LG 42LV3500 Owner's manual

www.lg.com

P/NO : SAC34134216 (1102-REV08)

OWNER’S MANUAL

LED LCD TV / LCD TV /

PLASMA TV

Please read this manual carefully before operating the

set and retain it for future reference.

LED LCD TV MODELS

19LV2500

22LV2500

26LV2500

32LV2500

19LV2520

22LV2520

26LV2520

32LV2520

LCD TV MODELS

26LK330

32LK330

32LK430

42LK430

PLASMA TV MODELS

42PW340

50PW340

42PW350

50PW350

50PZ200

60PZ200

32LV3500

37LV3500

42LV3500

47LV3500

55LV3500

32LV3520

42LV3520

32LK450

37LK450

42LK450

47LK450

42LK520

47LK520

55LK520

42PW350U

50PW350U

42PW350R

50PW350R

2

ENG

ENGLISH

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D

symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is

an official DivX Certified® device that plays DivX video. Visit www.divx.com for

more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered

in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your

registration code, locate the DivX VOD section in your device setup menu. Go to

vod.divx.com for more information on how to complete your registration.

“DivX Certified® to play DivX® video up to HD 1080p, including premium

content.”

“DivX®, DivX Certified® and associated logos are registered trademarks of DivX,

Inc. and are used under license.”

“Covered by one or more of the following U.S. patents:

7,295,673; 7,460,668; 7,515,710; 7,519,274”

NOTE

y

Plasma

: Plasma TV

LCD

: LED LCD TV, LCD TV

y

Image shown may differ from your TV.

y

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

3

ENG

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance

of your product.

TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR

BACK). NO USER SERVICEABLE PARTS

INSIDE. REFER TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert the user to the

presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be

of sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the literature accompanying

the appliance.

- TO REDUCE THE RISK OF FIRE AND

ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

WARNING/CAUTION

Read these instructions.

Keep these instructions.

Heed all warning.

Follow all instruction.

y

Do not use this apparatus near water.

y

Clean only with dry cloth.

y

Do not block any ventilation openings. Install

in accordance with the manufacturer’s

instructions.

y

Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

y

Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding-type plug has two blades

and a third grounding prong. The wide blade

or the third prong are provided for your safety.

If the provided plug does not fit into your

outlet, consult an electrician for replacement

of the obsolete outlet. (Can differ by country)

4

ENG

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

y

Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

y

Only use attachments/accessories specified

by the manufacturer.

y

Use only with a cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

y

Unplug this apparatus during lightning

storms or when unused for long periods of

time.

y

Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

y

Never touch this apparatus or antenna during

a thunder or lightning storm.

y

When mounting a TV on the wall, make sure

not to install the TV by hanging the power

and signal cables on the back of the TV.

y

Do not allow an impact shock or any objects

to fall into the product, and do not drop

anything onto the screen.

y

CAUTION concerning the Power Cord:

It is recommended that appliances be

placed upon a dedicated circuit; that is, a

single outlet circuit which powers only that

appliance and has no additional outlets or

branch circuits. Check the specification page

of this owner’s manual to be certain. Do not

connect too many appliances to the same

AC power outlet as this could result in fire or

electric shock. Do not overload wall outlets.

Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power

cords, or damaged or cracked wire insulation

are dangerous. Any of these conditions could

result in electric shock or fire. Periodically

examine the cord of your appliance, and

if its appearance indicates damage or

deterioration, unplug it, discontinue use of

the appliance, and have the cord replaced

with an exact replacement part by an

authorized service. Protect the power cord

from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a

door, or walked upon. Pay particular attention

to plugs, wall outlets, and the point where

the cord exits the appliance. Do not move

the TV with the power cord plugged in. Do

not use a damaged or loose power cord. Be

sure do grasp the plug when unplugging the

power cord. Do not pull on the power cord

to unplug the TV.

y

Warning

- To reduce the risk of fire or

electrical shock, do not expose this product

to rain, moisture or other liquids. Do not

touch the TV with wet hands. Do not install

this product near flammable objects such

as gasoline or candles, or expose the TV to

direct air conditioning.

