Page is loading ...
Installing the ADN Cable Calculator
1|Installation Cable Calculator
Installing the ADN Cable Calculator
System requirements
Installing the ADN Cable Calculator
To install the software, you require administrator rights.
왘 Close all running applications.
왘 Start the “ADNCableCalcSetup.exe” file in the “ADN Cable Calculator” folder on
the enclosed DVD-ROM.
After you have accepted the license agreement, a confirmation prompt
appears:
Component Requirement
PC Standard PC with x86-CPU
Operating system Microsoft Windows XP
Microsoft Windows Vista
Microsoft Windows 7
Microsoft Windows 8
The following steps describe the installation of the “ADN Cable Calculator”
software on a PC running Windows 8. The installation on a PC running
Windows XP, Windows Vista or Windows 7 is performed in a similar way.
Installation Cable Calculator |2
Installing the ADN Cable Calculator
왘 Click the “Next” button.
A selection window for specifying the installation location appears:
왘 Use the default or select an installation path.
왘 Click the “Next” button.
A summary of the selected installation settings is displayed:
왘 Confirm this summary by clicking the “Next” button.
The installation is performed and a confirmation appears:
왘 Click the “Close” button.
The software has been successfully installed.
Uninstalling the ADN Cable Calculator
3|Installation Cable Calculator
Uninstalling the ADN Cable Calculator
You can uninstall the “ADN Cable Calculator” software using the installation wizard
on the DVD-ROM or using the Windows Control Panel (category “Add or Remove
Programs”, entry “ADN Cable Calculator”).
If you use the installation wizard to uninstall the software, the wizard automati-
cally starts in repair mode:
왘 Start the “ADNCableCalcSetup.exe” file in the “ADN Cable Calculator” folder on
the enclosed DVD-ROM.
왘 Select “Remove ADN Cable Calculator”.
왘 Click the “Finish” button.
The software is uninstalled.
/
