Philips 273P3LPHEB/00 User manual

Brand: Philips

Model: 273P3LPHEB/00

Category: TVs & monitors

Type: User manual

This manual is also suitable for

www.philips.com/welcome

EN User manual 1

Customer care and warranty 22

Troubleshooting & FAQs 28

273P3L

Brilliance

1. Important ................................................1

1.1 Safety precautions and maintenance ...1

1.2 Notational Descriptions .............................2

1.3 Disposal of product and packing

material ................................................................3

2. Setting up the monitor .........................4

2.1 Installation ...........................................................4

2.2 Operating the monitor ...............................4

2.3 Remove Base Stand and Base .................7

3. Image Optimization ...............................8

3.1 SmartImage ........................................................8

3.2 SmartContrast .................................................9

4. Power Sensor™ ..................................10

5. Technical Specifications ......................12

5.1 Resolution & Preset Modes...................14

6. Power Management ............................15

7. Regulatory Information ......................16

8. Customer care and warranty ...........22

8.1 Philips’ Flat Panel Monitors Pixel

Defect Policy ..................................................22

8.2 Customer Care & Warranty .................24

9. Troubleshooting & FAQs ...................28

9.1 Troubleshooting ...........................................28

9.2 General FAQs ...............................................30

Table of Contents

1. Important

This electronic user’s guide is intended for

anyone who uses the Philips monitor. Take time

to read this user manual before you use your

monitor. It contains important information and

notes regarding operating your monitor.

The Philips guarantee applies provided the

product is handled properly for its intended use,

in accordance with its operating instructions

and upon presentation of the original invoice

or cash receipt, indicating the date of purchase,

dealer’s name and model and production

number of the product.

1.1 Safety precautions and mainte-

nance

Warnings

Use of controls, adjustments or procedures

other than those specified in this documentation

may result in exposure to shock, electrical

hazards and/or mechanical hazards.

Read and follow these instructions when

connecting and using your computer monitor.

Operation

• Risk of electric shock or fire!

• Keep the monitor out of direct sunlight

and away from stoves or any other heat

source.

• Remove any object that could fall into

ventilation holes or prevent proper cool-

ing of the monitor’s electronics.

• Do not block the ventilation holes on the

cabinet.

• When positioning the monitor, make

sure the power plug and outlet are easily

accessible.

• If turning off the monitor by detaching the

power cable or DC power cord, wait for 6

seconds before attaching the power cable

or DC power cord for normal operation.

• Please use approved power cord provided

by Philips all the time. If your power cord

is missing, please contact with your local

service center. (Please refer to Customer

Care Consumer Information Center.)

• Do not subject the monitor to severe

vibration or high impact conditions during

operation.

• Do not knock or drop the monitor during

operation or transportation.

Maintenance

• To protect your monitor from possible

damage, do not put excessive pressure

on the Monitor panel. When moving your

monitor, grasp the frame to lift; do not lift

the monitor by placing your hand or fingers

on the Monitor panel.

• Unplug the monitor if you are not going to

use it for an extensive period of time.

• Unplug the monitor if you need to clean it

with a slightly damp cloth. The screen may

be wiped with a dry cloth when the power

is off. However, never use organic solvent,

such as, alcohol, or ammonia-based liquids

to clean your monitor.

• To avoid the risk of shock or permanent

damage to the set, do not expose the

monitor to dust, rain, water, or excessive

moisture environment.

• If your monitor gets wet, wipe it with dry

cloth as soon as possible.

• If foreign substance or water gets in

your monitor, please turn the power off

immediately and disconnect the power

cord. Then, remove the foreign substance

or water, and send it to the maintenance

center.

• Do not store or use the monitor in

locations exposed to heat, direct sunlight or

extreme cold.

1.Important

• In order to maintain the best performance

of your monitor and use it for a longer life-

time, please use the monitor in a location

that falls within the following temperature

and humidity ranges.