5

ENG

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

y

Do not expose to dripping or splashing and

do not place objects filled with liquids, such

as vases, cups, etc. on or over the apparatus

(e.g. on shelves above the unit).

y

Grounding

Ensure that you connect the earth ground

wire to prevent possible electric shock

(i.e. a TV with a three-prong grounded AC

plug must be connected to a three-prong

grounded AC outlet). If grounding methods

are not possible, have a qualified electrician

install a separate circuit breaker. Do not try to

ground the unit by connecting it to telephone

wires, lightening rods, or gas pipes.

Power Supply

Short-circuit Breaker

y

DISCONNECTING DEVICE FROM THE MAIN

POWER

The power outlet must remain readily

accessed in the event the device needs to

be unplugged.

y

As long as this unit is connected to the AC

wall outlet, it is not disconnected from the

AC power source even if the unit is turned

off.

y

Do not attempt to modify this product in any

way without written authorization from LG

Electronics. Unauthorized modification could

void the user’s authority to operate this

product.

y

ANTENNAS Outdoor antenna grounding

(Can differ by country):

If an outdoor antenna is installed, follow

the precautions below. An outdoor antenna

system should not be located in the vicinity

of overhead power lines or other electric light

or power circuits, or where it can come in

contact with such power lines or circuits as

death or serious injury can occur. Be sure the

antenna system is grounded so as to provide

some protection against voltage surges

and built-up static charges. Section 810 of

the National Electrical Code (NEC) in the

U.S.A. provides information with respect to

proper grounding of the mast and supporting

structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding

conductors, location of antenna discharge

unit, connection to grounding electrodes and

requirements for the grounding electrode.

Antenna grounding according to the National

Electrical Code, ANSI/NFPA 70

NEC: National Electrical Code

Ground Clamp

Antenna Lead in Wire

Antenna Discharge Unit

(NEC Section 810-20)

Grounding Conductor

(NEC Section 810-21)

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

Electric Service

Equipment

Ground Clamp

y

Cleaning

When cleaning, unplug the power cord and

wipe gently with a soft cloth to prevent

scratching. Do not spray water or other

liquids directly on the TV as electric shock

may occur. Do not clean with chemicals

such as alcohol, thinners or benzine.

y

Moving

Make sure the product is turned off,

unplugged and all cables have been

removed. It may take 2 or more people to

carry larger TVs. Do not press or put stress

on the front panel of the TV.

y

Ventilation

Install your TV where there is proper

ventilation. Do not install in a confined

space such as a bookcase. Do not cover the

product with cloth or other materials while

plugged. Do not install in excessively dusty

places.

y

If you smell smoke or other odors coming

from the TV, unplug the power cord contact

an authorized service center.

y

Do not press strongly upon the panel with

hand or sharp object such as nail, pencil or

pen, or make a scratch on it.

y

Keep the product away from direct sunlight.

6

ENG

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

y

Dot Defect

The Plasma or LCD panel is a high

technology product with resolution of two

million to six million pixels. In a very few

cases, you could see fine dots on the screen

while you’re viewing the TV. Those dots

are deactivated pixels and do not affect the

performance and reliability of the TV.

y

Generated Sound

“Cracking” noise: A cracking noise that

occurs when watching or turning off the TV

is generated by plastic thermal contraction

due to temperature and humidity. This noise

is common for products where thermal

deformation is required.

Electrical circuit humming/panel buzzing: A

low level noise is generated from a high-

speed switching circuit, which supplies a

large amount of current to operate a product.

It varies depending on the product.

This generated sound does not affect the

performance and reliability of the product.

y

Take care not to touch the ventilation

openings. When watching the TV for a long

period, the ventilation openings may become

hot. This does not affect the performance of

the product or cause defects in the product.

y

Viewing 3D Imaging (For 3D TV)

- When viewing 3D imaging, watch the TV

from an effective viewing angle and within

the appropriate distance. If you exceed this

viewing angle or distance, you may not be

able to view the 3D imaging. Furthermore,

the 3D imaging may not display if it is viewed

while you are lying down.

- If you watch the 3D imaging too closely or

for a long period of time, it may harm your

eyesight.

- Watching the TV or playing video games

that incorporate 3D imaging with the 3D

glasses for a long period of time can cause

drowsiness, headaches or fatigue to you

and/or your eyes. If you have a headache,

or otherwise feel fatigued or drowsy, stop

watching the TV and take a rest.

- Pregnant woman, seniors, persons with

heart problems or persons who experience

frequent drowsiness should refrain from

watching 3D TV.

- Some 3D imaging may cause you to duck

or dodge the image displayed in the video.

Therefore, it is best if you do not watch 3D

TV near fragile objects or near any objects

that can be knocked over easily.

- Please prevent children under the age of

5 from watching 3D TV. It may affect their

vision development.

- Warning for photosensitization seizure: Some

viewers may experience a seizure or epilepsy

when exposed to certain factors, including

flashing lights or images in TV or video

games. If you or anybody from your family

has a history of epilepsy or seizure, please

consult with your doctor before watching 3D

TV.

Also certain symptoms can occur in

unspecified conditions without any previous

history. If you experience any of the following

symptoms, immediately stop watching the

3D imaging and consult a doctor: dizziness or

lightheadedness, visual transition or altered

vision, visual or facial instability, such as eye

or muscle twitching, unconscious action,

convulsion, loss of conscience, confusion

or disorientation, loss of directional sense,

cramps, or nausea. Parents should monitor

their children, including teenagers, for these

symptoms as they may be more sensitive to

the effects of watching 3D TV.

Risk of photosensitization seizure can be

reduced with the following actions.

- Take frequent breaks from watching 3D TV.

- For those who have vision that is different

in each eye, they should watch the TV after

taking vision correction measures.

- Watch the TV so that your eyes are on the

same level as the 3D screen and refrain from

sitting too closely to the TV.

- Do not watch the 3D imaging when tired or

sick, and avoid watching the 3D imaging for a

long period of time.

- Do not wear the 3D glasses for any other

purpose than viewing 3D imaging on a 3D TV.

- Some viewers may feel disoriented after

watching 3D TV. Therefore, after you watch

3D TV, take a moment to regain awareness

of your situation before moving.

7

ENG

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

y

LCD

If the TV feels cold to the touch, there may

be a small “flicker” when it is turned on. This

is normal, there is nothing wrong with TV.

Some minute dot defects may be visible on

the screen, appearing as tiny red, green, or

blue spots. However, they have no adverse

effect on the TV’s performance. Avoid

touching the LCD screen or holding your

finger(s) against it for long periods of time.

Doing so may produce some temporary

distortion effects on the screen.

DISPOSAL (Hg lamp only used in LCD TVs)

The fluorescent lamp used in this product contains

a small amount of mercury. Do not dispose of

this product with general household waste.

Disposal of this product must be carried out

in accordance to the regulations of your local

authority.

For USA and Canada

FCC NOTICE

This equipment has been tested and found

to comply with the limits for a Class B

digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur

in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the

equipment and the receiver.

- Connect the equipment to an outlet on

a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/

TV technician for help.

This device complies with part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) this device may not cause

harmful interference and (2) this device must

accept any interference received, including

interference that may cause undesired

operation of the device.

Any changes or modifications in construction of

this device which are not expressly approved

by the party responsible for compliance

could void the user’s authority to operate the

equipment.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV

system installer’s attention to Article 820-40 of

the National Electric Code (U.S.A.). The code

provides guidelines for proper grounding and,

in particular, specifies that the cable ground

shall be connected to the grounding system of

the building, as close to the point of the cable

entry as practical.

8

ENG

ENGLISH

TABLE OF CONTENTS

2 LICENSES

3 IMPORTANT SAFETY IN-

STRUCTIONS

8 TABLE OF CONTENTS

10 ASSEMBLING AND PREPARING

10 Unpacking

14 Optional Extras

15 Parts and buttons

23 Lifting and moving the TV

23 Setting up the TV

23 - Attaching the stand

28 - Mounting on a table

30 - Mounting on a wall

31 - Tidying cables

32 REMOTE CONTROL

36 WATCHING TV

36 Connecting to an antenna or cable

36 - Connecting an antenna or basic cable

36 - Connecting a cable box

37 Connecting to the AC/DC adapter

37 Turning the TV on for the first time

38 Watching TV

38 Managing channels

38 - Setting up channels

39 - Using favorite channels

40 - Checking current program info

42 Using additional options

42 - Adjusting aspect ratio

43 - Changing AV modes

43 - Using the input list

44 - Locking the buttons on the TV (Child

Lock)

44 Using the quick menu

45 Using the customer support

45 - Testing the Picture / Sound

45 - Using the product or service informa-

tion

46 3D IMAGING (FOR 3D TV)

46 3D Technology

47 - When using 3D Glasses

47 - 3D Imaging Viewing Range

48 Viewing 3D Imaging

50 ENTERTAINMENT

50 - Connecting USB storage devices

51 - Browsing files

53 - Viewing Videos

56 - DivX registration code

57 - Viewing Photos

59 - Listening to music

61 CUSTOMIZING TV SETTINGS

61 The Main Menus

62 Customizing Settings

62 - CHANNEL Settings

63 - PICTURE Settings

67 - AUDIO Settings

68 - TIME Settings

69 - LOCK Settings

71 - OPTION Settings

73 MAKING CONNECTIONS

74 Connection Overview

75 Connecting to a HD receiver, DVD, or

VCR player

75 - HDMI Connection

75 - DVI to HDMI Connection

76 - Component Connection

76 - Composite Connection

9

ENG

ENGLISH

TABLE OF CONTENTS

77 Connecting to a PC

77 - HDMI Connection

77 - DVI to HDMI Connection

78 - RGB Connection

79 Connecting to an Audio System

79 - Digital optical audio connection

79 Connecting to a USB

79 Connecting to a Headphone (

LCD

)

80 SIMPLINK Connection

80 - Activating and Using the SIMPLINK

menus

81 MAINTENANCE

81 Cleaning Your TV

81 - Screen and frame

81 - Cabinet and stand

81 - Power cord

81 Preventing “Image burn” or “Burn-in” on

your TV screen

82 TROUBLESHOOTING

84 SPECIFICATIONS

90 IR CODES

92 EXTERNAL CONTROL DEVICE

SETUP

100 OPEN SOURCE LICENSE

10

ENG

ENGLISH

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual

product and item.

Remote control and batteries (AAA) Owner’s manual CD manual

Polishing cloth

1

(Depending on model)

FREEZE

RATIO

L/R SELECT

ENTER

BACK

EXIT

Q.MENU

INFO

MENU

CHVOL

P

A

G

E

FAV

3D

MUTE

1 2 3

4 5 6

7 8

0

9

MARK

LIST

FLASHBK

ENERGY

SAVING

TV

AV MODE

INPUT

1 Gently wipe the spots on the cabinet with the polishing cloth.

11

ENG

ENGLISH

ASSEMBLING AND PREPARING

32LV2500, 32LV2520, LV3500, LV3520 series

Screw for assembly Composite gender cable Cable holder Screw for fixing

M4 x 14

x 8

(For 32LV2500, 32LV2520,

32/37LV3500, 32LV3520)

M4 x 12

x 8

(32LV2500,

32LV2520)

(LV3500,

LV3520 series)

19/22/26LV2500, LV2520 series

Screw for assembly Cable holder Power Cord

AC/DC Adapter

M4 x 16

x 2

M4 x 6

PW340, PW350, PW350U, PW350R, PZ200 series

Screw for assembly Cable holder Power Cord holder

Power Cord Protection cover Ferrite core

(Depending on model)

Protection cover tape

M4 x 26 M5 x 14.5

M4 x 28 M5 x 24

(For 60PZ200)

(Other models)

x 4 x 3

x 2

12

ENG

ENGLISH

ASSEMBLING AND PREPARING

CAUTION

y

Do not use any unapproved items to ensure the safety and product life span.

y

Any damages or injuries by using unapproved items are not covered by the warranty.

