ConnectPRO UDP-12AP User manual

ConnectPRO
Brand
ConnectPRO
Model
UDP-12AP
Category
KVM switches
Type
User manual

This manual is also suitable for

Port Selection
Press button to select port
for control
Use IR remote controller for
selecting port ( optional )
Use keyboard hot-key to select port
TM
Installation Guide
UDP-12AP / UDP-14AP
DisplayPort 1.4 USB KVM switch w/ DP Monitor, USB DDM, Audio, and Multi-Hotkey
USB
TM
DisplayPort
Product View
UDP-12AP
UDP-14AP
320 mm ( 12.6 inch )
UDP-14AP
44 mm
( 1.73 inch )
UDP-12AP
What is USB DDM
USB Devices
PC
100 evice mapping%d
USB DDM port
100 evice mapping%d
100 evice mapping%d
100 evice mapping%d
USB Devices
Touch-screen
wireless keyboard
and mouse
Controller
Touch-screen
wireless keyboard
and mouse
Controller
Front & Rear View
IR Remote Control Sensor
Push-button selection
Hot-key selection
Hot-key indicator
( All LEDs not lit = hot-key has been disabled )
Special note:
LED light will be quickly flashing while the KVM is mapping out the device.
F
USB 2.0 HID DDM console connections for mouse and keyboard devices
USB device sharing port ( USB 3.0 )
Headphone / Microphone
Serial port for extra control and firmware upgrade
DisplayPort for digital display monitor
KVM ports for connecting systems
E
F
KVM
UDP-12AP
UDP-14AP
Reset
Ctrl
Shift
Scroll
Lock
Caps
Lock
Hot-Key
Select
/
UDP-12AP
USB KVMSWITCH DP
Connect Power Adaptor
123
Connect console
1. DisplayPort Monitor
2. Mouse
3. Keyboard
4. Headphone / Microphone
Special note:
If your device cannot work in rear console DDM ports properly, please connect it to the hub ports.
The rear console DDM ports will only function properly with HID devices.
Connect cables
Computer system to KVM port
1. USB(3.0) A-B cable
2. DisplayPort cable
3. Headphone / Microphone
cable
Via RJ-45 serial port -
control commands issued from
a terminal application such as
Hyper Terminal, Terra Term, and Putty.
Via Mouse-click switching -
An optional function activated through use
of special hot-key command.
The hotkey sequence so that people know
how to enable it.
275 mm ( 10.83 inch )
MONITORAND
Reset
Ctrl
Shift
Scroll
Lock
Caps
Lock
Hot-Key
Select
/
UDP -12AP
USB KVM SWITCH
DP
MONITOR AND
DP
5V DC in
USB 2
USB
USB 1
DP DP
E
44 mm
( 1.73 inch )
Reset
Ctrl
Shift
Scroll
Lock
Caps
Lock
Hot-Key
Select
/
UDP-14AP
USB KVMSWITCH DP MONITOR AND
1 2 3 4
Power input
DC 5V 5000 mA
Master-IT USB switches are
designed to effectively save
energy.
100% compatible with USB HID devices ( with USB DDM ports )
Compatible with all versions of Windows, Linux and Mac OS
Front panel push-button for easy channel selection
User selectable multi-hotkey ( Control, Shift, Scroll Lock, Caps Lock )
Backlit push-button with multi-color LED for easy monitoring and selection
Built-in IR remote receiver
Buzzer sound for channel switching confirmation
Plug-and-Play system configuration
Additional USB(3.0) ports for device sharing, or to assign to a certain port
Independent audio port switching
No drivers needed for keyboard and mouse operation
RS-232/serial port for control and firmware upgradable
DisplayPort interface, support isplayPort display
D
Max video resolution supported 4K: @60Hz or 5K @60~120Hz
Built-in All-time Full EDID/DDC ( Active - DDC to all connected systems )
Headphone / Microphone interface for each port
3-year Warranty
Features & Benefits
Hot-Key Command
1. Hot-key selection
Default Hot-key =Ctrl
Via front panel Hot-key select button
Via Hot-key control
Hot-key Hot-key KNew Hot-key
2. Hot-key and functions
(Turn off Auto Channel Scan by pressing any key)
Hot-key Hot-key Turn on Auto Channel Scan
SN
=last setting interval , default =5 seconds
S
=5, 8, 15, 20, 30 seconds
N15
~
(*Default =buzzer sound off)
Turn switching confirmation
buzzer sound on/off
Z
Hot-key Hot-key
Switch to Port #1 ( ~ Port #4 )
1
Hot-key 4
