Ohlins FGHO1093 Mounting Instruction

Öhlins Front Fork Kit for Honda CRF 250 R

FGHO 1093

Application Speciﬁc Mounting Instructions

Issued 2009-11-26

Kit Contents (application speciﬁc)

Recommended Tools (application speciﬁc)

Hydraulic Stop Cup

Set-Up Data

Spring Recommendation

Part No. Pcs.

Front Fork kit FGHO 1093 1

Base plug (with o-rings) 15430-09 2

Spacer 2 mm 15443-02 10

Hydraulic Stop Cup N/A N/A

Spring Support washer N/A N/A

OEM Fork Cap Tool 50 mm, octagon

Socket for OEM Base Plug 21 mm

Socket for Öhlins Base Plug 21 mm

FGHO 1093 CArtridge kit uses STD/OEM Hydraulic stop cup.

Rebound Damping 15 clicks

Compression Damping 15 clicks

Spring Preload 0 mm

Fluid Volume (each leg) 0,350 litre

Cartridge Kit FGHO 1093 shall be used together with

Öhlins Front Fork Springs part no. 08763-xx. For rate

recommendations, see Owner’s Manual/ General Mounting

Instructions.

Note!

The fork springs need to be ordered separately depending on the

rider’s choice of spring rate.

Part No. Pcs.

Circlip 15440-01 2

Öhlins Sticker 00197-01 2

TTX Cartridge Sticker 00191-29 2

Spring preload range -2 to 8 mm

(can be adjusted by adding/removing washers 15443-02)

Fluid volume range (each leg) 0,300 - 0,400 litre

Öhlins Front Fork uid 01312-01