LK330, LK430, LK450, LK520 series

Screw for assembly Screw for fixing Protection cover Power Cord

M4 x 20

x 8

(Except 47LK450,

47/55LK520)

13

ENG

ENGLISH

ASSEMBLING AND PREPARING

NOTE

y

The items supplied with your product may vary depending on the model.

y

Product specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions.

y

(

Plasma

)

How to use the ferrite core

1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.

Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.

[to an External device]

10 mm (+/-5 mm)

[to the TV]

2 Use the ferrite core to reduce the electromagnetic interference in the power cable.

Wind the power cable on the ferrite core once. Place the ferrite core close to the TV.

[to a wall plug] [to the TV]

3 Use the ferrite core to reduce the electromagnetic interference in the power cable.

Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall

plug.

[to a wall plug] [to the TV]

- If there is one ferrite core, follow as shown in Figure 1.

- If there are two ferrite cores, follow as shown in Figures 1 and 2.

- If there are three ferrite cores, follow as shown in Figures 1 and 3.

y

(

LCD

) For an optimal connection, HDMI cables and USB devices should have bezels less than 10

mm (0.39 inches) thick and 18 mm (0.7 inches) width.

B

A

B

*A 10 mm (0.39 inches)

*B

18 mm (0.7 inches)

[Cross Section of

Ferrite Core]

[Figure 1]

[Cross Section of

Ferrite Core]

[Figure 2]

[Cross Section of

Ferrite Core]

[Figure 3]

14

ENG

ENGLISH

ASSEMBLING AND PREPARING

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification.

Contact your dealer for buying these items.

This device only works with compatible LG Plasma TV.

3D Glasses

(AG-S230, AG-S250, AG-S270)

D-sub 15 pin signal cable

1

1 When using the VGA (D-sub 15 pin signal cable) PC connection, use the shielded signal interface cable

with a ferrite core to maintain standards compliance for the product.

15

ENG

ENGLISH

ASSEMBLING AND PREPARING

Parts and buttons

Touch button

2

Description

/

I

Turns the power on or off.

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER



Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

v

CH

^

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.

PW340, PW350, PW350U, PW350R, PZ200 series

AV IN 2

L/MONO

R

AUDIO

VIDEO

USB ININ 3

COMPONENT IN

VIDEO

AUDIO

Y

L

P

B

PR

R

RGB IN (PC)

AUDIO IN

(RGB/DVI)

ANTENNA

/CABLE

IN

RS-232C IN

(CONTROL & SERVICE)

REMOTE

CONTROL IN

OPTICAL

DIGITAL

AUDIO OUT

AV IN 1

1

/DVI IN

VIDEO

AUDIO

L/MONO

R

2

1

2

ENTER

CH

VOL

HOME

INPUT

Remote control and

intelligent

1

sensors

USB input

HDMI input

AV (Audio

and Video)

input

Screen

Speakers

Rear Connection panel

(See p.73)

Touch buttons

2

Side Connection panel

16

ENG

ENGLISH

ASSEMBLING AND PREPARING

32LV2500, 32LV2520, LV3500, LV3520 series

NOTE

y

You can set the power indicator light to on or off by selecting

OPTION

in the main menus.

Touch button

2

Description

/

I

Turns the power on or off.

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER



Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

v

CH

^

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.

IN 3

USB IN

LAN

OPTICAL DIGITAL

AUDIO OUT

ANTENNA/

CABLE IN

ENTER

CH

VOL

HOME

INPUT

AV IN 2

VIDEO / AUDIO

H/P

ANTENNA /

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

RGB IN

(PC)

(RGB/DVI)

AUDIO IN

OPTICAL

DIGITAL

AUDIO OUT

1

2

VIDEO

AUDIO

COMPONENT IN

Y

P

B

P

R

L

VIDEO

AUDIO

L/MONO

R

AV IN 1

/ DVI IN

2 1

USB IN

IN 3

Screen

Touch buttons

2

Power indicator

Remote control and

intelligent

1

sensors

Rear Connection panel

(See p.73)

Speakers

17

ENG

ENGLISH

ASSEMBLING AND PREPARING

19/22/26LV2500, LV2520 series

Touch button

2

Description

/

I

Turns the power on or off.

