Hama 00040969 Owner's manual

Page is loading ...

This stereo wireless speaker system uses the

latest wireless technology to allow you to enjoy

music and TV sound in any room of your house or

outdoors effortlessly. This system is easy to

connect to any audio source such as a radio, TV,

video recorder, hi-fi system or CD/MP3/VCD/DVD

player. This system provides you with an exciting

sound experience with no need for complicated

cables or installation.

Equipment:

Wireless audio signal transmission using PLL

technology

•Autoscan function

•2 transmission channels can be selected

•2-way speaker system with bass boost function

to improve the bass sound

•Speaker power supply: Mains power supply unit

or 6x AA batteries/rechargeable batteries

•Transmitter automatic on/off

Specifications:

•Transmission frequency: 863MHz

•Frequency range: 40Hz – 12KHz

•Power: RMS 4 Watt; P. M.P.O 2 Watt per channel

•Harmonic distortion < 1.5%

•Up to 100m range outdoors

Contents:

1 xtransmitter

2 xwireless speakers

1 xpower supply unit for the transmitter,

12.5 V / 150 mA

2 xpower supply units for the wireless speakers,

12.0 V / 500 mA

1 xaudio adapter 3.5mm jack socket to

6.3 mm connector

1 xRCA to jack adapter

Controls:

Transmitter

Speaker

6

Operating guide

L

Antenna

Signal control

light (green)

Power control

light (red)

00040969bda 10.06.2005 10:35 Uhr Seite 6

7

Startup:

Transmitter:

1. Insert the antenna in the opening provided.

2. Connect the transmitter power supply unit to

a 230V mains socket.

3. Connect the transmitter power unit to the

connection socket of the transmitter.

The power LED (red) will illuminate.

4. The transmitter can be connected directly to the

3.5 mm headphone socket of an audio source

using the AUDIO connection cable (e.g. TV,

video recorder, radio, CD / MP3 / DVD player).

Use the adapter jack to connect the transmitter

to the 6.3 mm headphone socket of an audio

source. Use the adapter cable to connect the

transmitter to the audio output sockets (RCA)

of an audio source.

Connect the power supply unit to the connection

socket and connect the audio connection cable to

the audio source. As soon as the transmitter recei-

ves the audio signal, it switches automatically and

the signal LED (green) lights.

Speaker:

1. Insert 6 AA batteries/rechargeable batteries into

the battery compartments of the speakers

(observe the polarity in accordance with the illu-

strations in the battery compartments) or

connect the 12V power supply unit to a 230V

mains socket and the connection terminal of a

speaker.

2. Switch the speaker on by turning the VOLUME

ON/OFF button towards ON. The POWER /

STEREO LED lights. Switch the speaker off by

turning the VOLUME ON/OFF button towards OFF

until you hear a click.

Note:

If the speakers are being powered from the mains,

the power supply from the batteries is interrupted.

The speakers do not have an integrated charging

function. Rechargeable batteries must be charged

in a separate charger.

Operation

1. Switch on the audio source. The signal LED indi-

cates that an audio signal is being received. The

transmitter switches off automatically if it does

not receive a signal for approx. 90 seconds.

2. Select channel 1 or 2 to optimise transmission.

3. Slide the L/Mono/R slide switch for the speaker

you select as left to L and to R for the speaker

you select as the right speaker.

*If the audio source only supports mono audio

signals, slide the slide switch on both speakers

to MONO.

4. Switch the ON/OFF VOLUME switch to on and

set the required volume.

00040969bda 10.06.2005 10:35 Uhr Seite 7

8

5. Press the AUTO TUNING button to optimise

reception by the speakers. The automatic

frequency search starts. The search stops when

it receives a signal. The POWER / STEREO LED

changes from red to green.

A) The distance between the speakers and the

transmitter should not be greater than

7 metres when you press the AUTO TUNING

button.

B) If the reception is poor, switch to the other

channel on the transmitter (you can choose

between two channels) and press the AUTO

TUNING button again.

6. If necessary, you can amplify the bass by pres-

sing the BASS BOOST button. Press this button

again to deactivate the function.

Note:

You can carry the speakers freely from room to

room without interference. Should interference

occur, press the AUTO TUNING button to rectify

the problem.

If background noise is audible, switch the trans-

mitter to the other channel and move the speaker

to another position. You can adjust the transmissi-

on quality at any time by choosing channel 1 or 2

and pressing the Autotuning button.

The signal may become weaker if the speakers

are moved further away from the transmitter.

Switching off

1. Turning the VOLUME ON/OFF button towards

OFF until you hear a click to switch the speaker

off. The LED goes out.

2. The transmitter switches off automatically for

protection and to conserve energy when no sig-

nal is received for 2 minutes. It switches on

again automatically as soon as the transmitter

receives a signal again.

00040969bda 10.06.2005 10:35 Uhr Seite 8

9

Safety Instructions

Faults

•Make sure that the stereo reception control light

illuminates. If the control light does not illumina-

te, press the frequency selector on the speaker

until the control light illuminates.

•Select another frequency channel on the rear of

the transmitter. 2 channels are available. Press

the autotuning button on the speakers until no

extraneous noise is audible.

•The batteries / rechargeable batteries in the

speakers are too low. Please replace them.

•Make sure that the output signal set on your

playback device is loud enough.

•You have exceeded the distance between the

transmitting unit and speakers or there are too

many hindrances such as multiple steel-reinfor-

ced walls, metal covers, etc. between the trans-

mitter and speakers.

•The transmitter is directly next to another elec-

trical transmitter source such as a wireless tele-

phone, microwave oven, computer, etc. Increase

the distance between the devices.

We strive to continually improve all types and

models. Therefore, please bear in mind that the

form of the scope of delivery, equipment and tech-

nology are subject to change at all times. Therefo-

re, no claims can be derived from the specificati-

ons, illustrations and descriptions in this manual.

This manual may not be reprinted, reproduced or

translated in part or whole without prior written

consent from the manufacturer. The manufacturer

reserves all rights.

Subject to changes.

Safety instructions:

1. Keep away from dirt and moisture and avoid

overheating. Only use in dry rooms.

2. Do not open up appliance. If appliance becomes

damaged, do not continue to use.

Only allow specialists to repair device!

3. Only use dry, soft cloths for cleaning purposes.

4. Caution! Keep these speakers, as with all elec-

trical devices, out of the reach of children

5. Keep away from direct sunlight, radiators and

vibrations. Protect from dust.

6. If you do not intend to use the appliance for a

long period, disconnect from mains.

7. The transmitter and receiver are designed for a

220-240V AC/50Hz mains supply.

00040969bda 10.06.2005 10:35 Uhr Seite 9

Page is loading ...

Hama 00040969 Owner's manual

Hama 00040969 Owner's manual

in other languages

Related papers

Other documents