehicle must only be operated in closed off areas away from public

highway traffic.

This vehicle is designed for use in offroad endurance competition, and not primarily for use in

motocross.

(XCF‑W)

This vehicle has been designed and built to withstand the normal stresses and strains of offroad leisure use.

Info

This vehicle is not approved for use on public roads.

This vehicle complies with the Californian and EPA emission requirements for offroad motorcycles.

This vehicle is not designed for use in racing on closed circuits or for Motocross use.

2.2 Misuse

The vehicle must only be used as intended.

Dangers can arise for people, property and the environment through use not as intended.

Any use of the vehicle beyond the intended and defined use constitutes misuse.

Misuse also includes the use of operating and auxiliary fluids which do not meet the required specification for the

respective use.

2.3 Safety advice

A number of safety instructions need to be followed to operate the product described safely. Therefore read this

instruction and all further instructions included carefully. The safety instructions are highlighted in the text and

are referred to at the relevant passages.

Info

Various information and warning labels are attached in prominent locations on the product described. Do

not remove any information or warning labels. If they are missing, you or others may not recognize dangers

and may therefore be injured.

2 SAFETY ADVICE

8

2.4 Degrees of risk and symbols

Danger

Identifies a danger that will immediately and invariably lead to fatal or serious permanent injury if the

appropriate measures are not taken.

Warning

Identifies a danger that is likely to lead to fatal or serious injury if the appropriate measures are not

taken.

Caution

Identifies a danger that may lead to minor injuries if the appropriate measures are not taken.

Note

Identifies a danger that will lead to considerable machine and material damage if the appropriate measures are

not taken.

Note

Indicates a danger that will lead to environmental damage if the appropriate measures are not taken.

2.5 Tampering warning

Tampering with the noise control system is prohibited. Federal law prohibits the following acts or the causing

thereof:

1 The removal or rendering inoperative by any person other than for purposes of servicing, repair, or replace-

ment, of any device or element of design incorporated into any new vehicle for the purpose of noise control

prior to its sale or delivery to the ultimate purchaser or while it is in use, or

2 the use of the vehicle after such device or element of design has been removed or rendered inoperative by any

person.

Among those acts presumed to constitute tampering are the acts listed below:

1 Removal or puncturing of the main silencers, baffles, manifolds or any other components which conduct

exhaust gases.

2 Removal or puncturing of parts of the intake system.

3 Lack of proper maintenance.

4 Replacing moving parts of the vehicle, or parts of the exhaust system or intake system, with parts other than

those specified by the manufacturer.

(XCF‑W)

An add-on or modified part must be compliant with applicable ARB evaporative emission control standards. A

violation of this requirement is punishable by civil and/or criminal punishment.

2.6 Safe operation

Danger

Danger of accidents A rider who is not fit to ride poses a danger to him or herself and others.

– Do not operate the vehicle if you are not fit to ride due to alcohol, drugs or medication.

– Do not operate the vehicle if you are physically or mentally impaired.

SAFETY ADVICE 2

9

Danger

Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and death.

– Always make sure there is sufficient ventilation when running the engine.

– Use effective exhaust extraction when starting or running the engine in an enclosed space.

Warning

Danger of burns Some vehicle components become very hot when the vehicle is operated.

– Do not touch any parts such as the exhaust system, radiator, engine, shock absorber, or brake system

before the vehicle parts have cooled down.

– Let the vehicle parts cool down before you perform any work on the vehicle.

Only operate the vehicle when it is in perfect technical condition, in accordance with its intended use, and in a

safe and environmentally compatible manner.

An appropriate driver's license is needed to ride the vehicle on public roads.

Have malfunctions that impair safety promptly eliminated by an authorized KTM workshop.

Adhere to the information and warning labels on the vehicle.

2.7 Protective clothing

Warning

Risk of injury Missing or poor protective clothing presents an increased safety risk.

– Wear appropriate protective clothing such as helmet, boots, gloves as well as trousers and a jacket

with protectors on all rides.

– Always wear protective clothing that is in good condition and meets the legal regulations.

In the interest of your own safety, KTM recommends that you only operate the vehicle while wearing protective

clothing.

2.8 Work rules

Unless specified otherwise, the ignition must be turned off during all work (models with ignition lock, models

with remote key) or the engine must be at a standstill (models without ignition lock or remote key).

Special tools are necessary for certain tasks. The tools are not a component of the vehicle, but can be ordered

using the number in parentheses. Example: bearing puller (15112017000)

During assembly, use new parts to replace parts which cannot be reused (e.g. self-locking screws and nuts,

expansion screws, seals, sealing rings, O-rings, pins, and lock washers).

In the case of certain screws, a screw adhesive (e.g. Loctite

®

) is required. Observe the manufacturer's instruc-

tions.

If thread locker (e.g., Precote

®

) has already been applied to a new part, do not apply any additional thread locker.

After disassembly, clean the parts that are to be reused and check them for damage and wear. Change damaged

or worn parts.

After completing a repair or service work, check the operating safety of the vehicle.

2.9 Environment

If you use your motorcycle responsibly, you can ensure that problems and conflicts do not occur. To protect the

future of the motorcycle sport, make sure that you use your motorcycle legally, display environmental conscious-

ness, and respect the rights of others.

When disposing of used oil, other operating and auxiliary fluids, and used components, comply with the laws and

regulations of the respective country.

Because motorcycles are not subject to the EU regulations governing the disposal of used vehicles, there are no

legal regulations that pertain to the disposal of an end-of-life motorcycle. Your authorized KTM dealer will be glad

to advise you.

2 SAFETY ADVICE

10

2.10 Owner's Manual

Read this owner's manual carefully and completely before making your first trip. The Owner's Manual contains

useful information and many tips on how to operate, handle, and service your motorcycle. This is the only way to

find out how best to customize the vehicle for your own use and how you can protect yourself from injury.

Tip

Store the Owner's Manual on your terminal device, for example, so that you can read it whenever you need

to.

If you would like to know more about the vehicle or have questions on the material you read, please contact an

authorized KTM dealer.

The Owner's Manual is an important component of the vehicle. If the vehicle is sold, the Owner's Manual must be

downloaded again by the new owner.

The Owner's Manual can be downloaded several times using the QR code or the link on the delivery certificate.

The Owner's Manual is also available for download from your authorized KTM dealer and on the KTM website. A

printed copy can also be ordered from your authorized KTM dealer.

International KTM Website: KTM.COM

IMPORTANT NOTES 3

11

3.1 Manufacturer warranty, implied warranty

The work prescribed in the service schedule must only be carried out in an authorized KTM workshop and con-

firmed in the KTM Dealer.net, as otherwise all warranty claims will be void. Damage or secondary damage caused

by tampering with and/or conversions on the vehicle are not covered by the manufacturer warranty.

3.2 Fuel, auxiliary substances

Note

Environmental hazard Improper handling of fuel is a danger to the environment.

– Do not allow fuel to enter the groundwater, the soil, or the sewage system.

Use fuels and auxiliary substances in accordance with the Owner's Manual and specification.

3.3 Spare parts, technical accessories

For your own safety, only use spare parts and accessory products that are approved and/or recommended by KTM

and have them installed by an authorized KTM workshop. KTM accepts no liability for other products and any

resulting damage or loss.

Certain spare parts and accessory products are specified in parentheses in the descriptions. Your authorized KTM

dealer will be glad to advise you.

The latest news KTM PowerParts on your vehicle can be found on the KTM website.

International KTM Website: KTM.COM

3.4 Service

A prerequisite for perfect operation and prevention of premature wear is that the service, care, and tuning work

on the engine and chassis is properly carried out as described in the Owner's Manual. An incorrect suspension

setting can lead to damage and breakage of chassis components.

Use of the vehicle under difficult conditions, such as on sand or on wet, dusty and muddy surfaces, can result in

significantly increased wear of components, such as the drive train, brake system, air filter or suspension compo-

nents. For this reason, it may be necessary to inspect or replace parts before the next scheduled service.

It is imperative that you adhere to the stipulated run-in times and service intervals. If you observe these exactly,

you will ensure a much longer service life for your motorcycle.

The relevant mileage or time interval is whichever occurs first.

3.5 Figures

The figures contained in the manual may depict special equipment.

In the interest of clarity, some components may be shown disassembled or may not be shown at all. It is not

always necessary to disassemble the component to perform the activity in question. Please follow the instructions

in the text.

3.6 Customer service

Your authorized KTM dealer will be happy to answer any questions you may have on your vehicle and KTM.

A list of authorized KTM dealers can be found on the KTM website.

International KTM Website: KTM.COM

4 VIEW OF VEHICLE

12

4.1 View of vehicle, front left (example)

A01012-10

1

Clutch lever ( p. 16)

2

Fuel tank filler cap

3

Air filter box cover

4

Side stand ( p. 22)

5

Engine number ( p. 15)

6

Shift lever ( p. 22)

VIEW OF VEHICLE 4

13

4.2 View of vehicle, rear right (example)

A01013-10

1

Stop button ( p. 16)

1

Horn button ( p. 17) (All Six Days models, All EU/BR/CN models, 350 EXC‑F AR)

1

Light switch ( p. 17) (All Six Days models, All EU/BR/CN models, 350 EXC‑F AR)

1

Turn signal switch ( p. 18) (All Six Days models, All EU/BR/CN models, 350 EXC‑F AR)

2

Start button ( p. 18)

3

Emergency OFF switch ( p. 18)

4

Throttle grip ( p. 16)

5

Hand brake lever ( p. 16)

6

Fork part number ( p. 15)

7

Foot brake lever ( p. 22)

8

Engine oil level viewer

9

Level viewer for brake fluid, rear

5 SERIAL NUMBERS

14

5.1 Vehicle identification number

401945-10

The vehicle identification number

1

is stamped on the right side

of the steering head.