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER



Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

v

CH

^

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.

USB IN

VIDEO

AUDIO

COMPONENT IN

Y

P

B

P

R

L

(RGB/DVI)

AUDIO IN

OPTICAL

DIGITAL

AUDIO OUT

RS-232C IN

(

CONTROL & SERVICE)

RGB IN (PC)

/ DVI IN

2

1

VIDEO

AUDIO

R

AV IN

L/MONO

DC-IN

ENTER

CH

VOL

HOME

INPUT

ANTENNA /

CABLE IN

IN 3

Screen

Touch buttons

2

Power indicator

Remote control and

intelligent

1

sensors

Rear Connection panel

(See p.73)

Speakers

USB input

Headphone

output

Side Connection panel

NOTE

y

You can set the power indicator light to on or off by selecting

OPTION

in the main menus.

HDMI input

18

ENG

ENGLISH

ASSEMBLING AND PREPARING

LK450 series

Touch button

2

Description

/

I

Turns the power on or off.

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER



Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

v

CH

^

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.

ENTER

CH

VOL

HOME

INPUT

USB IN

VIDEO

AUDIO

R

L/MONO

IN 3

AV IN 2

1

2

COMPONENT IN

Y

PB

P

R

L

VIDEO

AUDIO

R

AV IN 1

L/MONO

ANTENNA /

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

RGB IN (PC)

OPTICAL DIGITAL

AUDIO OUT

(RGB/DVI)

AUDIO IN

/ DVI IN

2

1

VIDEO

AUDIO

32/37/42/47LK450-UB Rear AV

32/37/42/47LK450-UB Side AV

Screen

Touch buttons

2

Power indicator

Remote control and

intelligent

1

sensors

Rear Connection panel

(See p.73)

Speakers

USB input

HDMI input

Headphone

output

AV (Audio

and Video)

input

Side Connection panel

NOTE

y

You can set the power indicator light to on or off by selecting

OPTION

in the main menus.

19

ENG

ENGLISH

ASSEMBLING AND PREPARING

INPUT

HOME

ENTER

CH

VOL

COMPONENT

IN

Y

PB

P

R

L

VIDEO

AUDIO

R

AV IN 1

L/MONO

ANTENNA /

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

RGB IN (PC)

OPTICAL DIGITAL

AUDIO OUT

AUDIO IN

(RGB/DVI)

/ DVI IN

2

1

VIDEO

AUDIO

USB IN

VIDEO

AUDIO

R

L/MONO

IN 3

AV IN 2

26LK330

Button

2

Description

/

I

Turns the power on or off.

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER



Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

v

CH

^

Scrolls through the saved channels.

USB input

HDMI input

Headphone

output

AV (Audio

and Video)

input

Side Connection panel

Screen

Speakers

Power indicator

Remote control

Rear Connection panel

(See p.73)

Buttons

2

NOTE

y

You can set the power indicator light to on or off by selecting

OPTION

in the main menus.

20

ENG

ENGLISH

ASSEMBLING AND PREPARING

INPUT

HOME

ENTER

CH

VOL

COMPONENT

IN

Y

PB

P

R

L

VIDEO

AUDIO

R

AV IN 1

L/MONO

ANTENNA /

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

RGB IN (PC)

OPTICAL DIGITAL

AUDIO OUT

AUDIO IN

(RGB/DVI)

/ DVI IN

2

1

VIDEO

AUDIO

USB IN

VIDEO

AUDIO

R

L/MONO

IN 3

AV IN 2

32LK330

Button

2

Description

/

I

Turns the power on or off.

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER



Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

v

CH

^

Scrolls through the saved channels.

USB input

HDMI input

Headphone

output

AV (Audio

and Video)

input

Side Connection panel

Screen

Speakers

Power indicator

Remote control and

intelligent

1

sensors

Rear Connection panel

(See p.73)

Buttons

2

NOTE

y

You can set the power indicator light to on or off by selecting

OPTION

in the main menus.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

Page is loading ...

LG 42LV3500 Owner's manual

Related papers

Other documents