Wahsega Labs WL-SPKR-22-INF-2 Installation guide

Brand
Wahsega Labs
Model
WL-SPKR-22-INF-2
Type
Installation guide

Wahsega Labs WL-SPKR-22-INF-2 is a 2x2 Classroom Ceiling Speaker with InformaCast and SIP that can be used for various purposes. It is PoE (Power-over-Ethernet) capable, so it can be powered using a PoE injector or a PoE capable switch. It has various input and output options, including MIC IN, LINE IN, RELAY, and LAN/POE. The speaker also has an LED indicator to show the status of the device. It is designed and manufactured in the USA and is ROHS compliant. It can operate in industrial temperatures ranging from -40C to +85C.

Wahsega Labs WL-SPKR-22-INF-2 is a 2x2 Classroom Ceiling Speaker with InformaCast and SIP that can be used for various purposes. It is PoE (Power-over-Ethernet) capable, so it can be powered using a PoE injector or a PoE capable switch. It has various input and output options, including MIC IN, LINE IN, RELAY, and LAN/POE. The speaker also has an LED indicator to show the status of the device. It is designed and manufactured in the USA and is ROHS compliant. It can operate in industrial temperatures ranging from -40C to +85C.

2x2 Classroom Ceiling Speaker
with InformaCast® and SIP
Installer’s Guide
Getting Started
This step-by-step guide will help you install your Wahsega
2x2 Classroom Ceiling Speaker with InformaCast® and SIP.
www.wahsega.com Page 2
What You Will Need
PoE power
Power-over-Ethernet (PoE) injector
or
PoE capable switch
Remote communication point
InformaCast Server
Network cable (Cat 5e or Cat 6)
www.wahsega.com Page 3
Wiring Your Wahsega Speaker
Enlarged Area
www.wahsega.com Page 4
SECOND SPEAKER
Connect to a secondary Wahsega speaker up to 20m away via Cat5e or
Cat6 cable.
Straight cable. Cannot be a crossover cable.
WALLPLATE INPUT
Currently unavailable. Coming soon!
TERMINAL BLOCKS
MIC IN +
Unused
MIC IN -
Unused
12 V OUT
Fused, nominal 12V output, max 0.5A. Subject to
power capabilities of PoE.
12 V RTN (GND)
Ground
SPKR -
Unused
SPKR +
Unused
INPUT 4
Unused
RELAY 2: NO
Isolated dry contact closure. Normally Open.
RELAY 2: COM
Isolated dry contact closure. Common.
RELAY 2: NC
Isolated dry contact closure. Normally Closed.
www.wahsega.com Page 5
LINE IN +
Consumer line input level (-10dBV)
LINE IN -
Consumer line input level (+10dBV)
LED 1
Unused
LED 2
Unused
INPUT 1
Contact closure to ground (12 V RTN).
Connect a Panic Button using Input 1 and 12 V RTN
(GND).
INPUT 2
Unused
INPUT 3
Unused
RELAY 1: NO
Isolated dry contact closure. Normally Open.
RELAY 1: COM
Isolated dry contact closure. Common.
RELAY 1: NC
Isolated dry contact closure. Normally Closed.
UNUSED
Not used at this time.
LAN / POE
To use Power-over-Ethernet (PoE), route a Cat 5 or Cat 6 Ethernet cable
through a PoE injector to the LAN/POE port.
Once the unit is successfully powered, the LINK/ACTV indicator
LED will begin to blink.
www.wahsega.com Page 6
Installing in a 2x2 Grid Ceiling
1. Lift earthquake tabs until perpendicular to the speaker frame.
2. Carefully angle and lift speaker and place into ceiling grid.
3. Insure that wires and cables are properly connected.
4. Attach earthquake tabs to secure speaker to structure per local
building and electrical codes.
Earthquake Tab
Power-over-Ethernet (PoE)
www.wahsega.com Page 7
Dimensions
Length and Width
Depth
www.wahsega.com Page 8
Standards Compliant
This product is designed and manufactured in the USA.
US Patent pending.
ROHS compliant
Industrial temperature -40C to +85C.
www.wahsega.com Page 9
2x2 Classroom Ceiling Speaker
with InformaCast and SIP
WL-SPKR-22-INF-1
WL-SPKR-22-INF-2
Installation Guide
Rev A 6.22.2016
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Wahsega Labs WL-SPKR-22-INF-2 Installation guide

Brand
Wahsega Labs
Model
WL-SPKR-22-INF-2
Type
Installation guide

Wahsega Labs WL-SPKR-22-INF-2 is a 2x2 Classroom Ceiling Speaker with InformaCast and SIP that can be used for various purposes. It is PoE (Power-over-Ethernet) capable, so it can be powered using a PoE injector or a PoE capable switch. It has various input and output options, including MIC IN, LINE IN, RELAY, and LAN/POE. The speaker also has an LED indicator to show the status of the device. It is designed and manufactured in the USA and is ROHS compliant. It can operate in industrial temperatures ranging from -40C to +85C.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents