Draper Air Impact Wrench Operating instructions

Brand: Draper

Model: Air Impact Wrench

Category: Power tools

Type: Operating instructions

This manual is also suitable for

Air Impact Wrench, 3/4" Sq. Dr.

Draper Air Impact Wrench

The Draper Air Impact Wrench is a powerful tool designed for the removal and installation of threaded fasteners. With an ultimate torque of 1200Nm, this wrench is capable of tackling even the most stubborn bolts and nuts. The 3/4" square drive anvil provides a secure grip on sockets, ensuring that you can apply maximum force without slippage.

The wrench operates at a maximum air pressure of 90psi (6.2bar) and requires a minimum air line size of 3/8"ID. It has a free speed of 7,000min-1, making it highly efficient for repetitive tasks. The 1/4" BSP air inlet ensures compatibility with most standard air compressors.

Draper Air Impact Wrench

The Draper Air Impact Wrench is a powerful tool designed for the removal and installation of threaded fasteners. With an ultimate torque of 1200Nm, this wrench is capable of tackling even the most stubborn bolts and nuts. The 3/4" square drive anvil provides a secure grip on sockets, ensuring that you can apply maximum force without slippage.

The wrench operates at a maximum air pressure of 90psi (6.2bar) and requires a minimum air line size of 3/8"ID. It has a free speed of 7,000min-1, making it highly efficient for repetitive tasks. The 1/4" BSP air inlet ensures compatibility with most standard air compressors.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

Draper Air Impact Wrench Operating instructions

Brand: Draper

Model: Air Impact Wrench

Category: Power tools

Type: Operating instructions

This manual is also suitable for

Air Impact Wrench, 3/4" Sq. Dr.

Draper Air Impact Wrench

The Draper Air Impact Wrench is a powerful tool designed for the removal and installation of threaded fasteners. With an ultimate torque of 1200Nm, this wrench is capable of tackling even the most stubborn bolts and nuts. The 3/4" square drive anvil provides a secure grip on sockets, ensuring that you can apply maximum force without slippage.

The wrench operates at a maximum air pressure of 90psi (6.2bar) and requires a minimum air line size of 3/8"ID. It has a free speed of 7,000min-1, making it highly efficient for repetitive tasks. The 1/4" BSP air inlet ensures compatibility with most standard air compressors.

Download PDF

in other languages

Nederlands: Draper Air Impact Wrench Handleiding

Related papers

Other documents