5.2 Type label

V01808-10

(All Six Days models, All EU/BR/CN models, 350 EXC‑F AR)

The Europe type label

1

is fixed to the front of the steering

head.

The Canada type label

2

is fixed to the front of the chest

tube.

M00994-10

(XCF‑W)

Type label

1

is fixed to the front of the steering head.

The additional type label for Canada

2

is fixed to the front of

the chest tube.

SERIAL NUMBERS 5

15

5.3 Key number (All EU models, All BR models, 350 EXC‑F AR, 350 EXC‑F SIX DAYS ASEAN)

402247-10

The key number

1

for the steering lock is stamped onto the key

connector.

5.4 Engine number

H01047-10

Engine number

1

is embossed on the left side of the engine over

the engine sprocket.

5.5 Fork part number

401947-10

The fork part number

1

is stamped on the inner side of the fork

stub.

5.6 Shock absorber article number

H02222-10

Shock absorber article number

1

is stamped on the top of the

shock absorber above the adjusting ring towards the engine side.

6 CONTROLS

16

6.1 Clutch lever

A00345-10

Clutch lever

1

is fitted on the handlebar on the left.

The clutch is activated hydraulically and adjusts itself automati-

cally.

6.2 Hand brake lever

E01205-10

The hand brake lever

1

is fitted on the right side of the handle-

bar.

The hand brake lever is used to activate the front brake.

6.3 Throttle grip

E01206-10

The throttle grip

1

is fitted on the right side of the handlebar.

6.4 Stop button

S01302-10

(All Six Days models, All EU/BR/CN models, 350 EXC‑F AR)

The stop button

1

is fitted on the left side of the handlebar.

CONTROLS 6

17

E00821-10

(XCF‑W)

The stop button

1

is fitted on the left side of the handlebar.

Possible states

• The stop button is in the basic position – In this position,

the ignition circuit is closed and the engine can be started.

• Stop button pressed – In this position, the ignition circuit

is interrupted, a running engine stops, and a non-running

engine will not start.

6.5 Horn button (All Six Days models, All EU/BR/CN models, 350 EXC‑F AR)

S01303-10

Horn button

1

is fitted on the left side of the handlebar.

Possible states

• The horn button is in the basic position

• The horn button is pressed – The horn is operated in this

position.

6.6 Light switch (All Six Days models, All EU/BR/CN models, 350 EXC‑F AR)

S01307-10

The light switch

1

is fitted on the left side of the handlebar.

Possible states

Low beam on – Light switch is in the central posi-

tion. In this position, the low beam and tail light are

switched on.

High beam on – The light switch is turned counter-

clockwise. In this position, the high beam and the tail

light are switched on.

6.7 Light switch (XCF‑W)

V01748-10

The light switch

1

is attached next to the combination instru-

ment on the left.

Possible states

• Light off – Light switch is pressed in up to the stop. In this

position, the light is switched off.

• Light on – Light switch is pulled out to the stop. In this posi-

tion, the low beam and tail light are switched on.

6 CONTROLS

18

6.8 Turn signal switch (All Six Days models, All EU/BR/CN models, 350 EXC‑F AR)

S01304-10

The turn signal switch

1

is fitted on the left side of the handle-

bar.

Possible states

Turn signal off – Turn signal switch is in the central

position.

Turn signal, left, on – The turn signal switch is turned

to the left.

Turn signal, right, on – The turn signal switch is

turned to the right.

6.9 Emergency OFF switch

V01749-10

(All Six Days models, All EU/BR/CN models, 350 EXC‑F AR)

The emergency OFF switch

1

is fitted on the right side of the

handlebar.

Possible states

Ignition off – In this position, the ignition circuit

is interrupted, a running engine stops, and a

non-running engine will not start.

Ignition on – In this position, the ignition circuit is

closed and the engine can be started.

6.10 Start button

V01749-11

(All EU models, All BR models, 350 EXC‑F SIX DAYS ASEAN)

Start button

1

is fitted on the right side of the handlebar.

V01750-10

(XCF‑W)

Start button

1

is fitted on the right side of the handlebar.

Possible states

• The start button is in the basic position

• The start button is pressed – The starter motor is actuated

in this position.

Page is loading ...

KTM 350 EXC-F 2022 Owner's manual

This manual is also suitable for

KTM 350 EXC-F 2022 Owner's manual

Related papers

Other documents