7. Use a brush to scrub server
interior.
8. Unscrew faucet assembly.
6. Reattach the sprayhead.
GPR BREWER & SERVER
WEEKLY CLEANING INSTRUCTIONS
11. Rinse Cycle - Place empty
server on brewer. Select 1
gallon batch size and press
“START”.
9. Use brush on faucet shank.
36336.0004A 10/11 ©2011 Bunn-O-Matic Corporation
WEEKLY CLEANING
3. Use the long end of the
deliming key to clean the
sprayhead outlet fitting.
2. Remove sprayhead and wipe
down brewhead.
4. Use the short end of the
deliming key to clean the
bypass outlet fitting.
Complete
daily
cleaning
first
5. Use the pointed end of the
deliming key to remove lime
deposits from the sprayhead.
12. Drain rinse solution from
server and return to coffee
brewer for normal operation.
10. Reattach faucet assembly.
RELEASED FOR PRODUCTION
DIR Num: 36336.0004 19, May 2015
  • Page 1 1

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI