Miller LJ000000 Owner's manual
- Category
- Car kits
- Type
- Owner's manual
This manual is also suitable for
OWNER’S MANUAL
© 2008 Miller Electric Mfg. Co.
FORM: OM-240 272A
2008−11
Wildcat 200 Running Gear (300 532)
DANGER! − Indicates a hazardous situation which, if not
avoided, will result in death or serious injury. The possible
hazards are shown in the adjoining symbols or explained
in the text.
Beware of electric shock from wiring. Stop engine and
disconnect negative (−) cable from battery before install-
ing this kit. Reinstall all panels and covers.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible ha-
zards are shown in the adjoining symbols or explained in
the text.
Falling equipment can cause serious personal injury and
equipment damage. Use lifting eye to lift unit and properly
installed accessories only, NOT gas cylinders. Do not
exceed maximum lifting eye weight rating. Lift and sup-
port only with proper equipment and correct procedures.
NOTICE
Indicates statements not related to personal injury.
Indicates special instructions.
Wear safety glasses with side shields.
1. Tools Needed
3/8, 9/16 in. 7/16, 1/2, 9/16 in.
OM-240 272 Page 2
2. Assembling Of Running Gear (300 532)
805 439-A
Assembly:
Install caster mounting bracket (item 11)
onto base rails (6, 13) using screws (16).
Install casters (12), onto mounting bracket
using hardware (5, 7). Assemble axle (8)
and wheels (9) (valve stems out) onto rails
(6, 13), and secure (15, 10).
Install onto welding generator using hard-
ware (5, 7).
Mount handle (1). Do not tighten hard-
ware. Install crossmember (3) and tighten
all hardware (2, 4, 14).
Description (Qty)
Part
No.
Item
No.
1 240261 Assy, Handle Running Gear (1)
2 108940 Screw, 250−20x .75 Hexwhd.61d Gr5 Pld (2)
3 220375 Bracket, Crossmember (1)
4 604224 Screw, 250−20x .75 Hexwhd.50d Stl Pld Slffmg Tap (6)
5 601965 Screw, 375−16x1.00 Hex Hd−pln Gr5 Pld (12)
6 240257 Rail, Base Support Rh (1)
7 167788 Nut, 375−16 .56hex .34h Stl Pld Sem Cone Wshr.88d (12)
8 235792 Axle, Wheel 1in Dia X 30.612 Lg (1)
9 235794 Wheel, Rbr Tire 14.500 Od X 4.750 Wide X 1.000 Bore (2)
10 145665 Ring, Rtng Ext 1.000 Shaft X .085 Thk E Style Pld (2)
11 235791 Bracket, Mtg Caster (1)
12 235793 Caster, Swvl 8.00 In Rubber X 2.000 In Wide (2)
13 240258 Rail, Base Support Lh (1)
14 152461 Nut, 250−20 .44hex .23h Stl Pld Sem Cone Wshr.65d (2)
15 602251 Washer, Flat 1.062 Id X 2.0 Od X .134T Stl Pld
ANSI 1.00 (2)
16 602159 Screw, 312−18x .75 Hex.66d Stl Pld Slffmg Tap (4)
Be sure to provide model
when ordering replacement
parts.
. Remove and discard existing
hardware before installing
handle.
1
2
3
4
5
6
7
8
9
10
16
11
12
5
7
13
4
14
15
-
1
-
2
Miller LJ000000 Owner's manual
- Category
- Car kits
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Miller LE000000 Owner's manual
-
-
-
-
-
-
Miller RUNNING GEAR, BOBCAT 200 AIR PAK (301460) Owner's manual
-
-
-