Zoom Gear for Nikon 16-80mm Lens
Product Number - 5509.16
Included in the Box
• Port Gear Sleeve # 0073.6
• Zoom Clamp # 9059.9
Installation and Use
Attaching the Sleeve and Clamp to a DL Housing
1. Place Zoom Gear into the housing Port Mount opening,
with gear slots facing up.
2. Mesh Zoom Gear teeth with small black housing gear.
3. Tighten Zoom Gear Retainer into Port Mount using Zoom
Gear Retainer Tool. Tighten clockwise so Retainer is snug
- Diagram A. DO NOT overtighten.
4. Line up the two white dots on the camera face and lens,
and bayonet the lens into the camera body by rotating the
lens counterclockwise - Diagram B.
5. Gently expand and place the Clamp over the front of the
lens.
6. Line up Zoom Clamp tabs with Zoom Gear slots.
7. Push clamp down on the lens until the tabs slide into the
slots.
8. Check zoom function.
9. Install Lens Port.
Limited Warranty
This Ikelite product is warranted against any manufacturing
defects for a period of one (1) year from the original date
of purchase. To obtain warranty service, the product must
be returned to Ikelite postage paid. Ikelite will, at its sole
discretion, repair or replace such products, and will return
to customer postage paid. All other claims of any nature are
not covered. Except as mentioned above, no other warranty
expressed or implied applies to this Ikelite product.
Diagram A
Diagram B
Zoom Clamp Tab
Zoom Gear Slot
Zoom Gear
Port Mount
Zoom Gear Retainer Tool
Zoom Gear
Retainer
5509.16_Zoom_Gear_for_Nikon_16-80mm_1-0517
-
1
Ikelite Zoom / Focus Gear 5509.16 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Ikelite 200DL Underwater Housing for Panasonic Lumix DC-G9 Micro Four-Thirds Mirrorless Cameras User manual
-
-
-
-
-
-
-
-
-