Panasonic HDC-HS100P User manual

VQT1T93

For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca

High Definition Video Camera

Operating Instructions

Model No. HDC-HS100P/PC

Before connecting, operating or adjusting this product, please read the instructions completely.

Spanish Quick Use Guide is included.

Guía para rápida consulta en español está incluida.

until

2008/8/4

HDCHS100P-VQT1T93_ENG.book 1 ページ２００８年７月１４日　月曜日　午後１時３６分

2

VQT1T93

Things You Should Know

Thank you for choosing Panasonic!

You have purchased one of the most sophisticated

and reliable products on the market today. Used

properly, we’re sure it will bring you and your family

years of enjoyment. Please take time to fill in the

information on the right.

The serial number is on the tag located on the

underside of your camera. Be sure to retain this

manual as your convenient camera information

source.

Safety Precautions

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,

≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND

THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE

APPARATUS.

≥ USE ONLY THE RECOMMENDED ACCESSORIES.

≥ DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN

ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK

OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS

AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the

power supply cord shall remain readily operable. To completely disconnect this apparatus from the

AC Mains, disconnect the power supply cord plug from AC receptacle.

Date of Purchase

Dealer Purchased From

Dealer Address

Dealer Phone No.

Model No.

Serial No.

The lightning flash with arrowhead

symbol, within an equilateral

triangle, is intended to alert the user

to the presence of uninsulated

“dangerous voltage” within the

product’s enclosure that may be of

sufficient magnitude to constitute a

risk of electric shock to persons.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE SCREWS.

NO USER-SERVICEABLE PARTS

INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and

maintenance (servicing) instructions

in the literature accompanying the

appliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

HDCHS100P-VQT1T93_ENG.book 2 ページ２００８年７月１４日　月曜日　午後１時３６分

3

VQT1T93

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

THE FOLLOWING APPLIES ONLY IN CANADA.

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

≥ Reorient or relocate the receiving antenna.

≥ Increase the separation between the equipment and receiver.

≥ Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

≥ Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, follow the attached installation instructions

and use only shielded interface cables with ferrite core when connecting to

computer or peripheral devices.

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate this

equipment.

Declaration of Conformity

Trade Name: Panasonic

Model No.: HDC-HS100P

Responsible party: Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

Support Contact: Panasonic Consumer Electronics Company

1-800-211-PANA (7262)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

HDC-HS100P

HDCHS100P-VQT1T93_ENG.book 3 ページ２００８年７月１４日　月曜日　午後１時３６分

4

VQT1T93

Batteries

1 Battery pack (Lithium ion battery pack)

≥ Use the specified unit to recharge the battery pack.

≥ Do not use the battery pack with equipment other than the specified unit.

≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals.

≥ Do not touch the plug terminals (i and j) with metal objects.

≥ Do not disassemble, remodel, heat or throw into fire.

2 Button-type battery (Lithium battery)

≥ Insert with poles aligned.

≥ Do not touch the terminals (i and j) with metal objects.

≥ Do not recharge, disassemble, remodel, heat or throw into fire.

≥ Keep out of reach of children

If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with

water.

If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly

with water, and then consult a doctor.

Warning

Risk of fire, explosion and burns. Do not disassemble.

Do not heat the batteries above the following temperatures or incinerate.

Button-type battery 60 oC (140 oF)

Battery pack 60 oC (140 oF)

AC adaptor

This AC adaptor operates on AC between 110 V and 240 V.

But

≥ In the U.S.A. and Canada, the AC adaptor must be connected to a 120V AC power supply only.

≥ When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to suit the

AC outlet configuration.

≥ When connecting to a supply of greater than AC 125V, ensure the cord you use is suited to the

voltage of the AC supply and the rated current of the AC adaptor.

≥ Contact an electrical parts distributor for assistance in selecting a suitable AC plug adaptor or AC

cord set.

Product Identification Marking is located on the bottom of units.

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special

handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

.

A lithium ion/polymer battery that is recyclable powers the product

you have purchased. Please call 1-800-8-BATTERY for information

on how to recycle this battery.

U.S.A./CANADA CONSUMERS: ATTENTION:

HDCHS100P-VQT1T93_ENG.book 4 ページ２００８年７月１４日　月曜日　午後１時３６分

5

VQT1T93

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the

unit and the applicable safety instructions listed below. Keep these operating instructions handy for

future reference.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install

in accordance with the manufacturer’s

instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9) Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding-type plug has two blades

and a third grounding prong. The wide blade

or the third prong are provided for your

safety. If the provided plug does not fit into

your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

11) Only use attachments/accessories specified

by the manufacturer.

12) Use only with the cart,

stand, tripod, bracket, or

table specified by the

manufacturer, or sold

with the apparatus. When

a cart is used, use

caution when moving the

cart/apparatus combination to avoid injury

from tip-over.

13) Unplug this apparatus during lightning

storms or when unused for long periods of

time.

14) Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

HDCHS100P-VQT1T93_ENG.book 5 ページ２００８年７月１４日　月曜日　午後１時３６分

6

VQT1T93

Precautions

USE & LOCATION

≥ TO AVOID SHOCK HAZARD ... Your camera

and power supply should not be exposed to

rain or moisture. Do not connect the power

supply or operate your camera if it gets wet.

Your camera has been designed for outdoor

use, however it is not designed to sustain

direct exposure to water, rain, sleet, snow,

sand, dust, or a direct splashing from a pool or

even a cup of coffee. This action could

permanently damage the internal parts of your

camera. Do not attempt to disassemble this

unit. There are no user serviceable parts

inside. Unplug your camera from the power

supply before cleaning.

≥ AS WITH ANY SMALL OBJECT, SD CARDS

CAN BE SWALLOWED BY YOUNG

CHILDREN. DO NOT ALLOW CHILDREN TO

HANDLE THE SD CARD.

≥ DO NOT AIM YOUR CAMERA AT THE SUN

OR OTHER BRIGHT OBJECTS

≥ DO NOT LEAVE THE CAMERA WITH THE

EVF AIMED DIRECTLY AT THE SUN AS

THIS MAY CAUSE DAMAGE TO THE

INTERNAL PARTS OF THE EVF

≥ DO NOT EXPOSE YOUR CAMERA TO

EXTENDED HIGH TEMPERATURE ... Such

as, in direct sunlight, inside a closed car, next

to a heater, etc... This action could

permanently damage the internal parts of your

camera.

≥ AVOID SUDDEN CHANGES IN

TEMPERATURE ... If the unit is suddenly

moved from a cold place to a warm place,

moisture may form on the SD card and inside

the unit.

≥ DO NOT LEAVE YOUR CAMERA OR THE

POWER SUPPLY TURNED ON WHEN NOT

IN USE.

≥ STORAGE OF YOUR CAMERA ... Store and

handle your camera in a manner that will not

subject it to unnecessary movement (avoid

shaking and striking). Your camera contains a

sensitive pick-up device which could be

damaged by improper handling or storage.

CARE

≥ TO CLEAN YOUR CAMERA ... Do not use

strong or abrasive detergents when cleaning

your camera body.

≥ TO PROTECT THE LENS ... Do not touch the

surface of the lens with your hand. Use a

commercial camera lens solution and lens

paper when cleaning the lens. Improper

cleaning can scratch the lens coating.

≥ TO PROTECT THE FINISH OF YOUR

CAMERA ... Before handling your camera,

make sure your hands and face are free from

any chemical products, such as suntan lotion,

as it may damage the finish.

-If you see this symbol-

∫ Indemnity concerning recording

content

The manufacturer shall in no event be liable for

the loss of recordings due to malfunction or

defect of this unit, its accessories or recordable

media.

WARNING

CAUTION

Information on Disposal in other Countries

outside the European Union

This symbol is only valid in the

European Union.

If you wish to discard this

product, please contact your

local authorities or dealer and

ask for the correct method of

disposal.

HDCHS100P-VQT1T93_ENG.book 6 ページ２００８年７月１４日　月曜日　午後１時３６分

7

VQT1T93

IMPORTANT

∫ Carefully observe copyright laws

Whatever you have recorded and created can

be used for your personal entertainment only.

Under copyright laws, other materials cannot

be used without obtaining permission from

the holders of the copyrights.

∫ Cards that you can use with this

unit

SD Memory Card and SDHC Memory Card

≥ 4 GB (or more) Memory Cards that do not have

the SDHC logo are not based on SD Memory

Card Specifications.

≥ Refer to page 26 for more details on SD cards.

∫ For the purposes of these

operating instructions

≥ SD Memory Card and SDHC Memory Card are

referred to as the “SD card”.

≥ Functions that can be used for motion picture

recording/motion picture playback are

indicated by in these operating

instructions.

≥ Functions that can be used for still picture

recording/still picture playback are indicated by

in these operating instructions.

≥ “HD Writer 2.6E for HDC” is referred to as the

“HD Writer 2.6E”.

≥ Pages for reference are indicated by an arrow,

for example: l 00

∫ Licenses

≥ SDHC Logo is a trademark.

≥ “AVCHD” and the “AVCHD” Logo are

trademarks of Matsushita Electric Industrial

Co., Ltd. and Sony Corporation.

≥ Manufactured under license from Dolby

Laboratories.

Dolby and the double-D symbol are

trademarks of Dolby Laboratories.

≥ HDMI, the HDMI Logo and the High-Definition

Multimedia Interface are the registered

trademarks or trademarks of HDMI Licensing

LLC.

≥ VIERA Link™ is a trademark of Matsushita

Electric Industrial Co., Ltd.

≥ EZ Sync™ is a trademark of Matsushita

Electric Industrial Co., Ltd.

≥ HDAVI Control™ is a trademark of Matsushita

Electric Industrial Co., Ltd.

≥ “x.v.Color” is trademark.

≥ LEICA is a registered trademark of Leica

Microsystems IR GmbH and DICOMAR is a

registered trademark of Leica Camera AG.

≥ Microsoft

®

, Windows

®

, Windows Vista

®

and

DirectX

®

are either registered trademarks or

trademarks of the Microsoft Corporation in the

United States and/or other countries.

≥ Microsoft product screen shot(s) reprinted with

permission from Microsoft Corporation.

≥ IBM and PC/AT are registered trademarks of

International Business Machines Corporation

of the U.S.

≥ Intel

®

, Core

™

, Pentium

®

and Celeron

®

are the

registered trademarks or trademarks of the

Intel Corporation in the United States and other

countries.

≥ AMD Athlon

™

is a trademark of the Advanced

Micro Devices, Inc.

≥ Apple, Mac OS is either registered trademarks

or trademarks of Apple Inc. in the United

States and/or other countries.

≥ PowerPC is a trademark of International

Business Machines Corporation.

≥ Other names of systems and products

mentioned in these instructions are usually the

registered trademarks or trademarks of the

manufacturers who developed the system or

product concerned.

This product is licensed under the AVC patent

portfolio license for the personal and non-

commercial use of a consumer to (i) encode

video in compliance with the AVC Standard

(“AVC Video”) and/or (ii) decode AVC Video that

was encoded by a consumer engaged in a

personal and non-commercial activity and/or was

obtained from a video provider licensed to

provide AVC Video. No license is granted or shall

be implied for any other use. Additional

information may be obtained from MPEG LA,

LLC. See http://www.mpegla.com

.

HDCHS100P-VQT1T93_ENG.book 7 ページ２００８年７月１４日　月曜日　午後１時３６分

8

VQT1T93

Contents

Accessories ........................................10

Features .............................................. 11

Quick Guide ........................................ 12

Preparation

Before using

[1] Handling of HDD

(Hard disk drive) ............................ 16

[2] Parts identification and

handling.......................................... 17

Remote control ................................ 20

Setup

[1] Power supply ................................. 22

Charging the battery ........................ 22

Inserting/removing the battery ......... 23

Charging and recording time ........... 24

Connecting to the AC outlet............. 25

[2] Preparation of SD cards................ 26

Cards that you can use

with this unit..................................... 26

Inserting/removing an SD card ........ 27

[3] Selecting a mode

(Turning the unit on/off)................ 28

Turning the power on and off with

the LCD monitor .............................. 28

[4] Using the menu screen ................. 29

Language selection ......................... 30

Menu list .......................................... 30

[5] Setting date and time .................... 33

World time setting (Displaying

the time of the travel destination) .... 34

[6] Adjusting LCD monitor/

viewfinder....................................... 35

LCD/EVF select switch .................... 35

Increasing the brightness of

the LCD monitor .............................. 35

Adjusting the brightness and

the color level .................................. 35

Adjusting the viewfinder

field of view...................................... 36

Recording showing the contents

to a partner ...................................... 36

Recording

Recording (Basic)

[1] Before recording ........................... 38

Auto Ground-Directional Standby

(AGS) .............................................. 39

Quick start....................................... 40

Quick power on ............................... 40

[2] Recording motion pictures .......... 41

Recording modes/approximate

recordable time ............................... 44

PRE-REC ........................................ 45

Shooting guide ................................ 45

[3] Recording still pictures ................ 46

Number of recordable pictures........ 48

[4] Zoom in/out function .................... 49

Digital zoom function....................... 49

[5] Optical image stabilizer

function.......................................... 50

[6] Intelligent auto mode .................... 51

Recording (Advanced)

[1] Recording functions of

operation icons ............................. 52

Operation icons............................... 52

[2] Recording functions of menus .... 58

[3] Recording manually by setting

the menu ........................................ 64

Scene mode.................................... 64

Wind noise reduction....................... 65

Microphone level ............................. 66

Picture adjustment .......................... 67

Zebra............................................... 67

Luminance....................................... 68

Histogram........................................ 68

[4] Recording manually using

the multi manual ring.................... 69

Zoom operation............................... 70

Manual focus adjustment ................ 70

White balance ................................. 71

Manual shutter speed/iris

adjustment....................................... 72

HDCHS100P-VQT1T93_ENG.book 8 ページ２００８年７月１４日　月曜日　午後１時３６分

9

VQT1T93

Playback

[1] Motion picture playback ............... 74

Creating still picture from

motion picture.................................. 77

Playing back motion pictures

by date............................................. 77

Intelligent scene selection ............... 78

Repeat playback.............................. 79

Resuming the previous playback..... 79

[2] Still picture playback..................... 80

Playing back still pictures by date

..... 82

Editing

[1] Deleting scenes/still pictures ....... 83

[2] Dividing a scene to delete ............ 85

[3]

Protecting scenes/still pictures

..... 86

[4] DPOF setting.................................. 87

[5] Copying between SD card

and HDD ......................................... 88

Confirming remaining capacity

on the copy destination.................... 88

Copying ........................................... 88

[6]

Formatting SD cards and HDD

....... 91

With a TV

[1] Watching Video/Pictures

on your TV...................................... 92

Connecting with a HDMI mini cable

... 95

Listening in 5.1 channel sound ........ 96

Connecting with the component cable

... 96

Connecting with the AV cable.......... 96

[2] Playback using VIERA Link

™

(HDAVI Control

™

)........................... 97

Backup

With other products

[1] Connecting a DVD burner to

copy to/play back a disc ............. 100

Preparing for copying/playing back

..... 100

Copying to discs ............................ 102

Playing back the copied disc ......... 106

Managing the copied disc

(Formatting, Auto protect,

Displaying disc information)........... 107

[2] Dubbing images onto other

video device................................. 108

[3] With a printer (PictBridge) .......... 109

With a PC

Before using

[1] What you can do with a PC ......... 112

End User License Agreement ........ 114

[2] Operating environment................ 115

Setup

[1] Installation .................................... 117

[2] Connection and recognition ....... 119

About the PC display..................... 120

Using with a PC

[1] Starting HD Writer 2.6E............... 121

Reading the operating instructions

of the software applications........... 121

[2] If using Macintosh....................... 122

Others

Indications

[1] Indications ................................... 124

[2] Messages ..................................... 127

About recovery .............................. 129

Helpful hints

[1] Functions that cannot be used

simultaneously ............................ 130

[2] Troubleshooting .......................... 132

Cautions for use............................... 140

Explanation of terms ....................... 143

Specifications................................... 145

Optional accessories....................... 148

Accessory Order Form

(For USA Customers).................... 150

Request for Service Notice

(USA Only) ........................................ 151

Limited Warranty

(For USA Customers) ...................... 152

Customer Services Directory.......... 153

Warranty

(For Canadian Customers).............. 154

Index.................................................. 155

Spanish Quick Use Guide/

Guía española para

el uso rápido..................................... 157

HDCHS100P-VQT1T93_ENG.book 9 ページ２００８年７月１４日　月曜日　午後１時３６分

10

VQT1T93

Accessories

Check the accessories before using this unit.

