1. Introduction PS113A
Thanks for choosing PS113A.
PS113A is a USB speaker system which gives you good audio experience
with portable flexibility.
This user manual is a guide for users to understand how to use this product.
2. Packaging List
The following items are included in the packaged box:
- PS113A speaker unit.
- USB audio adaptor
- Speaker cable from PS113A to USB audio adaptor
- This user guide.
3. PS113A Features
PS113A USB stereo speaker is design for all kind of PC base products. It is
USB compatible and utilizes USB bus power. No driver is needed for audio
playback on all mainstream OSs; therefore this device provides a truly plug-
and-play feature for external digital audio play back.
Advantage of USB 2Ch Speakers:
• Easy to replace "entry level" sound card solutions.
• No more limitations on analog signal cable line.
• Utilize USB bus power, no external adapter required.
• All in one design, saving weight and easy to carry on.
• Plug and play for any PC System reach maximum compatibility.
• Digital audio sound solution fit next generation multi-media trend.
• Greater than +100db SNR (Idle status) ensure "hiss-free" and high audio
fidelity.
• User friendly and adjustable GUI for a tailor made listening environment.
ADE-200A
User Manual
Computer USB Port
1
2
3
4. System Requirement and Installation
This device must be applied on USB specification products. And user should
to confirm that PC operation supports USB function, USB 1.1 or 2.0.
• OS Support ¡GWin98SE, WinME, Win2000, WinXP, Mac OS 9.0 and 10.1
• System recommended¡Guse Intel Pentium III ©Î AMD K6 500 CPU above
• At least 64 MB RAM (Win98SE) or 128MB RAM (WinME, Win2000 and
WinXP)
• At least 50 MB hard disk space
• For good sound quality, please adjust your system's H/W acceleration and
Sample rate conversion quality to Full and Best.
Making cable Connections
1 Plug speaker cable to back of speaker unit.
2 Plug speaker cable to USB adaptor
3 Plug USB adaptor to computer USB port.
USB audio adaptor driver installation (No external driver installed)
1 Turn on PC system and connect USB Multi-media Sound Device to PC
system.
2 Computer system should detect an USB audio device and required driver
software will be installed automatically. Please wait unit system indicate
"Device ready for use".
Note: Some USB Host Controller may have problem with data stream package loss,
this will influence output audio data and make some discontinuous sound. But this is
very rare.
Sometime, when user plug USB Personal Multi-media Device on PC system and OS
cannot auto change audio device to USB audio, please switch the audio device to
USB audio sound and audio devices properties in control panel.
1. Introduction ADE-200A
Thanks for choosing ADE-200A.
ADE-200A is a USB speaker system which gives you good audio experience
with portable flexibility.
This user manual is a guide for users to understand how to use this product.
2. Packaging List
The following items are included in the packaged box:
- ADE-200A speaker unit.
- USB audio adaptor
- Speaker cable from ADE-200A to USB audio adaptor
- This user guide.
3. ADE-200A Features
ADE-200A USB stereo speaker is design for all kind of PC base products. It is
USB compatible and utilizes USB bus power. No driver is needed for audio
playback on all mainstream OSs; therefore this device provides a truly plug-
and-play feature for external digital audio play back.
Advantage of USB 2Ch Speakers:
• Easy to replace "entry level" sound card solutions.
• No more limitations on analog signal cable line.
• Utilize USB bus power, no external adapter required.
• All in one design, saving weight and easy to carry on.
• Plug and play for any PC System reach maximum compatibility.
• Digital audio sound solution fit next generation multi-media trend.
• Greater than +100db SNR (Idle status) ensure "hiss-free" and high audio
fidelity.
• User friendly and adjustable GUI for a tailor made listening environment.
ADE-200A
User Manual
Computer USB Port
1
2
3
4. System Requirement and Installation
This device must be applied on USB specification products. And user should
to confirm that PC operation supports USB function, USB 1.1 or 2.0.
• OS Support ¡GWin98SE, WinME, Win2000, WinXP, Mac OS 9.0 and 10.1
• System recommended¡Guse Intel Pentium III ©Î AMD K6 500 CPU above
• At least 64 MB RAM (Win98SE) or 128MB RAM (WinME, Win2000 and
WinXP)
• At least 50 MB hard disk space
• For good sound quality, please adjust your system's H/W acceleration and
Sample rate conversion quality to Full and Best.
Making cable Connections
1 Plug speaker cable to back of speaker unit.
2 Plug speaker cable to USB adaptor
3 Plug USB adaptor to computer USB port.
USB audio adaptor driver installation (No external driver installed)
1 Turn on PC system and connect USB Multi-media Sound Device to PC
system.
2 Computer system should detect an USB audio device and required driver
software will be installed automatically. Please wait unit system indicate
"Device ready for use".
Note: Some USB Host Controller may have problem with data stream package loss,
this will influence output audio data and make some discontinuous sound. But this is
very rare.
Sometime, when user plug USB Personal Multi-media Device on PC system and OS
cannot auto change audio device to USB audio, please switch the audio device to
USB audio sound and audio devices properties in control panel.
1. Introduction PS113A
Thanks for choosing PS113A.
PS113A is a USB speaker system which gives you good audio experience
with portable flexibility.
This user manual is a guide for users to understand how to use this product.
2. Packaging List
The following items are included in the packaged box:
- PS113A speaker unit.
- USB audio adaptor
- Speaker cable from PS113A to USB audio adaptor
- This user guide.
3. PS113A Features
PS113A USB stereo speaker is design for all kind of PC base products. It is
USB compatible and utilizes USB bus power. No driver is needed for audio
playback on all mainstream OSs; therefore this device provides a truly plug-
and-play feature for external digital audio play back.
Advantage of USB 2Ch Speakers:
• Easy to replace "entry level" sound card solutions.
• No more limitations on analog signal cable line.
• Utilize USB bus power, no external adapter required.
• All in one design, saving weight and easy to carry on.
• Plug and play for any PC System reach maximum compatibility.
• Digital audio sound solution fit next generation multi-media trend.
• Greater than +100db SNR (Idle status) ensure "hiss-free" and high audio
fidelity.
• User friendly and adjustable GUI for a tailor made listening environment.
ADE-200A
User Manual
Computer USB Port
1
2
3
4. System Requirement and Installation
This device must be applied on USB specification products. And user should
to confirm that PC operation supports USB function, USB 1.1 or 2.0.
• OS Support ¡GWin98SE, WinME, Win2000, WinXP, Mac OS 9.0 and 10.1
• System recommended¡Guse Intel Pentium III ©Î AMD K6 500 CPU above
• At least 64 MB RAM (Win98SE) or 128MB RAM (WinME, Win2000 and
WinXP)
• At least 50 MB hard disk space
• For good sound quality, please adjust your system's H/W acceleration and
Sample rate conversion quality to Full and Best.
Making cable Connections
1 Plug speaker cable to back of speaker unit.
2 Plug speaker cable to USB adaptor
3 Plug USB adaptor to computer USB port.
USB audio adaptor driver installation (No external driver installed)
1 Turn on PC system and connect USB Multi-media Sound Device to PC
system.
2 Computer system should detect an USB audio device and required driver
software will be installed automatically. Please wait unit system indicate
"Device ready for use".
Note: Some USB Host Controller may have problem with data stream package loss,
this will influence output audio data and make some discontinuous sound. But this is
very rare.
Sometime, when user plug USB Personal Multi-media Device on PC system and OS
cannot auto change audio device to USB audio, please switch the audio device to
USB audio sound and audio devices properties in control panel.
1. Introduction PS113A
Thanks for choosing PS113A.
PS113A is a USB speaker system which gives you good audio experience
with portable flexibility.
This user manual is a guide for users to understand how to use this product.
2. Packaging List
The following items are included in the packaged box:
- PS113A speaker unit.
- USB audio adaptor
- Speaker cable from PS113A to USB audio adaptor
- This user guide.
3. PS113A Features
PS113A USB stereo speaker is design for all kind of PC base products. It is
USB compatible and utilizes USB bus power. No driver is needed for audio
playback on all mainstream OSs; therefore this device provides a truly plug-
and-play feature for external digital audio play back.
Advantage of USB 2Ch Speakers:
• Easy to replace "entry level" sound card solutions.
• No more limitations on analog signal cable line.
• Utilize USB bus power, no external adapter required.
• All in one design, saving weight and easy to carry on.
• Plug and play for any PC System reach maximum compatibility.
• Digital audio sound solution fit next generation multi-media trend.
• Greater than +100db SNR (Idle status) ensure "hiss-free" and high audio
fidelity.
• User friendly and adjustable GUI for a tailor made listening environment.
ADE-200A
User Manual
Computer USB Port
1
2
3
4. System Requirement and Installation
This device must be applied on USB specification products. And user should
to confirm that PC operation supports USB function, USB 1.1 or 2.0.
• OS Support ¡GWin98SE, WinME, Win2000, WinXP, Mac OS 9.0 and 10.1
• System recommended¡Guse Intel Pentium III ©Î AMD K6 500 CPU above
• At least 64 MB RAM (Win98SE) or 128MB RAM (WinME, Win2000 and
WinXP)
• At least 50 MB hard disk space
• For good sound quality, please adjust your system's H/W acceleration and
Sample rate conversion quality to Full and Best.
Making cable Connections
1 Plug speaker cable to back of speaker unit.
2 Plug speaker cable to USB adaptor
3 Plug USB adaptor to computer USB port.
USB audio adaptor driver installation (No external driver installed)
1 Turn on PC system and connect USB Multi-media Sound Device to PC
system.
2 Computer system should detect an USB audio device and required driver
software will be installed automatically. Please wait unit system indicate
"Device ready for use".
Note: Some USB Host Controller may have problem with data stream package loss,
this will influence output audio data and make some discontinuous sound. But this is
very rare.
Sometime, when user plug USB Personal Multi-media Device on PC system and OS
cannot auto change audio device to USB audio, please switch the audio device to
USB audio sound and audio devices properties in control panel.
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Audio Pro A2.14 Live Quick start guide
-
Creative Notebook Travel Speaker User manual
-
LTB Audio Systems USB Pro 5.1 Surround Sound Headphone System User manual
-
Ozaki NB001 User manual
-
Genius HS-04U User manual
-
DTS ModiX HD-3520 User manual
-
DTS HDTV MODIX HD-2510 User manual
-
Cyber Acoustics AC-840 User manual
-
ADS Technologies DLX-181 DUAL LINK CARDBUS User manual
-
LTB Audio Systems 5.1 User manual
