Gamber-Johnson Flat Surface Mount Installation guide

Gamber-Johnson
Brand
Gamber-Johnson
Model
Flat Surface Mount
Category
Wall & ceiling mounts accessories
Type
Installation guide

This manual is also suitable for

Gamber-Johnson Flat Surface Mount enables you to mount either a Gamber-Johnson pole or motion attachment to a flat surface. It's ideal for attaching devices like tablets or monitors to flat surfaces in vehicles or other applications. The mount is easy to install with 13/32" drill holes, 3/8" hex bolts, backup plates, washers, and lock nuts provided. It's designed with safety in mind, ensuring your devices are securely fastened while minimizing damage to the mounting surface. Experience enhanced functionality and convenience with the Gamber-Johnson Flat Surface Mount.

Gamber-Johnson Flat Surface Mount enables you to mount either a Gamber-Johnson pole or motion attachment to a flat surface. It's ideal for attaching devices like tablets or monitors to flat surfaces in vehicles or other applications. The mount is easy to install with 13/32" drill holes, 3/8" hex bolts, backup plates, washers, and lock nuts provided. It's designed with safety in mind, ensuring your devices are securely fastened while minimizing damage to the mounting surface. Experience enhanced functionality and convenience with the Gamber-Johnson Flat Surface Mount.

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Rev.A
INST-821
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
The 7160-1105 flat surface mount is designed to be used on flat surfaces and
mount either a Gamber-Johnson pole or motion attachment. Mounting
instructions specific to the poles or motion attachments will ship with the
individual devises.
Mounting the flat surface mount:
1. First mount the assembly or components being attached to the flat surface
mount. Place the full assembly on the flat surface to make sure there is
enough room for the full assembly in the desired location.
2. Verifiy the bottom surface (where the mount is being attched) is clear so
nothing is damaged when drilling the attachment holes.
3. Mark the four mounting hole locations on the flat surface where the mount
is going to be attached.
4. Drill a 13/32" hole at each marked location.
5. Attach the surface mount to the flat surface using the 3/8" hex bolts,
backup plates, washers, and lock nuts provided in hardware bag 7120-0811.
Revision
© Copyright 2017 Gamber-Johnson, LLC
7160-1105
FLAT SURFACE MOUNT
Form
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
PS-001
Printing Spec:
Product
INSTALLATION INSTRUCTIONS
Mounting hole
locations
Backup plates
(supports the bottom side
of the mounting surface)
  • Page 1 1

Gamber-Johnson Flat Surface Mount Installation guide

Gamber-Johnson
Brand
Gamber-Johnson
Model
Flat Surface Mount
Category
Wall & ceiling mounts accessories
Type
Installation guide
This manual is also suitable for

Gamber-Johnson Flat Surface Mount enables you to mount either a Gamber-Johnson pole or motion attachment to a flat surface. It's ideal for attaching devices like tablets or monitors to flat surfaces in vehicles or other applications. The mount is easy to install with 13/32" drill holes, 3/8" hex bolts, backup plates, washers, and lock nuts provided. It's designed with safety in mind, ensuring your devices are securely fastened while minimizing damage to the mounting surface. Experience enhanced functionality and convenience with the Gamber-Johnson Flat Surface Mount.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents