ADJ ENT300 User manual

Brand: ADJ

Model: ENT300

Category: Fog Machine

Type: User manual

This manual is also suitable for

Entour Haze Pro

User Instructions

Caution: Haze Machines may set o Smoke Alarms!

ENTOUR HAZE PRO

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building, and

electrical damages, injuries to any persons, and direct or indi-

rect economic loss associated with the use or reliance of any

information contained within this document, and/or as a result

of the improper, unsafe, unsucient and negligent assembly,

installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

Date Document

Version

Software

Version

DMX

Channel

Modes

Notes

DOCUMENT VERSION

Please check www.adj.com for the latest revision/update of this guide.

10/24/17 1 1.01 1/2/4 Initial Release

• Be sure to save the packing carton in the unlikely event the unit

may have to be returned for service

• Do not spill water or other liquids into or on to your hazer. Be

sure that all the haze uid is kept inside the uid reservoir

• Be sure that the local power outlet match that or the required

voltage for your haze machine

• Do not remove the top cover under any conditions. There are no

user serviceable parts inside

• Disconnect the unit’s main power when left unused for long peri-

ods of time

• Never connect this unit to a dimmer pack

• Do not attempt to operate this unit, if it becomes damaged in anyway

• Never operate this unit when it’s cover is removed

• To reduce the risk of electrical shock or re, do not expose this

unit rain or moisture

• Do not attempt to operate this unit if the power cord has been fray-

ed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the

risk of electrical shock and re in case of an internal short

• Disconnect from main power before making any type of connection

• Never block the ventilation holes. Always be sure to mount this

unit in an area that will allow proper ventilation. Allow about 6”

(15cm) between this device and a wall

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties

• Always mount this unit in a safe and stable matter

• Please route your power cord out of the way of foot trac. Power

cords should be routed so they are not likely to be walked on,

pinched by items placed upon or against them

• The unit should only be serviced by qualified service personnel

when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the unit.

C. The unit has been exposed to rain or water.

D. The appliance does not appear to operate normally or

exhibits a marked change in performance.

Entour Haze Pro Safety Precautions

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 3

Introduction: Congratulations, you have just purchased one of the

most reliable haze machines on the market today! The Entour Haze Pro

faze machine have been designed to perform reliably for years when

the guidelines in this booklet are followed. Please read and understand

the instructions in this manual carefully and thoroughly before attempt-

ing to operate this unit. These instructions contain important informa-

tion regarding safety during use and maintenance.

Customer Support: ADJ Products, LLC provides a toll free customer

support line, to provide set up help and to answer any question should

you encounter problems during your set up or initial operation. You

may also visit us on the web at www.adj.com for any comments or

suggestions. For service related issue please contact ADJ Products,

LLC. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: [email protected]

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

Do not discard the shipping cartoon in the trash. Please recycle when

ever possible.

SAFETY ISSUES:

NEVER POINT OR AIM A HAZE MACHINE TOWARDS PEOPLE OR

THEIR CLOTHING. THIS UNIT EMITS HOT VAPOR AND SHOULD

BE USED WITH THE SAME CARE THAT YOU WOULD OBSERVE

WHEN USING AN ELECTRIC KETTLE OR IRON.

Entour Haze Pro Introduction

Please Note: Specications and improvements in the design of

this unit and this manual are subject to change without any prior

written notice.

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 2

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 4 ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 5

Power Supply: Before plugging your unit in, be sure the source volt-

age in your area matches the required voltage for your ADJ Entour Haze

Pro. The ADJ Entour Haze Pro is available in a 120v and 230v version.

Because line voltage may vary from venue to venue, you should be

sure your unit voltage matches the wall outlet voltage before attempt-

ing to operate you xture.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used as a form of communication between intelligent fixtures

and controllers. A DMX controller sends DMX data instructions from

the controller to the fixture. DMX data is sent as serial data that trav-

els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR ter-

minals located on all DMX fixtures (most controllers only have a DATA

“OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of

dierent manufactures to be linked together and operate from a single

controller, as long as all xtures and the controller are DMX compli-

ant. To ensure proper DMX data transmission, when using several

DMX fixtures try to use the shortest cable path possible. The order

in which fixtures are connected in a DMX line does not influence the

DMX addressing. For example; a fixture assigned a DMX address of 1

may be placed anywhere in a DMX line, at the beginning, at the end,

or anywhere in the middle. When a fixture is assigned a DMX address

of 1, the DMX controller knows to send DATA assigned to address 1

to that unit, no matter where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX Operation):

The Entour Haze Pro can be controlled via DMX-512 protocol. The Entour

Haze Pro has 3 DMX channel modes, 1 channel, 2 channel, and 4 chan-

nel. The DMX address is set on the back panel. Your unit and your DMX

controller require a standard 3-pin XLR connector

for data input and data output (Figure 1). We recom-

mend Accu-Cable DMX cables. If you are making

your own cables, be sure to use standard 110-120

Ohm shielded cable (This cable may be purchased

at almost all pro lighting stores). Your cables should

be made with a male and female XLR connector on

either end of the cable. Also remember that DMX

cable must be daisy chained and cannot be split.

Figure 1

Notice: Be sure to follow gures two and three when making your own

cables. Do not use the ground lug on the XLR connector. Do not con-

nect the cable’s shield conductor to the ground lug or allow the shield

conductor to come in contact with the XLR’s outer casing. Grounding

the shield could cause a short circuit and erratic behavior.

DMX512 IN

3-PIN XLR

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

DMX512

DMX+,DMX-,COMMON

Termination reduces signal errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

DMX +

DMX -

COMMON

DMX512 OT

3-PIN XLR

Figure 2

Figure 3

1 Ground 1 Ground

XLR Male Socket

XLR Pin Conguration

3 Hot

2 Cold 2 Cold

3 Hot

XLR Female Socket

Pin 3 = Data True (positive)

Pin 2 = Data Compliment (negative)

Pin 1 = Ground

Special Note: Line Termination.

When longer runs of cable are

used, you may need to use a terminator on the last unit to avoid erratic

behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is con-

nected between pins 2 and 3 of a male XLR connector (DATA + and

DATA -). This unit is inserted in the female XLR connector of the last

unit in your daisy chain to terminate the line. Using a cable terminator

(ADJ part number Z-DMX/T) will decrease the possibilities of erratic

behavior.

DMX512 IN

3-PIN XLR

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

DMX512

DMX+,DMX-,COMMON

Termination reduces signal errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

DMX +

DMX -

COMMON

DMX512 OT

3-PIN XLR

Figure 4

5-Pin XLR DMX Connectors.

Some manufactures use 5-pin DMX-

512 data cables for DATA transmission in place of 3-pin. 5-pin DMX

xtures may be implemented in a 3-pin DMX line. When inserting stan-

dard 5-pin data cables in to a 3-pin line a cable adaptor must be used,

these adaptors are readily available at most electric stores. The chart

below details a proper cable conversion.

Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)

Pin 1

Do Not Use

Pin 3

Pin 2

Pin 1

Pin 3

Pin 2

Not Used

Data True (+ signal)

Data Compliment (- signal)

Ground/Shield

3-Pin XLR to 5-Pin XLR Conversion

Entour Haze Pro DMX Information Entour Haze Pro DMX Information

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 6 ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 7

Entour Haze Pro General Set-Up

1. Open the shipping carton and carefully remove the unit from the shipping

carton.

2. Be sure to remove all the packing material especially around the nozzle.

3. Set the haze machine on a flat dry surface and fill the fluid reservoir

through the haze outlet which also is the liquid inlet. Use American DJ

brand HAZE/G juice. DO NOT OVERFILL. Make sure the liquid level does

not exceed the maximum fluid level mark on the front of the haze.

4. Plug the unit in to a matching power supply.

5. Follow the operating instructions on the next pages for proper operation.

NOTE: When refilling, please wait 5 min. enabling all haze liquid to fill the

tank entirely prior to switching on.’

NOTE: When makiing short-range movement, please apply the supplied stopper

to prevent oil spill.

Entour Haze Pro Dimensional Drawing

14.96”/380mm 20.86”/530mm

14.96”/380mm

Entour Haze Pro Layout

A. Flight case

B. Visible liquid level window with

blue LED

C. Smoke outlet (Liquid inlet)

D. Stopper

E. Direction turntable with magnet

F. LCD display

G. 6 Function Buttons

H. DMX 5 pin XLR output

I. DMX 5 pin XLR input

J. DMX 3 pin XLR output

K. DMX 3 pin XLR input

L. Power input

M. Fuse Holder

N. Power Switch

O. Wire storage belt

P. Drain valve

Q. Sponge

START UP:

1. Connect the provided locking power cable to the haze machine

input. Then plug the power cord into a matching power source.

There is no ON/OFF switch.

2. Primary power is now “On”.

3. 2 Seconds after power is applied the display

will show the following screen.

NOTE: There is no warm up time. The unit can operate right

away.

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 8 ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 9

Version:

1.0

Warming

Up……

DMX set

Addr- xxx

DUR. xxx

INT. xxx

--> Dura xxx

Intv xxx

Dura xxx

--> Intv xxx

DUR. xxx

INT. xxx

(Stop)

Cleaning

DMX set

Addr- xxx

--> Vol xxx

Fan xxx

--> Vol xxx

Fan xxx

Vol xxx

--> Fan xxx

(Stop)

Cleaning

DMX set

Addr- xxx

Manual

V100 F100

DMX set

Addr- xxx

*Hold

TimeSet

DMX set

Addr- xxx

1ch.Axxx

VxxxFxxx

2ch.Axxx

VxxxFxxx

4ch.Axxx

VxxxFxxx

DxxxIxxx

4ch.Axxx

VxxxFxxx

Entour Haze Pro Start Up Entour Haze Pro Control Panel

DMX set

Addr - 1

FUNCTION BUTTON - Press this button to cycle between DMX addressing,

fan adjustment, duration adjustment, and interval adjustment. Use the UP

and DOWN buttons to make your desired adjustments.

UP BUTTON - Use this button to make adjustments to DMX addressing,

DMX channel mode, duration setting, and interval setting.

DOWN BUTTON - Use this button to make adjustments to DMX addressing,

DMX channel mode, duration setting, and interval setting.

TIMER ON/OFF BUTTON - Press this button to activate/deactivate the timer

function.

HOLD BUTTON - Press this button for continuous haze output.

MANUAL BUTTON - Press and hold this button manual haze output.

Release the button to stop haze output. This function will override any state

of operation that is currently running.

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 10 ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 11

CONTINUOUS HAZING:

1. Press the HOLD button to start continuous

hazing. NOTE: Hazing will start right

away.

2. Use the UP or DOWN buttons to adjust

Fan speed, 5%-100%.

3. Press the HOLD button again to stop continuous hazing.

4. When continuous hazing is the stopped, the

display will revert back to the DMX display.

NOTE: When using continuous hazing, you are able to press the

“TIMER” button to switch to timed hazing directly.

Entour Haze Pro Operation

TIMER OPERATION:

1. Press the TIMER button to enter the haze

timer operation.

2. Press the FUNCTION button to enter the timer settings menu.

3. Use the UP or DOWN buttons to adjust

duration (output) time, 3s-250s.

4. Press the FUNCTION button to switch to interval adjustment.

5. Use the UP or DOWN buttons to adjust

interval (pause) time, 5s-250s.

6. Press the TIMER button again to activate the

timer function. Press the TIMER button

again to deactivate the timer function.

7. When the timer has been stopped, the

DMX display will show.

NOTE: When using timer operation, you are able to press the

“MANUAL” button to switch to continuous hazing.

When using the timer operation, you can press “MANUAL” to

switch to manual hazing directly. Manual hazing can be started

under any operation.

Entour Haze Pro Operation

Version:

1.0

Warming

Up……

DMX set

Addr- xxx

DUR. xxx

INT. xxx

--> Dura xxx

Intv xxx

Dura xxx

--> Intv xxx

DUR. xxx

INT. xxx

(Stop)

Cleaning

DMX set

Addr- xxx

--> Vol xxx

Fan xxx

--> Vol xxx

Fan xxx

Vol xxx

--> Fan xxx

(Stop)

Cleaning

DMX set

Addr- xxx

Manual

V100 F100

DMX set

Addr- xxx

*Hold

TimeSet

DMX set

Addr- xxx

1ch.Axxx

VxxxFxxx

2ch.Axxx

VxxxFxxx

4ch.Axxx

VxxxFxxx

DxxxIxxx

4ch.Axxx

VxxxFxxx

Version:

1.0

Warming

Up……

DMX set

Addr- xxx

DUR. xxx

INT. xxx

--> Dura xxx

Intv xxx

Dura xxx

--> Intv xxx

DUR. xxx

INT. xxx

(Stop)

Cleaning

DMX set

Addr- xxx

--> Vol xxx

Fan xxx

--> Vol xxx

Fan xxx

Vol xxx

--> Fan xxx

(Stop)

Cleaning

DMX set

Addr- xxx

Manual

V100 F100

DMX set

Addr- xxx

*Hold

TimeSet

DMX set

Addr- xxx

1ch.Axxx

VxxxFxxx

2ch.Axxx

VxxxFxxx

4ch.Axxx

VxxxFxxx

DxxxIxxx

4ch.Axxx

VxxxFxxx

Version:

1.0

Warming

Up……

DMX set

Addr- xxx

DUR. xxx

INT. xxx

--> Dura xxx

Intv xxx

Dura xxx

--> Intv xxx

DUR. xxx

INT. xxx

(Stop)

Cleaning

DMX set

Addr- xxx

--> Vol xxx

Fan xxx

--> Vol xxx

Fan xxx

Vol xxx

--> Fan xxx

(Stop)

Cleaning

DMX set

Addr- xxx

Manual

V100 F100

DMX set

Addr- xxx

*Hold

TimeSet

DMX set

Addr- xxx

1ch.Axxx

VxxxFxxx

2ch.Axxx

VxxxFxxx

4ch.Axxx

VxxxFxxx

DxxxIxxx

4ch.Axxx

VxxxFxxx

Version:

1.0

Warming

Up……

DMX set

Addr- xxx

DUR. xxx

INT. xxx

--> Dura xxx

Intv xxx

Dura xxx

--> Intv xxx

DUR. xxx

INT. xxx

(Stop)

Cleaning

DMX set

Addr- xxx

--> Vol xxx

Fan xxx

--> Vol xxx

Fan xxx

Vol xxx

--> Fan xxx

(Stop)

Cleaning

DMX set

Addr- xxx

Manual

V100 F100

DMX set

Addr- xxx

*Hold

TimeSet

DMX set

Addr- xxx

1ch.Axxx

VxxxFxxx

2ch.Axxx

VxxxFxxx

4ch.Axxx

VxxxFxxx

DxxxIxxx

4ch.Axxx

VxxxFxxx

Version:

1.0

Warming

Up……

DMX set

Addr- xxx

DUR. xxx

INT. xxx

--> Dura xxx

Intv xxx

Dura xxx

--> Intv xxx

DUR. xxx

INT. xxx

(Stop)

Cleaning

DMX set

Addr- xxx

--> Vol xxx

Fan xxx

--> Vol xxx

Fan xxx

Vol xxx

--> Fan xxx

(Stop)

Cleaning

DMX set

Addr- xxx

Manual

V100 F100

DMX set

Addr- xxx

*Hold

TimeSet

DMX set

Addr- xxx

1ch.Axxx

VxxxFxxx

2ch.Axxx

VxxxFxxx

4ch.Axxx

VxxxFxxx

DxxxIxxx

4ch.Axxx

VxxxFxxx

Haze On

Fan xxx

Haze On

Fan xxx

DMX set

Addr - xxx

Haze On

Fan xxx

Haze On

Fan xxx

DMX set

Addr - xxx

Haze On

Fan xxx

Haze On

Fan xxx

DMX set

Addr - xxx

MANUAL HAZING:

1. Press the MANUAL button (without releas-

ing). The machine will output at maximum

level and maximum fan speed. Release the

button to stop hazing.

2. When manual hazing is stopped, the

display will revert back to the DMX display.

Version:

1.0

Warming

Up……

DMX set

Addr- xxx

DUR. xxx

INT. xxx

--> Dura xxx

Intv xxx

Dura xxx

--> Intv xxx

DUR. xxx

INT. xxx

(Stop)

Cleaning

DMX set

Addr- xxx

--> Vol xxx

Fan xxx

--> Vol xxx

Fan xxx

Vol xxx

--> Fan xxx

(Stop)

Cleaning

DMX set

Addr- xxx

Manual

V100 F100

DMX set

Addr- xxx

*Hold

TimeSet

DMX set

Addr- xxx

1ch.Axxx

VxxxFxxx

2ch.Axxx

VxxxFxxx

4ch.Axxx

VxxxFxxx

DxxxIxxx

4ch.Axxx

VxxxFxxx

Manual

Haze F100

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 12 ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 13

DMX Mode:

The Entour Haze Pro has 3 DMX channel modes; 1 channel

mode, 2 channel mode, and 4 channel mode. See page 13 for

the DMX traits.

1. This function will allow you to control each individual fix-

ture’s traits with a standard DMX 512 controller.

2. When the display is showing the DMX setting screen, use

the UP or DOWN buttons to find your desired DMX address.

3. To run your fixture in DMX mode you must FIRST plug in the

fixture via the XLR connections to any standard DMX

controller.

4. Once you have the controller connected to the unit you will

be able to select your desired DMX channel mode. Press the

FUNCTION button to cycle through the DMX channel

modes.

5. When 4 channel mode is selected, after about 5 seconds the

screen will change to the display shown below.

• A = The current DMX address

• V = The current output volume

• F = The current fan speed

• D = The current duration setting

• I = The current interval setting

NOTE: Duration and Interval control is only available in

4 Channel mode.

Entour Haze Pro DMX Mode

Version:

1.0

Warming

Up……

DMX set

Addr- xxx

DUR. xxx

INT. xxx

--> Dura xxx

Intv xxx

Dura xxx

--> Intv xxx

DUR. xxx

INT. xxx

(Stop)

Cleaning

DMX set

Addr- xxx

--> Vol xxx

Fan xxx

--> Vol xxx

Fan xxx

Vol xxx

--> Fan xxx

(Stop)

Cleaning

DMX set

Addr- xxx

Manual

V100 F100

DMX set

Addr- xxx

*Hold

TimeSet

DMX set

Addr- xxx

1ch.Axxx

VxxxFxxx

2ch.Axxx

VxxxFxxx

4ch.Axxx

VxxxFxxx

DxxxIxxx

4ch.Axxx

VxxxFxxx

Version:

1.0

Warming

Up……

DMX set

Addr- xxx

DUR. xxx

INT. xxx

--> Dura xxx

Intv xxx

Dura xxx

--> Intv xxx

DUR. xxx

INT. xxx

(Stop)

Cleaning

DMX set

Addr- xxx

--> Vol xxx

Fan xxx

--> Vol xxx

Fan xxx

Vol xxx

--> Fan xxx

(Stop)

Cleaning

DMX set

Addr- xxx

Manual

V100 F100

DMX set

Addr- xxx

*Hold

TimeSet

DMX set

Addr- xxx

1ch.Axxx

VxxxFxxx

2ch.Axxx

VxxxFxxx

4ch.Axxx

VxxxFxxx

DxxxIxxx

4ch.Axxx

VxxxFxxx

Version:

1.0

Warming

Up……

DMX set

Addr- xxx

DUR. xxx

INT. xxx

--> Dura xxx

Intv xxx

Dura xxx

--> Intv xxx

DUR. xxx

INT. xxx

(Stop)

Cleaning

DMX set

Addr- xxx

--> Vol xxx

Fan xxx

--> Vol xxx

Fan xxx

Vol xxx

--> Fan xxx

(Stop)

Cleaning

DMX set

Addr- xxx

Manual

V100 F100

DMX set

Addr- xxx

*Hold

TimeSet

DMX set

Addr- xxx

1ch.Axxx

VxxxFxxx

2ch.Axxx

VxxxFxxx

4ch.Axxx

VxxxFxxx

DxxxIxxx

4ch.Axxx

VxxxFxxx

Version:

1.0

Warming

Up……

DMX set

Addr- xxx

DUR. xxx

INT. xxx

--> Dura xxx

Intv xxx

Dura xxx

--> Intv xxx

DUR. xxx

INT. xxx

(Stop)

Cleaning

DMX set

Addr- xxx

--> Vol xxx

Fan xxx

--> Vol xxx

Fan xxx

Vol xxx

--> Fan xxx

(Stop)

Cleaning

DMX set

Addr- xxx

Manual

V100 F100

DMX set

Addr- xxx

*Hold

TimeSet

DMX set

Addr- xxx

1ch.Axxx

VxxxFxxx

2ch.Axxx

VxxxFxxx

4ch.Axxx

VxxxFxxx

DxxxIxxx

4ch.Axxx

VxxxFxxx

Version:

1.0

Warming

Up……

DMX set

Addr- xxx

DUR. xxx

INT. xxx

--> Dura xxx

Intv xxx

Dura xxx

--> Intv xxx

DUR. xxx

INT. xxx

(Stop)

Cleaning

DMX set

Addr- xxx

--> Vol xxx

Fan xxx

--> Vol xxx

Fan xxx

Vol xxx

--> Fan xxx

(Stop)

Cleaning

DMX set

Addr- xxx

Manual

V100 F100

DMX set

Addr- xxx

*Hold

TimeSet

DMX set

Addr- xxx

1ch.Axxx

VxxxFxxx

2ch.Axxx

VxxxFxxx

4ch.Axxx

VxxxFxxx

DxxxIxxx

4ch.Axxx

VxxxFxxx

Entour Haze Pro 1 Channel Mode

Channel Value Function

1 OUTPUT VOLUME & FAN SPEED

0 - 4 NO OUTPUT VOLUME

5% FAN SPEED

5 - 255 100% OUTPUT VOLUME

100% FAN SPEED

Entour Haze Pro 2 Channel Mode

Channel Value Function

1 OUTPUT VOLUME

0 - 4 NO OUTPUT VOLUME

5 - 255 100% OUTPUT VOLUME

2 FAN SPEED

0 - 15 5% FAN SPEED

16 - 255 6%-100% FAN SPEED

Channel Value Function

1 OUTPUT VOLUME

0 - 4 NO OUTPUT VOLUME

5 - 255 100% OUTPUT VOLUME

2 FAN SPEED

0 - 15 5% FAN SPEED

16 - 255 6%-100% FAN SPEED

3 DURATION

0 - 7 3 SECONDS

8 - 255 3-250 SECONDS

4 INTERVAL

0 - 9 0 SECONDS

10 - 255 5-250 SECONDS

Entour Haze Pro 4 Channel Mode

Note: In 2 channel mode, when using channel 1 only, the default

fan speed is 30%.

Note: In 4 channel mode, when using channel 1 only, the default

fan speed is 30%.

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 14

The Entour Haze Pro carries a one year (365 days) limited warranty.

Please fill out the enclosed warranty card to validate your purchase.

All returned service items whether under warranty or not, must be

freight pre-paid and accompany a return authorization (R.A.) number.

The R.A. number must be clearly written on the outside of the return

package. A brief description of the problem as well as the R.A. num-

ber must also be written down on a piece of paper and included in

the shipping container. If the unit is under warranty, you must provide

a copy of your proof of purchase invoice. You may obtain a R.A. num-

ber by contacting customer support at (800) 322-6337.

Entour Haze Pro Warranty Registration

Power Connected but no haze is emittied:

1. Check the power supply. Plug the unit into grounded power supply

socket with proper voltage.

2. Disconnect haze machine from power supply. Replace fuse with

one of the same type.

3. Make sure there is sufficient fluid in the tank

4. Make sure the atomization head is not blocked or damaged.

5. Make sure your controller is connected correctly.

6. Check your DMX address setting.

Entour Haze Pro Trouble Shooting

Entour Haze Pro Maintenance

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 15

When storing your machine be sure to store it in a cool area. Cover

the machine so that dust does not build up on the unit. Only run

oil based Haze juice through your machine. Never run plain water,

vinegar, or any other liquid solution through your machine. Running

anything other then oil based Haze juice will severly damage your

machine.

Entour Haze Pro Storage

Before doing maintenance, please make sure that the power is off,

and the power cord is unplugged.

The maintenance should be done by a qualified person.

1. Avoid heavy output.

2. Do not let the fluid get dirty.

3. Prolonged use, flight case side air filter can accumulate dust,

periodically remove the flight case side cover and remove the air

filter to do the cleaning, after cleaning, be sure to dry the air filter

after replacing the flight case again.

4. Clean the directional fan blower regularly.

5. Prolonged use, sponge under the turntable of smoke outlet may

accumulate oil, periodically cleaned out or replaced with a new

sponge.

6. Never operate the unit upside down. Do not store the unit upside

down.

7. Never mix oil based haze fluid and water based fog fluid.

Unplug the unit from any power source it may be connected to. Once

the power has be disconnected, use a flat head screw driver to unscrew

the fuse holder located above the power switch. Remove the bad fuse

and replace with a new one, and screw the fuse holder back in.

Entour Haze Pro Fuse Replacement

Entour Haze Pro Warranty

MANUFACTURER’S LIMITED WARRANTY

A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products

to be free of manufacturing defects in material and workmanship for a prescribed period from

the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the

product is purchased within the United States of America, including possessions and

territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable

evidence, at the time service is sought.

B. For warranty service you must obtain a Return Authorization number (RA#)

before sending back the product–please contact ADJ Products, LLC Service Department

at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All

shipping charges must be pre-paid. If the requested repairs or service (including

parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return

shipping charges only to a designated point within the United States. If the entire instrument is

sent, it must be shipped in it’s original package. No accessories should be shipped with the product. If

any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for

loss of or damage to any such accessories, nor for the safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is modified in any

manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the

product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior

written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because

not properly maintained as set forth in the instruction manual.

D. This is not a service contract, and this warranty does not include maintnance, cleaning or periodic check

up. During the period specified above, ADJ Products, LLC will replace defective parts at its expense

with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by

reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this

warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole

discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August

15, 2012, and bear indentifying marks to that effect.

E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products

without any obligation to include these changes in any products theretofore manufactured.

No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with

products described above. Except to the extent prohibited by applicable law, all implied warranties made

by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness,

are limited in duration to the warranty period set forth above. And no warranties, whether expressed or

implied, including warranties of merchantability or fitness, shall apply to this product after said period

has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is

expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or

damage, direct or consequential, arising out of the use of, or inability to use, this product.

This warranty is the only written warranty applicable to ADJ Products, LLC Products and

supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore

published.

MANUFACTURER’S LIMITED WARRANTY PERIODS:

 •NonL.E.D.LightingProducts=1-year(365days)LimitedWarranty(Such as: Special Effect

Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par

Cans, Trussing, Lighting Stands etc. excluding LED and lamps)

 •LaserProducts=1Year(365Days)LimitedWarranty(excluding laser diodes which have a 6 month

limited warranty)

 •L.E.D.Products=2-year(730days)LimitedWarranty(excluding batteries which have a 180 day lim-

ited warranty). Note:2YearWarrantyonlyappliestopurchaseswithintheUnitedStates.

 •StarTecSeries=1YearLimitedWarranty(excluding batteries which have a 180 day limited warranty).

•ADJDMXControllers=2Year(730Days)LimitedWarranty

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 16 ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 17

Entour Haze Pro Notes