Battery pack

VW-VBG130

AV cable

K2KC4CB00027

AC adaptor

VSK0697

Component cable

K2KZ9DB00004

AC cable

K2CA2CA00025

USB cable

K2KYYYY00050

DC cable

K2GJYDC00002

CD-ROM

Remote control

N2QAEC000023

Button-type battery

CR2025

HDCHS100P-VQT1T93_ENG.book 10 ページ２００８年７月１４日　月曜日　午後１時３６分

11

VQT1T93

Features

∫ Very clear high definition pictures

This unit can record detailed high definition images to an SD card or HDD (hard disk drive).

High definition images (1920k1080)

*

A Number of available scan lines 1080

Standard images (720k480)

B Number of available scan lines 480

High definition images

≥ High definition images have more than approximately 2 times the number of available scan lines and

approximately 6 times

*

the number of pixels compared with standard images.

≥ The still pictures above are images for explanation purposes.

* If the recording mode is HA/HG/HX.

What is AVCHD?

This is a format for recording and playing back highly detailed high definition images.

Images are recorded based on the MPEG-4 AVC/H.264 codec for compressing images and audio is

recorded with the Dolby Digital 5.1 Creator.

≥ Since the recording method is different from an ordinary DVD video etc., the data is not compatible.

∫ Compatibility with other products





With other products Available function Picture quality

Watching Video/

Pictures on your TV

(l 92 to 98)

Playback with the HDMI mini cable

jPlayback using VIERA Link

™

(HDAVI Control

™

)

(l 97)

High definition

images

Playback with the component cable [1080i]

Playback with the component cable [480i] Standard images

Playback with the AV cable

Using a DVD burner

(l 100 to 107)

Connecting a DVD burner to copy to/play back a

disc

jPlaying back the copied disc (l 106)

High definition

images

What you can do with a

PC

(l 112 to 113)

Copying data to a PC and easy editing

Writing data to DVD discs and SD cards

Converting the motion picture data to MPEG2 Standard images

Creating a DVD Video disc

Dubbing images onto

other video device

(l 108)

Dubbing images when connecting with the AV cable

HDCHS100P-VQT1T93_ENG.book 11 ページ２００８年７月１４日　月曜日　午後１時３６分

12

VQT1T93

Quick Guide

∫ Charging the battery

1) Connect the AC cable to the AC adaptor and

the AC outlet.

2) Insert the battery into the battery charger by

aligning the arrows.

∫ Inserting the battery

Install the battery by inserting it in the direction

shown in the figure.

A Insert the battery until it clicks and locks.

∫ How to turn on the power

Turn on the power by turning the mode dial to

or while pressing the lock release

button A.

≥ Rotate the mode dial while at the same time

pressing in the lock release button if changing

from OFF to another mode.

≥ Align with the status indicator B.

≥ To turn off the power, set the mode dial to OFF.

∫ Inserting/removing an SD card

1) Open the LCD monitor.

≥ Check that the card access lamp has gone off.

2) Open the SD card cover by sliding the OPEN

lever B.

3) Insert/remove the SD card.

≥ When inserting an SD card, face the label side

C in the direction shown in the illustration and

press it straight in as far as it will go.

≥ When removing the SD card, press the center

of the SD card and then pull it straight out.

4) Securely close the SD card cover.

≥ Securely close it until it clicks.

Charging lamp

[CHARGE] A

Lights up:

Charging

Goes off:

Charging

completed

Card access lamp [ACCESS] A

≥ When this unit is accessing the card, the

access lamp lights up.

HDCHS100P-VQT1T93_ENG.book 12 ページ２００８年７月１４日　月曜日　午後１時３６分

13

VQT1T93

∫ Language selection

1) Press the MENU button, then select

[LANGUAGE] and press the cursor button.

2) Select [English] and press the cursor button.

∫ Help mode

The help mode explains the operation icons

displayed. (Except headphone volume

adjustment)

≥ Rotate the mode dial to select .

1) Press the cursor button to display the icon.

2) Move the cursor button right to select [ ].

3) Move the cursor button up, left or right to

select the desired icon.

≥ An explanation of the selected icon scrolls at

the bottom of the screen.

≥ The indication changes each time the cursor

button is moved down.

≥ When the help mode is used, functions cannot

be set.

To exit the Help mode

Press the MENU button or select [END].

∫ Recording motion pictures

1) Rotate the mode dial to select .

2) Set the LCD/EVF select switch to LCD or

EVF.

≥ Open the LCD monitor when it is set to LCD.

3) Press the MENU button, then select

[MEDIA SELECT] # [HDD] or [SD CARD]

and press the cursor button.

4) Press the recording start/stop button to start

recording.

∫ Recording still pictures

1) Rotate the mode dial to select .

2) Set the LCD/EVF select switch to LCD or

EVF.

≥ Open the LCD monitor when it is set to LCD.

3) Press the MENU button, then select

[MEDIA SELECT] # [HDD] or [SD CARD]

and press the cursor button.

4) Press the button fully to take the picture.

0h00m00s0h00m00s0h00m00s

R1h20mR1h20mR1h20m

HG

HDCHS100P-VQT1T93_ENG.book 13 ページ２００８年７月１４日　月曜日　午後１時３６分

14

VQT1T93

∫ Motion picture playback

1) Rotate the mode dial to select .

2) (When playing back from an SD card)

Select [ ] (motion picture playback) B of

[ ] (card playback) tab A with the cursor

button.

(When playing back from a HDD)

Select [ ] (motion picture playback) D of

[ ] (HDD playback) tab C with the cursor

button.

3) Select the scene to be played back and

press the cursor button.

4) Select the playback operation with the cursor

button.

1/;: Playback/Pause

6: Rewind playback

5: Fast forward playback

∫: Stops the playback and shows the

thumbnails.

∫ Still picture playback

1) Rotate the mode dial to select .

2) (When playing back from SD card)

Select [ ] (still picture playback) B of

[ ] (card playback) tab A with the cursor

button.

(When playing back from HDD)

Select [ ] (still picture playback) D of

[ ] (HDD playback) tab C with the cursor

button.

3) Select the still picture to be played back and

press the cursor button.

4) Select the playback operation with the cursor

button.

1/;: Slide show (playback of the still pictures

in numerical order) start/pause.

2;: Plays back the previous picture.

;1: Plays back the next picture.

∫: Stops the playback and shows the

thumbnails.

HDCHS100P-VQT1T93_ENG.book 14 ページ２００８年７月１４日　月曜日　午後１時３６分

15

VQT1T93

Preparation

Recording

Playback

Backup

With a PC

Others

16 Before using

22 Setup

HDCHS100P-VQT1T93_ENG.book 15 ページ２００８年７月１４日　月曜日　午後１時３６分

16

VQT1T93

Before using

1

Handling of HDD

(Hard disk drive)

The unit is equipped with the built-in 60 GB

*

HDD. While the HDD is capable of storing a large amount of

data, there are a few things to look out for. When using this component, pay attention to the following points.

* The usable HDD space is generally calculated as 1 GB=1,000,000,000 bytes. The capacities of this

unit, PCs and software are expressed as 1 GB=1,024k1,024k1,024=1,073,741,824 bytes.

Therefore, the indicated value of the capacity appears to be smaller.

∫ Do not expose the HDD to

vibrations and shocks.

Due to the environment and handling conditions,

the HDD may be subject to partial damages or

may not be able to read, record, and play back

data. Do not expose the unit to vibrations or

shock, and do not turn off the power during

recording or playback.

If the unit is used in a place with loud sounds,

such as a club or similar venue, the recording may

stop due to sound vibrations. Recording data on

an SD card is recommended in these places.

∫ Back up data periodically.

The HDD is temporary storage. In order to avoid

erasing data due to static electricity,

electromagnetic waves, breakage, and failures,

back up the data to a PC or DVD disc. (

l

100, 112)

∫ If the HDD experiences any

abnormality, back up data

immediately.

Failure in the HDD may produce continuous

noise or choppy sound during recording or

playing back. Continuous use will cause further

deterioration, and may eventually disable the

HDD. If these phenomena are observed, copy

the data on the HDD to a PC, a DVD disc etc.

immediately and contact consumer support.

(l 153, 154)

Once the HDD is out of order, data cannot be restored.

∫ Operation may stop in hot or cold

environments.

If the surrounding temperature is too hot or too cold,

the unit is disabled in order to protect the HDD.

∫ Do not use the unit in low

atmospheric pressures.

The HDD may fail if it is used at altitudes of

3000 m (9800 feet) or higher above sea level.

∫ Transportation

When the unit is transported, turn off the power

and be careful not to shake, fall, or impact the unit.

∫ Falling detection

[ ] is indicated on the screen when it detects a

falling state (a weightless state). In that case,

HDD operation noise may be recorded. If the

falling state is detected repeatedly, the unit may

stop the recording or playback operation in order

to protect the HDD.

∫

HDD access lamp [ACCESS HDD]

A

≥ The lamp illuminates while the HDD is being

accessed (initialization, recording, playback,

deleting etc.).

≥ Do not perform the following operations when

the lamp illuminates. It may damage the HDD

or cause a malfunction in the unit.

jTurn the unit off

jInsert and remove the USB cable

jExpose the unit to vibrations or shock

≥

About disposing of or giving away this unit. (

l

141)

Indemnity about recorded content

Panasonic does not accept any responsibility

for damages directly or indirectly due to any

type of problems that result in loss of

recording or edited content, and does not

guarantee any content if recording or editing

does not work properly. Likewise, the above

also applies in a case where any type of repair

is made to the unit (including any other non-

HDD related component).

HDCHS100P-VQT1T93_ENG.book 16 ページ２００８年７月１４日　月曜日　午後１時３６分

17

VQT1T93

Before using

2

Parts identification and

handling

1 LCD monitor open

2 LCD monitor (l 35)

Pull the LCD monitor out in the direction of the

arrow with your fingers.

≥ It can open up to 90o.

≥ It can rotate up to 180o A towards the lens or

90o B towards the viewfinder.

3 Speaker

4 Optical image stabilizer button [ ,

O.I.S.] (l 50)

5 Delete button [ ] (l 83)

6 Cursor button

Use the cursor button to select the recording

functions and playback operations, and to

operate the menu screen.

1 Select by moving up, down, left, right.

2 Set by pressing the center.

≥ Menu screen operations (l 29)

≥ To select the recording functions (l 52 ,58)

≥ Playback operations (l 74)

AV/

2

3

4

5

6

7

8

9

10

11

1

12

13

14

16

17

18

19

20

15

Due to limitations in LCD production

technology, there may be some tiny bright or

dark spots on the LCD monitor screen.

However, this is not a malfunction and does

not affect the recorded picture.

HDCHS100P-VQT1T93_ENG.book 17 ページ２００８年７月１４日　月曜日　午後１時３６分

18

VQT1T93

7 Intelligent auto button [iA] (l 51)

8 PRE-REC button [PRE-REC] (l 45)

9 Menu button [MENU] (l 29)

10 Battery holder (l 23)

11 DC input terminal [DC IN] (l 25)

12 USB terminal [ ] (l 100, 109, 119)

13 HDMI mini connector [HDMI] (l 92, 97)

14 Audio-video/headphone output terminal

[AV/ ] (l 31, 56, 92, 108)

≥ Use the AV cable (only the supplied cable) or

headphones.

≥ Setup the [AV JACK] in the menu when the

headphones are used. (l 31)

15 Component terminal [COMPONENT]

(l 92)

16 Card access lamp [ACCESS] (l 27)

17 Card slot (l 27)

18 SD card cover (l 27)

19 SD card open lever [OPEN] (l 27)

20 Disc copy button [DISC COPY] (l 102,

105)

21 Lens cover

≥ The lens cover opens in

recording mode.

(l 28)

22 Multi manual ring (l 69)

23 Mode select switch [AUTO, MANUAL,

FOCUS/ZOOM] (l 39, 64, 69)

24 Camera function button [CAM FUNC]

(l 69)

25 Remote control sensor (l 21)

26 Recording lamp (l 30)

27 Built-in flash (l 61)

28 Lens (LEICA DICOMAR)

29 Lens hood

Rotate the lens hood counter-clockwise A to

remove it. In order to attach it, place into slot B,

and then rotate it clockwise C.

≥ When fitting the tele conversion lens

(VW-T3714H; optional) or the wide conversion

lens (VW-W3707H; optional), first remove the

lens hood.

21

22

23

24

25

26

Be careful about the following.

When 2 lens accessories, such as the ND

filter and tele conversion lens, are fitted and

the zoom lever is pressed toward the W side,

the 4 corners of an image will be darkened.

(Vignetting)

(When fitting 2 lens accessories, first remove

the lens hood and then fit them.)

27

28

29

MIC

30

HDCHS100P-VQT1T93_ENG.book 18 ページ２００８年７月１４日　月曜日　午後１時３６分

19

VQT1T93

30 Microphone terminal [MIC]

≥ A compatible plug-in powered microphone can

be used as an external microphone.

≥ Audio will be stereo (2 ch) with the external

microphone input.

≥ Make sure that the microphone cable is out of

the way from the lens so it will not be recorded

in the images.

≥ When the unit is connected with the AC

adaptor, sometimes noise may be heard

depending on the microphone type. In this

case, please switch to the battery for the power

supply and the noise will stop.

31 Mode dial (l 28)

32 Recording start/stop button (l 41)

33 Status indicator (l 28)

34 LCD/EVF select switch [EVF/LCD] (l 35)

35 Viewfinder (l 35)

36 Eyepiece corrector dial (l 36)

37 HDD access lamp [ACCESS HDD] (l 16)

38 Photoshot button [ ] (l 46)

39 Zoom lever [W/T] (In recording mode)

(l 49)

Volume lever [sVOLr] (In playback

mode) (l 75)

40 Accessory shoe

≥ The video DC light/VW-LDC103PP (optional)

should be mounted here.

41 Internal microphones (5.1 channel

support)

31

32

33

34

35

36

37

38

39

40

41

42

43

Due to limitations in LCD production

technology, there may be some tiny bright or

dark spots on the viewfinder screen. However,

this is not a malfunction and does not affect

the recorded picture.

HDCHS100P-VQT1T93_ENG.book 19 ページ２００８年７月１４日　月曜日　午後１時３６分

20

VQT1T93

42 Grip belt

Adjust the length of the grip belt so that it fits your

hand.

1 Flip the belt.

2 Adjust the length.

3 Replace the belt.

43 Shoulder strap fixture

44 Battery release lever [BATTERY] (l 23)

45 Tripod receptacle

This is a hole for attaching the unit to the optional

tripod. (For details on mounting the tripod, refer

to the operating instructions for the tripod.)

A Camera base

1 Photoshot button [ , PHOTO SHOT]

*

2 On-screen display button [EXT DISPLAY]

(l 94)

3 Date/time button [DATE/TIME] (l 33)

4 Playback operation buttons (l 76)

5 Delete button [ ]

*

6 Direction buttons [3,4,2,1]

These buttons operate similar to how the cursor

button moves up/down/right/left on the unit.

7 Recording start/stop button [START/

STOP]

*

8 Zoom/volume buttons [ZOOM, VOL]

*

9 Menu button [MENU]

*

10 Enter button [ENTER]

This button operates similar to pressing the

cursor button on the unit.

* means that these buttons function in the same

manner as the corresponding buttons on the

unit.

44

45

Remote control

CAUTION

Danger of explosion if battery is incorrectly

replaced. Replace only with the same or

equivalent type recommended by the

manufacturer. Dispose of used batteries

according to the manufacturer’s instructions.

ZOOM

START/

STOP

PHOTO

SHOT

EXT

DISPLAY

DATE/

TIME

VOL

PLAY

STOPSKIP SKIP

MENU

ENTER

PAUSE

SEARCH

STILL ADV STILL ADV

SEARCH

1

2

3

4

6

5

7

8

9

10

HDCHS100P-VQT1T93_ENG.book 20 ページ２００８年７月１４日　月曜日　午後１時３６分

Page is loading ...

Panasonic HDC-HS100P User manual

This manual is also suitable for

Panasonic HDC-HS100P User manual

Related papers

Other documents