Hot-key ~
3. Assign USB(3.0) port command
Hot-key Hot-key 0 PH Default USB port setting
( Sync with KVM port selection )
0
H
Hot-key Hot-key 1 P Assign USB #1 to
a certain port
1~4
4. Assign audio port command
Assign audio port to
a certain port
O
Hot-key Hot-key 1~4
Audio port turn back to Sync switch mode
Hot-key Hot-key O 0
Hot-key Hot-key R 0
5. Mouse click switching command Mouse click switch function turn on
(double click on the center wheel of mouse
will switching to next channel)
Hot-key Hot-key M 1
Mouse click switch function turn off
Hot-key Hot-key M 0
Reset to KVM Hot-key default mode
6. Reset to KVM Hot-key default
TM
IG-UDP1214AP_V1.1
Specification
Panel button control
Computer port number
IR remote control
Hot plug-and-play
Beep sound
Cable length
Resolution
Keyboard
& Mouse
Monitor 1
Functional
Button LED color indication
Hot key control
Selectable scan interval
Auto scan
Keyboard
& Mouse
Monitor 1
System
connectors
Console
connectors
UDP-12AP UDP-14AP
2
2
USB B(3.0) x 2
4
4
PC On-Line - Green , Selected - Red , Both - Orange
USB B(3.0) x 2
USB A x 2 ( DDM Technology )
Yes
Yes ( Built-in receiver, controller optional )
Yes
5, 8, 15, 20, 30 sec ( Hot key )
Yes ( Hot key )
On / Off ( Hot key selectable )
Max 4K @60Hz, 5K @60~120Hz
5M ( 15ft ) at Console; 5M ( 15ft ) at PC
Audio
Audio Speaker x 2 ,
Mic x 2 (3.5mm)
Speaker x 4 ,
Mic x 4 (3.5mm)
Speaker x 1 ,
Mic x 1 (3.5mm)
Speaker x 4 ,
Mic x 4 (3.5mm)
Total USB device sharing port
Mechanical
Operating voltage
Power frequency
Power
Certification
Weight
Height
Width
Depth
Power consumption
USB A ( USB 3.0 ) x 2
FCC, CE
1200 g
( 2.65 lb )
44 mm
( 1.73 inch )
275 mm
( 10.83 inch )
131 mm
( 5.16 inch )
6 W 9.2 W
50-60 Hz
1400 g
( 3.09 lb )
44 mm
( 1.73 inch )
320 mm
( 12.6 inch )
150 mm
( 5.91 inch )
Monitor 2
Monitor 2
DisplayPort (20 pin) / Female
Limited Warranty For ConnectPRO KVM Switches
ConnectPRO offers a 3-year limited warranty for all of its KVM Switches and
KVM Switch modules. ConnectPRO stands behind its products assured that
you're purchasing a proven technology with quality and reliability.
Ordering Information
DisplayPort (20 pin) / Female
DisplayPort (20 pin) / Female DisplayPort (20 pin) / Female
None None
None None
Cables
Model Description
Optional part / accessory
4-port USB(3.0) DisplayPort KVM Switch with Audio and DDM
UDP-12AP
UDP-14AP
2-port USB(3.0) DisplayPort KVM Switch with Audio and DDM
CDP14-202-06 6-ft DisplayPort 1.4 cable (CDPDP-202VESA-06 for VESA certified cable)
CDP14-202-10 10-ft DisplayPort 1.4 cable (CDPDP-202VESA-10 for VESA certified cable)
CDP14-202-15 15-ft DisplayPort 1.4 cable (CDPDP-202VESA-15 for VESA certified cable)
CAS-202-06 6-ft audio cable
CAS-202-10 10-ft audio cable
CAS-202-15 15-ft audio cable
Power Adaptor
Power supply DC 5V ( 5000 mA ) - AC 110/220V
PA1030-050IB500
* Any other interface is available upon request
IR Remote Controller
RC-01 IR remote controller for 2-port & 4-port KVM Switch
Rack Mounting Kit
RMK-1901 19” rack mounting bracket set for UDP-12AP(275 wide) KVM Switch
RMK-1903 19” rack mounting bracket set for UDP-14AP(320 wide) KVM Switch
RBK-19
UC3-AB-06 6-ft USB3.0 cable
UC3-AB-10 10-ft USB3.0 cable
UC3-AB-15 15-ft USB3.0 cable
RMK-1903C
RMK-1901C
Includes RMK-1903 and RBK-19
Includes RMK-1901 and RBK-19
Cable support bar for 19” rack
DC 5V ( 5000 mA )
7F., No.120, Sec. 1, Sanmin Rd., Banciao Dist.,
New Taipei City 220, Taiwan
Tel +886-2-8964-2700 Fax +886-2-8964-2977
20525 Paseo Del Prado Walnut, CA 91789, USA
Tel +1-888-999-1983, +1-909-444-9288
Fax +1-909-444-9289
Corporate Office
Design Center and Operational Hubs
ConnectPRO - USA, Taiwan
www.connectpro.com
  • Page 1 1
  • Page 2 2

ConnectPRO UDP-12AP User manual

ConnectPRO
Brand
ConnectPRO
Model
UDP-12AP
Category
KVM switches
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents