Magnadyne MV-VS2 Installation guide

Category
Patch panels
Type
Installation guide
Model: MV-VS2
Installation and User Manual
The MV
-VS2 is a mechanical video and audio switching device used to increase the number of inputs to the Mobile Video System
providing greater system flexibility and ease of use. Follow the enclosed diagrams to make proper connections.
MV-VS2-INS Rev. A 5-4-06
© 2006 Copyright Magnadyne Corporation
Installation
The MV-VS2 has 3-way mounting capability. It can be mounted
under the dash or under a ledge, on the floor or on top of a ledge
and it can also be panel mounted in a cabinet, console or wall.
Installation Notes:
1. Choose a mounting location that provides easy access by
the end user.
2. Choose a solid mounting surface that will withstand the
pulling and pushing force when the end user is plugging in
and disconnecting devices.
3. If panel mounting, follow the recommendations enclosed.
The mounting surface must be able to withstand the pulling
and pushing force associated with insertion and removal of
the RCA connectors.
Surface Mounting:
Use the “L” brackets provided to secure the MV-VS2 into place.
The brackets can be placed at the top of the MV-VS2 cabinet for
under dash or under ledge mounting or at the bottom of the cab-
inet for floor or surface mounting. DO NOT mount the MV-VS2
on uneven surfaces which will cause the brackets or chassis to
bend or flex excessively.
Panel Mounting:
1. Attach the “L” brackets supplied to the side of the MV-VS2 hous-
ing using the screws provided.
2. Follow the template enclosed and cut the proper size hole in the
mounting area.
3. Make all the necessary cable connections to the rear of the unit
and then place the MV-VS2 into the mounting hole and secure it
with self-tapping wood or metal screws (not supplied).
4. Place the surface mount trim ring over the front of the MV-VS2
make sure that the tabs on the trim ring enter the slots on the
“L” brackets. Push the trim ring into position until it stops on the
mounting surface.
INPUT SELECT
AV
1 INPUT
AV
3 INPUT
AV
1 INPUT
AV
2 INPUT
3 So
urc
e A
/V
Select
or
Swi
tch
MV-
VS2
V
R
L
INPUT SELECT
AV
1 INPUT
AV
3 INPUT
AV
1 INPUT
AV
2 INPUT
3 So
urc
e A
/V
Sel
ect
or
Swi
tch
MV-
VS2
V
R
L
INPUT SELECT
AV
1 INPUT
AV
3 INPUT
AV
1 INPUT
AV
2 INPUT
3 So
urc
e A
/V
Sel
ect
or
Swi
tch
MV-
VS2
V
R
L
5
1
/4"
1
9
/16"
Cut out for trim ring tabs
Under Dash Mounting
Surface Mounting
Hole Opening
INPUT SELECT
AV
1 INPUT
AV
3 INPUT
AV
1 INPUT
AV
2 INPUT
3 So
urc
e A
/V
Sel
ect
or
Swi
tch
MV-
VS2
V
R
L
1
2
Panel Mounting
Installation and User Manual
Model: MV-VS2
Connection and Operation
1. A 6 foot long RCA male patch cord is provided with the MV-
VS2 to make the connection from the MV-VS2 output on the
rear panel to the Mobile Video System Screen. Some installa-
tions may require a longer cable which can be purchased at a
local electronics store.
2. Both “Rear Aux Inputs” of the MV-VS2 are typically reserved
for permanent items that will not be removed from the vehicle
such as a video game controller, VCD or second DVD.
3. The front panel connection is typically for non-permanent
items that will be removed from the vehicle such as a video
game controller or camcorder.
4. The 3 position switch on the front panel is used to select the
signal source to the Mobile Video system.
RCA Male Patch Cord
Supplied
POWER SUPPLY
Supplied with
Some MV Systems
VR
L
AV 2 INPUT
AV 3 INPUT
VR
L
AV OUTPUT
LINE
OUT
A
UDIO
R
L
VIDEO
Permanent Item:
DVD,
Video Game
AUDIO OUT
Connect Red White Male RCA Connectors from
patch cord connected to MV-VS2 Rear Aux Input
connectors
VIDEO OUT
Connect Yellow Male RCA Connector from patch cord
connected to MV-VS2 Rear Aux Input connectors
RCA Male Patch Cord
Not Supplied
Not Supplied
LINE
OUT
AUDIO
R
L
VIDEO
Permanent Item:
DVD,
Video Game
Not Supplied
Supplied (MV-VS2)
MV VS2 Rear Panel
Auxiliary 2
Auxiliary 3
Industry Standard Color Code:
Yellow . . . Video Signal
Red = . . . Right Audio Signal
White = . . Left Audio Signal
All the connectors on the MV-VS2 are female
RCA type with industry standard color code
indication. Any device to be connected to the
MV-VS2 will require a 3 conductor Male-to-
Male RCA jumper cable that will either be
supplied with the device or can be purchased
at a local electronics store.
VIDEO GAME
Not Supplied
CAMCORDER
Not Supplied
AV 1 INPUT
AV 3 INPUT
AV 1 INPUT
AV 2 INPUT
Signal
Source
Switch
Front Panel
INPUT SELECT
or
3 S
ource A/V Selector Switch
MV-VS2
  • Page 1 1
  • Page 2 2

Magnadyne MV-VS2 Installation guide

Category
Patch panels
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI