Star 524TGF Owner's manual

® ®® ®

ELECTRIC

GRIDDLES

MODEL

515TGF, 524TGF,

536TGF, 536TGF-PE, 548TGF

CHROME-MAX MODEL

524CHSF, 536CHSF, 548CHSF

Installation and

Operation

Instructions

2M-Z16009 Rev. E 06/2019

536TGF

EPH

ANSI/NSF 4

2M-Z16009 Star-Max Electric Griddle

These symbols are intended to alert the user to the presence of

important operating and maintenance instructions in the manual

accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

Using any part other than genuine Star factory supplied parts relieves the

manufacturer of all liability.

notice. Such revisions do not entitle the buyer to corresponding changes,

improvements, additions or replacements for previously purchased

equipment.

Due to periodic changes in designs, methods, procedures, policies and

without notice. While Star International Holdings Inc., Company exercises

good faith efforts to provide information that is accurate, we are not

responsible for errors or omissions in information provided or conclusions

provided, the user assumes all risks in connection with such use.

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance.

Please record the model number, serial number, voltage and purchase date in the area below and have it

ready when you call to ensure a faster service.

SAFETY SYMBOL

Model No.

Serial No.

Voltage

Purchase Date

Business 8:00 am to 4:30 p.m. Central Standard Time

Hours:

Telephone: (800) 264-7827

Fax: (314) 781-2714

E-mail [email protected]

Website: www.star-mfg.com

Service Help Desk

Authorized Service Agent Listing

Reference the listing provided with the unit

for an updated listing go to:

Website: www.star-mfg.com

E-mail [email protected]

Mailing Address: Star Manufacturing International Inc.

265 Hobson Street

Smithville, TN 37166

U.S.A

2M-Z16009 Star-Max Electric Griddle

GENERAL INFORMATION

This equipment is designed and sold for commercial use only by personnel trained and experienced in

its operation and is not sold for consumer use in and around the home nor for use directly by the general

public in food service locations.

Before using your new equipment, read and understand all the instructions & labels associated with the

unit prior to putting it into operation. Make sure all people associated with its use understand the units

operation & safety before they use the unit.

All shipping containers should be checked for freight damage both visible and concealed. This unit has

been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is

received in damaged condition, either apparent or concealed, a claim must be made with the delivering

carrier.

Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a

request for inspection of concealed damage must be made with carrier within 15 days. Be certain to

retain all contents plus external and internal packaging materials for inspection. The carrier will make an

inspection and will supply necessary claim forms.

INSTALLATION

The griddles are equipped for the voltage indicated on the nameplate mounted under the bullnose on the

front panel. They will operate on alternating current (AC) only.

DO NOT CONNECT TO DIRECT CURRENT (DC).

The installation of the electric griddle should conform to the:

NATIONAL ELECTRIC CODE AND ALL LOCAL ELECTRIC CODES AND

ORDINANCES AND THE LOCAL ELECTRIC COMPANY RULES AND

REGULATIONS

For your protection we recommend that a qualied electrician install this griddle. He should be familiar with

electrical installations and all electric codes. Proper connections and power supply are essential for efcient

performance. The external wiring should be in conduit or an approved type of exible cable suitable for operation

at the temperature indicated on the wiring diagram, and of a proper size to carry the load. The supply circuit

should be properly fused and equipped with a means of disconnecting, as required by local electrical code.

THE BODY OF THE GRIDDLE SHOULD BE GROUNDED (DO NOT GROUND TO A GAS SUPPLY

LINE).

GENERAL OPERATING PROCEDURES

The Chrome-Max and Star-Max series electric griddles may be wired for operation in the eld for either

1-phase or 3-phase power supplies by making line connections at the junction box(es) located at the rear

of the unit. Two junction boxes are provided on the 548TGF for making line connections. These may be

connected in parallel to one 16KW 3-phase line or on two separate 8KW lines.

CONNECTING POWER SUPPLY

Detach cover on junction box at rear of unit. There are pigtail leads for the supply connection in the junction box.

LOCATING AND LEVELING THE UNIT

Do not install the unit closer than 1-inch from a side wall and/or closer than 1-inch from a rear wall. Level

unit by adjusting the (4) feet which have an adjustment of 1-3/4” (43.75mm) for accurate leveling and perfect

line-up with other Star-Max series units. After the griddle is in its nal position, adjust the legs to create 1/8

inch slant from back to front on the griddle plate. This will allow grease to run into the grease gutter and

provide the proper air ow.

EXHAUST CANOPY

Griddles inherently create a good deal of heat and smoke and should be installed under an efcient

exhaust hood with ame proof lters. A vertical distance of not less than 48” shall be provided between

the top of the appliance and lters or any other combustible material. Exhaust installation must conform

to local codes.

AIR SUPPLY: Provisions for adequate air supply must be provided.

CAUTION

WARNING

2M-Z16009 Star-Max Electric Griddle

SEASONING THE GRIDDLE HEATING SURFACE (NON CHROMIUM SURFACE)

Clean the griddle surface thoroughly. After the griddle has been thoroughly cleaned, it should be

seasoned to prevent food from sticking. Before using and after each thorough scouring, season the

griddle heating surface in the following manner.

1. Turn temperature control dials to 350°F (177°C).

2. Using a clean cloth, not a spatula, spread a thin lm of cooking oil over the griddle cooking surface.

This lm should remain on the hot griddle surface for half an hour.

3. Remove the excess oil and wipe clean.

4. Apply another lm of cooking oil over the hot cooking area for another half hour and again remove

excess oil and wipe clean. The griddle surface should now be ready for use.

Even with careful seasoning, food may, to some extent, stick to the griddle cooking surface until the

griddle plate is broken in.

TEMPERATURE CONTROL

The temperature controls are combination “ON/OFF” switches and thermostats. Turning the dial knob

automatically maintains the selected heat range.

The Star-Max/Chrome-Max electric griddle line has one thermostat for every 12” (30cm) section

of griddle that operates independently of one another. Each thermostat controls the section of the

griddle above it and may be set at different temperatures as desired.

COOKING

Set the thermostat dial knob at the temperature desired. After a short pre-heating period, the

thermostat will automatically maintain the selected temperature.

IDLING

During idle periods, to save on operating costs, lower the temperature setting of the thermostat to

about 250°F (121°C). It is not necessary to maintain cooking temperature during idle periods, as the

griddle can quickly be reheated to the desired temperature.

SIGNAL LIGHTS

Each thermostat has its own signal light which indicates when the unit’s control knob is not in the off

position.

GRIDDLE CARE (NON-CHROMIUM SURFACES)

It takes very little time and effort to keep the griddle attractive and performing at top efciency.

If grease is permitted to accumulate, it will form a gummy cake and then carbonize into a hard

substance which is extremely difcult to remove. To prevent this condition, the following suggestions

for cleanliness should be followed:

1. After each use, scrape the griddle with a scraper or exible spatula to remove excess grease and

food. A waste drawer is provided for the scrapings. If there is an accumulation of burned on grease

and food, the griddle should be thoroughly scoured and reseasoned. Use pumice or griddle stone

while the griddle is warm. Do not use steel wool because of the danger of steel slivers getting into

the food.

2. Daily, use a clean cloth and a good non-abrasive cleaner to clean the stainless steel body of the

griddle. Wipe the polished front with a soft cloth.

3. At least once a day, remove the waste drawer and wash in the same way as an ordinary cooking

utensil. The drawers are removed by pulling forward until they are released from their track.

2M-Z16009 Star-Max Electric Griddle

GRIDDLE CARE (CHROMIUM SURFACES)

It takes very little time and effort to keep this Industrial Chromium griddle surface sparkling clean and

performing at top efciency. DO NOT allow grease to accumulate as it will carbonize and become

difcult to remove. To prevent this condition the following cleaning suggestions should be followed:

1. Remove excess grease and food regularly with a 4” (100mm) wide Razor Sharp type scraper and

wipe surface with a damp cloth if desired.

2. Following the scraping, for end of the day cleaning, a damp cloth and a non-silicated, non-abrasive,

non-chlorinated cleaner such as Bon-Ami may be used to wipe surface clean, followed by wiping

with a clean wet cloth.

3. Follow steps 2 and 3 from Griddle Care (Non-Chromium Surfaces) above.

1. Never use pumice, griddle stones, or abrasives on a chromium surface.

2. Never strike a chromium griddle surface with a sharp instrument or spatula edge.

3. Never use steel wool.

4. Never use commercial liquid grill cleaner on the griddle surface.

5. Abusing surface voids the warranty.

MAINTENANCE AND REPAIRS

Contact the factory, a service representative, or a local service company for service or required

maintenance.

CHROME-MAX GRIDDLE SURFACE LIMITED WARRANTY EXCLUSIONS

Your Chrome-Max griddle has been designed to give you many years of cooking reliability and

requires minimum maintenance to keep the chrome surface in its original condition. All Chrome-

Max griddle surfaces are warranted for a period of 5 years against manufacturing defects to the

original owner from the date of installation. This limited warranty is void if it is determined by Star

Manufacturing International Incorporated or one of its authorized representatives that the chrome

surface has been misused or abused or subjected to the following situations:

1. Improperly installed.

2. Incorrect voltage applied to electric Chrome-Max units allowing the surface to overheat and

discolor.

3. The misuse of any instrument or tool which scratches or makes indentations in the surface which

could cause the surface to peel, ake, or chip off.

4. The use of any chemical or abrasive cleaning solution, griddle brick, stone, screen or other cleaning

products which could damage and affect the performance of the chrome surface.

5. The neglect of daily routine maintenance to the chromium surface.

CAUTION

2M-Z16009 Star-Max Electric Griddle

LIMITED EQUIPMENT WARRANTY

Star Manufacturing [as well as its subsidiaries,

Toastmaster and Holman] warranties new products to

be free from defects in material and/or workmanship

for a period of one [1] year from the date of original

installation, except as noted below. Defects that

occur as a result of normal use, within the time period

and limitations deﬁned in this warranty, will at Star’s

discretion have the parts replaced or repaired by Star or

a Star-authorized service agency.

THIS WARRANTY IS SUBJECT TO ALL LISTED CONDITIONS.

Repairs performed under this warranty are to be

performed by a Star authorized service agency. Star

will not be responsible for charges incurred or service

performed by non-authorized repair agencies. In all

cases, the nearest Star-authorized service agency must

be used. Star will be responsible for normal labor charges

incurred in the repair or replacement of a warrantied

product within 50 miles (80.5 km) of an authorized

service agency. Time and expense charges for anything

beyond that distance will be the responsibility of the

owner. All labor will need to be performed during regular

service hours. Any overtime premium will be charged

to the owner. For all shipments outside the U.S.A. and

Canada, please see the International Warranty for speciﬁc

details. It is the responsibility of the owner to inspect and

report any shipping damage claims, hidden or otherwise,

promptly following delivery. No mileage or travel charges

will be honored on any equipment that is deemed

portable. In general, equipment with a cord and plug

weighing less than 50 lb. (22.7 kg) is considered portable

and should be taken or shipped to the closest authorized

service agency, transportation prepaid.

PORTABLE EQUIPMENT EXAMPLES

WARRANTY EXCLUSIONS

THE FOLLOWING WILL NOT BE COVERED UNDER WARRANTY.

• Any product which has not been used, cleaned,

maintained, or installed in accordance with the directions

published in the appropriate installation sheet and/

or owner’s manual as well as national and local codes,

including incorrect gas, electrical, or water connection. Star

is not liable for any unit which has

been mishandled, abused, misapplied, subjected to

chlorides, harsh chemicals, or caustic cleaners, damaged

from exposure to hard water, modiﬁed by unauthorized

personnel, damaged by ﬂood, ﬁre, or other acts of nature

[or God], or which have an altered or missing serial number.

• Installation, labor, and job checkouts, calibration of heat

controls, air and gas burner/bypass/pilot adjustments, gas

or electrical system checks, voltage and phase conversions,

cleaning of equipment, or seasoning of griddle surface.

• Replacement of fuses or resetting of circuit breakers,

safety controls, or reset buttons.

• Replacement of broken or damaged glass components,

quartz heating elements, and light bulbs.

• Labor charges for all removable parts in gas charbroilers

and hotplates, including but not limited to burners, grates,

and radiants.

• Any labor charges incurred by delays, waiting time, or

operating restrictions that hinder a service technician’s

ability to perform service.

• Replacement of items subject to normal wear or items

that can easily be replaced during a daily cleaning routine,

such as but not limited to knobs, bulbs, fuses, quartz

heating elements, baskets, racks, and grease drawers.

• Components that should be replaced when damaged

or worn, but have been ﬁeld-repaired instead [eg. ﬁeld-

welded fry pots]

• Any loss of business or proﬁts.

PRODUCTS PARTS LABOR

Star-Ultra Max® fryers, griddles,

charbroilers, and hotplates

2 years 2 years

Star-Max® fryers, griddles, char-

broilers, and hotplates

2 years 2 years

Jetstar® popcorn poppers

2 years 2 years

Staltek™ roller grill coatings

5 years

Cast iron grates, burners; and

burner shields

180 days

Star, Toastmaster, or Holman

parts sold to repair equipment

90 days

Service First 1 year

The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty.

2M-Z21647 ∙ Rev. E ∙ 01.2019

• 514LL fryer

• 15MC and 18MCP hot food

merchandisers

• QCS1, QCS2, and RCS2 toasters

• 16PD-A pretzel merchandisers

• Condiment dispensers

except HPD- and SPD-series

models

• All pop-up toasters

• All pastry display cabinets

• All heat lamps

• J4R popcorn machine

• 12NCPW and 15NCPW nacho

merchandisers

• Nacho cheese warmers

except 11WLA-series models

• Specialty food warmers

except 130R, 11RW, and 11WSA

models

• All butter dispensers

• All nacho chip merchandisers

• All accessories

CONTACT

Should you require any assistance regarding the

operation or maintenance of any Star equipment;

write, phone, fax or email our service department. In

all correspondence mention the model number and

serial number of your unit, as well as the voltage or

type of gas you are using.

Business hours are 8:00 a.m. to 4:30 p.m. Central

Standard Time (CST)

Telephone: (800)-264-7827

Fax: (314)-781-2714

Email: Customerservic[email protected]om

www.star-mfg.com

2M-Z16009 Star-Max Electric Griddle

MATERIAL

DR.

DATE

FINISH

MODEL NO.

TITLE

PART NO.

TOLERANCES UNLESS OTHERWISE NOTED

FRACTIONS ±1/64 DECIMALS ±.005 ANGLES ±1°

REVISIONS

515TGD

SK 1925

WIRING DIAGRAM 15" ELEC. GRIDDLE

2-20-03

CK.

LTR DATE DESCRIPTION OF CHANGE DR

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.

NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

STAR MANUFACTURING INTERNATIONAL INC.

#10 SUNNEN DRIVE, ST. LOUIS, MO. 63143, USA

FRAME GROUND

THERMOSTAT

HEATING ELEMENT

PILOT LIGHT

NOMINAL AMPS PER LINE WIRE

3,004 WATTS 4,000 WATTS

208V-1 PHASE 240V-1 PHASE

16.6614.44

AWGAWG

#14#14

NOTE:

1) FOR SUPPLY CONNECTIONS USE COPPER WIRE ONLY,

SUITABLE FOR AT LEAST 90°C (194°F). USE GAUGE SHOWN

OR LARGER.

2) ALL INTERNAL WIRING IS #14 GA.

MATERIAL

DR.

DATE

FINISH

MODEL NO.

TITLE

PART NO.

TOLERANCES UNLESS OTHERWISE NOTED

FRACTIONS ±1/64 DECIMALS ±.005 ANGLES ±1°

REVISIONS

524TGD

SK 1926

WIRING DIAGRAM 24" ELEC. GRIDDLE

2-20-03

CK.

LTR DATE DESCRIPTION OF CHANGE DR

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.

NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

STAR MANUFACTURING INTERNATIONAL INC.

#10 SUNNEN DRIVE, ST. LOUIS, MO. 63143, USA

NOMINAL AMPS PER LINE WIRE

208V-3 PHASE

6008 WATTS

AWG

#16

14.44

AWG

#12

24.98

14.44

AWG

#16

240V-3PHASE

8000 WATTS

X Y Z

#14

16.66

AWG

#10

28.86

AWGAWG

#14

16.66

208V

1 PH

28.88

#10

240V

1 PH

33.3

AWG

FRAME GROUND

3 PHASE CONNECTION

SINGLE PHASE CONNECTION

THERMOSTAT

PILOT LIGHT

HEATING ELEMENT

2 2

NOTE:

1) FOR SUPPLY CONNECTIONS USE COPPER WIRE ONLY,

SUITABLE FOR AT LEAST 90°C (194°F). USE GAUGE SHOWN

OR LARGER.

2) ALL INTERNAL WIRING IS #14 GA.

2M-Z16009 Star-Max Electric Griddle

MATERIAL

DR.

DATE

FINISH

MODEL NO.

TITLE

PART NO.

TOLERANCES UNLESS OTHERWISE NOTED

FRACTIONS ±1/64 DECIMALS ±.005 ANGLES ±1°

REVISIONS

536TGD

SK1927

WIRING DIAGRAM 36" ELEC. GRIDDLE

2-20-03

CK.

LTR DATE DESCRIPTION OF CHANGE DR

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.

NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

STAR MANUFACTURING INTERNATIONAL INC.

#10 SUNNEN DRIVE, ST. LOUIS, MO. 63143, USA

NOMINAL AMPS PER LINE

208V-3 PHASE

9,012 WATTS

25.0

AWG #12

Y Z

240V-3PHASE

12,000 WATTS

X Y Z

AWG #10

28.925.025.0 28.9 28.9

240V SINGLE PHASE

12,000 WATTS

X-Y

AWG #6

208V SINGLE PHASE

9,012 WATTS

X-Y

43.3

AWG #6

4-5-13

ADDED SINGLE PHASE INFORMATION

PILOT LIGHT

THERMOSTAT

HEATING ELEMENT

THREE PHASE

SINGLE PHASE

NOTE:

1) FOR SUPPLY CONNECTIONS USE COPPER WIRE ONLY, SUITABLE FOR AT

LEAST 90°C (194°F). USE GAUGE SHOWN OR LARGER.

2) ALL INTERNAL WIRING IS #14 GA.

MATERIAL

DR.

DATE

FINISH

MODEL NO.

TITLE

PART NO.

TOLERANCES UNLESS OTHERWISE NOTED

FRACTIONS ±1/64 DECIMALS ±.005 ANGLES ±1°

REVISIONS

548TGD

SK1928

WIRING DIAGRAM 48" ELEC. GRIDDLE

2-20-03

CK.

LTR DATE DESCRIPTION OF CHANGE DR

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.

NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

STAR MANUFACTURING INTERNATIONAL INC.

#10 SUNNEN DRIVE, ST. LOUIS, MO. 63143, USA

THREE PHASE PARALLEL SUPPLY

208

12,016

38.2

AWG

Y Z

240

16,000

X Y Z

AWG

44.22538.2 44.2 29

AWG AWG

#8 #6

AWG

NOMINAL AMPS PER LINE

#10 #8

28.88

AWG

33.3

AWG

208 240

FOR SUPPLY USE

SINGLE PHASE DUAL SUPPLY

WIRE SIZE SHOWN OR LARGER

X-Y X-Y

80006,008

RATED WATTAGE

VOLTAGE

PHASE

#10

AWG

28.88

X-Y

6,008

X-Y

AWG

33.3

8000

3/6/2012

CORRECTED SINGLE PHASE BALLOONS

FROM Z TO Y

JGL

SINGLE PHASE

CONNECTION

2 2

THERMOSTAT

2 2

1 1

PILOT

LIGHT

HEATING ELEMENT

FRAME

GROUND

3 PHASE

CONNECTION

X Y

SINGLE PHASE

CONNECTION

FRAME

GROUND

3 PHASE

CONNECTION

NOTE:

1) FOR SUPPLY CONNECTIONS USE COPPER WIRE

ONLY, SUITABLE FOR AT LEAST 90°C (194°F).

USE WIRE GAUGE SHOWN OR LARGER.

2) ALL INTERNAL WIRING IS #14 GA.

2M-Z16009 Star-Max Electric Griddle

#10 SUNNEN DRIVE, ST. LOUIS, MO. 63143, USA

MATERIAL

DR.

DATE

FINISH

MODEL NO.

TITLE

PART NO.

TOLERANCES UNLESS OTHERWISE NOTED

FRACTIONS ±1/64 DECIMALS ±.005 ANGLES ±1°

REVISIONS

536TGD 220/230V SK2204

WIRING DIAGRAM 3 PHASE 5 WIRE

6-9-06

CK.

LTR DATE DESCRIPTION OF CHANGE DR

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.

NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

STAR MANUFACTURING INTERNATIONAL INC.

NOMINAL AMPS PER LINE

220/380V Y

10083 WATTS

15.3

Y Z

230/400V Y

11020 WATTS

X Y Z

1615.315.3 16 16

N N

15.3 16

PILOT LIGHT

THERMOSTAT

HEATING ELEMENT

LINE 1

LINE 2

LINE 3

NEUTRAL

CHASSIS GROUND

FOR SUPPLY CONNECTIONS USE

COPPER WIRE ONLY, SUITABLE

FOR AT LEAST 90°C (194°F). #10

AWG OR LARGER.

DO NOT CONNECT TO AN ELECTRICAL SYSTEM

OPERATING AT MORE THAN 240 VOLTS TO GROUND

MATERIAL

DR.

DATE

FINISH

MODEL NO.

TITLE

PART NO.

TOLERANCES UNLESS OTHERWISE NOTED

FRACTIONS ±1/64 DECIMALS ±.005 ANGLES ±1°

REVISIONS

536TGF-PE

SK2624

WIRING DIAGRAM 536TGF-PE

10-23-12

CK.

LTR DATE DESCRIPTION OF CHANGE DR

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.

NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

STAR MANUFACTURING INTERNATIONAL INC.

#10 SUNNEN DRIVE, ST. LOUIS, MO. 63143, USA

NOMINAL AMPS PER LINE

208V-3 PHASE

9,012 WATTS

25.0

AWG

#12

Y Z

240V-3PHASE

12,000 WATTS

X Y Z

#10

AWG

28.925.025.0 28.9 28.9

PILOT LIGHT

THERMOSTAT

HEATING ELEMENT

NOTE:

1) FOR SUPPLY CONNECTIONS USE COPPER WIRE ONLY, SUITABLE FOR AT

LEAST 90°C (194°F). USE GAUGE SHOWN OR LARGER.

2) ALL INTERNAL WIRING IS #14 GA.

2M-Z16009 Star-Max Electric Griddle

STAR MANUFACTURING INTERNATIONAL, INC.

MODEL - 524TGF, 524CHSF

CERTAIN INSTANCES MAY NOT BE AVAILABLE

ILLUSTRATIVE PURPOSES ONLY AND IN

SOME ITEMS ARE INCLUDED FOR

SK2597 REV. B 9/01/15

2M-Z16009 Star-Max Electric Griddle

PARTS LIST September 1, 2015, Rev. D

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE 1

INCLUDE MODEL AND SERIAL NUMBER OF 2

Some items are included for illustrative purposes only and in certain instances may not be available.

Star Manufacturing International, Inc.

Model: 515TGD, 524TGF, 536TGF and 548TGF Star-Max/Chrome-Max Electric Griddles

Fig No Part No. Qty Description Application

G3-515311

GRIDDLE PLATE STUDDED 515TGF

G3-524313 GRIDDLE PLATE STUDDED 524CHSF

G3-524314 GRIDDLE PLATE STUDDED 524TGF

G3-524315 DIVIDED PLATE ASSEMBLY 524TGF-DIV

G3-536313 GRIDDLE PLATE STUDDED 536TGF

G3-536315 GRIDDLE PLATE ASSY 536DIV 536TGF-DIV

G3-536316 GRIDDLE PLATE ASSY WELDED 536TGF-PE

G3-536314 GRIDDLE PLATE STUDDED 536CHSF

G3-548312 GRIDDLE PLATE STUDDED 548TGF

G3-548313 GRIDDLE PLATE STUDDED 548CHSF

2 2N-Z5948 1/2/3/4 HEATING ELEMENT

3 G3-Z5973 2/4/6/8 ELEMENT CLAMP SHORT

4 G3-Z16135 6/12/18/24 HEATER ELEMENT CLAMP SM

5 2C-6517 8/16/24/32 NUT 1/4-20 HEX STL NP

G3-615304

1 CHUTE ASSEMBLY

515

G3-624304 524 / 536 / 548

7 2C-Z2893 4 NUT 10-24 HEX STL

G3-Y7788

BOX COVER

515 / 524 / 536

2 548

H1-Z9843 1 CONNECTION BOX COVER 536TGF-230V

G3-Z19326 1 COVER - CONNECTION BOX 536TGF-PE

9 2C-Y2295 1 / 2 SCREW 10X3/8 STL HEX GREEN 515, 524, 536 / 548

10 2C-Y2344

GROUND LUG

515 / 524 / 536

2 548

11 2C-1512

2 / 4

SCREW 10-24X3/8 RHP STL

515, 524, 536 / 548

14 536TGF-PE

2E-Y7327

ELECTRICAL BOX

515 / 524 / 536

2 548

H1-Z9842 1 SUPPLY CONNECTION BOX 536TGF-230V

G3-Z19325 1 BOX - SUPPLY CONNECTION 536TGF-PE

13 2K-Z6183

BUSHING

515 / 524 / 536

6 548

G3-Z5950

REAR PANEL

515

G3-Z5952 524

G3-Z5954 536

G3-Z5956 548

G3-Z9848 536TGF-230V

G3-Z19324 REAR PANEL 536TGF-PE 536TGF-PE

15 2C-8833 Various SCREW 8-18X1/2 HEX STL NP ALL

16 G3-Z5945 2 SIDE PANEL ALL

17 G3-624302 1 SIDE LINER ASSEMBLY LEFT ALL

G3-Z5993

1 BOTTOM PANEL

515

G3-Z5994 524

G3-Z5995 536

G3-Z5996 548

PARTS LIST September 1, 2015, Rev. D

STAR MANUFACTURING INTERNATIONAL INC.

Star - Holman - Lang - Wells - Toastmaster

265 HOBSON ST. SMITHVILLE, TN 37166

(800) 264-7827

www.star-mfg.com

Model: 515TGD, 524TGF, 536TGF and 548TGF Star-Max/Chrome-Max Electric Griddles

Fig No Part No. Qty Description Application

19 G3-624303 1 SIDE LINER ASSEMBLY RIGHT ALL

20 2A-Z5942 4 FOOT ALL

G3-Z5905

1 CENTER WALL

515

G3-Z5915 524

G3-Z5925 536

G3-Z5935 548

G3-Z5997

1 FRONT BOTTOM PANEL

515

G3-Z5998 524

G3-Z5999 536

G3-Z6001 548

23 G3-Y7046 1 GREASE DRAWER ALL

24 G3-Z6036 2 DRAWER SLIDE ALL

25 2T-Z5958 1/2/3/4 THERMOSTAT ALL

26 2C-Z8547 AR BOLT, KNOB STOP ALL

2M-Z15451 1/2/3/4 LABEL ELECT T-STAT LG 515 / 524 / 536/ 548

2M-Z18125 3 LABEL - KNOB 536TGF-PE

28 G3-624329 1/2/3/4 KNOB ASSY LG E-T KEYR 515 / 524 / 536/ 548

29 2J-Y6690 1/2/3/4 PILOT LIGHT 515 / 524 / 536 / 548

30 2M-Z15804 1 STAR-MAX LOGO ALL

G3-Z15793

FRONT PANEL

515

G3-Z15794 524

G3-Z15795 536

G3-Z15709 FRONT PANEL 5136 536TGF-230V

G3-Z19764 FRONT PANEL w/KNOB GUARD HOLES 536TGF-PE

G3-Z15796 FRONT PANEL 548

32 2C-8477 3 CLIP .125 PO STL PHOS ALL

33 G3-Z5947 1/2/3/4 COVER 515 / 524 / 536 / 548

34 PS-524318 KNOB GUARD KIT OPTIONAL ACCESSORY

35 2A-Z13272 6 KNOB GUARD 536TGF-PE

36 2R-Z8892 3 KNOB, THERM. ELEC. S-MAX, PLASTIC 536TGF-PE

37 2C-200067 6 SCREW 6-32X1/4 THP SS 536TGF-PE

38 G3-Z19058 3 KNOB STOP BRACKET 536TGF-PE

39 2C-200177 12 WASHER #10 EXT STL ZP 536TGF-PE

NI 2E-Z5969 1 WIRE SET 515

NI 2E-Z5970 1/2 WIRE SET 524 / 548

NI 2E-Z5971 1 WIRE SET 536

NI 2E-Z19258 1 CORD SET 8/4 50 AMP LOCK 536TGF-PE

Star 524TGF Owner's manual

Related papers

Other documents