Temperature: 0-40°C 32-95°F

Humidity: 20-80% RH

• IMPORTANT: Always activate a moving

screen saver program when you leave

your monitor unattended. Always activate

a periodic screen refresh application

if your monitor will display unchanging

static content. Uninterrupted display of

still or static images over an extended

period may cause "burn in", also known as

"after-imaging" or "ghost imaging", on your

screen. "Burn-in", "after-imaging", or "ghost

imaging" is a well-known phenomenon in

Monitor panel technology. In most cases,

the "burned in" or "after-imaging" or "ghost

imaging" will disappear gradually over a

period of time after the power has been

switched off.

Warning

Severe” burn-in” or “after-image” or “ghost

image” symptoms will not disappear and cannot

be repaired. The damage mentioned above is

not covered under your warranty.

Service

• The casing cover should be opened only

by qualified service personnel.

• If there is any need for any document for

repair or integration, please contact with

your local service center. (please refer to

the chapter of "Consumer Information

Center")

• For transportation information, please refer

to "Technical Specifications".

• Do not leave your monitor in a car/trunk

under direct sun light.

Note

Consult a service technician if the monitor

does not operate normally, or you are not sure

what procedure to take when the operating

instructions given in this manual have been

followed.

1.2 Notational Descriptions

The following subsections describe notational

conventions used in this document.

Notes, Cautions and Warnings

Throughout this guide, blocks of text may be

accompanied by an icon and printed in bold or

italic type. These blocks contain notes, cautions

or warnings. They are used as follows:

Note

This icon indicates important information and

tips that help you make better use of your

computer system.

Caution

This icon indicates information that tells you

how to avoid either potential damage to

hardware or loss of data.

Warning

This icon indicates the potential for bodily harm

and tells you how to avoid the problem.

Some warnings may appear in alternate formats

and may not be accompanied by an icon. In such

cases, the specific presentation of the warning is

mandated by the relevant regulatory authority.

1.Important

1.3 Disposal of product and packing

material

Waste Electrical and Electronic Equipment -

WEEE

This marking on the product or on its

packaging illustrates that, under European

Directive 2012/19/EU governing used electrical

and electronic appliances, this product may

not be disposed of with normal household

waste. You are responsible for disposal of

this equipment through a designated waste

electrical and electronic equipment collection.

To determine the locations for dropping off

such waste electrical and electronic, contact

your local government office, the waste disposal

organization that serves your household or the

store at which you purchased the product.

Your new monitor contains materials that can

be recycled and reused. Specialized companies

can recycle your product to increase the

amount of reusable materials and to minimize

the amount to be disposed of.

All redundant packing material has been

omitted. We have done our utmost to make the

packaging easily separable into mono materials.

Please find out about the local regulations on

how to dispose of your old monitor and packing

from your sales representative.

Taking back/Recycling Information for

Customers

Philips establishes technically and economically

viable objectives to optimize the environmental

performance of the organization's product,

service and activities.

From the planning, design and production

stages, Philips emphasizes the important of

making products that can easily be recycled. At

Philips, end-of-life management primarily entails

participation in national take-back initiatives

and recycling programs whenever possible,

preferably in cooperation with competitors,

which recycle all materials (products and related

packaging material) in accordance with all

Environmental Laws and taking back program

with the contractor company.

Your display is manufactured with high quality

materials and components which can be

recycled and reused.

To learn more about our recycling

program please visit: http://www.philips.

com/sites/philipsglobal/about/sustainability/

ourenvironment/productrecyclingservices.page.

1.Important

Connect to PC

1. Turn off your computer and unplug its

power cord.

2. Connect the VGA or DVI or HDMI signal

cable for video connection.

3. Connect the Audio cable for audio

connection.

4. Connect the USB upstream port on

the monitor and the USB port on your

computer with a USB cable. The USB

downstream port is now ready for any

USB device to plug in.

5. Plug the power cord into a nearby AC

power outlet.

6. Turn on your computer and monitor. If the

monitor displays images, the installation is

done.

2.2 Operating the monitor

Front view product description

To access the OSD menu

Return to previous OSD level.

Power sensor

To switch monitor’s power ON

and OFF.

To adjust the OSD menu.

To adjust volume of the display.

2. Setting up the monitor

2.1 Installation

273P3L

Package contents

VGA (optional) DVI (optional)

HDMI (optional)

273P3L

www.philips.com/welcome

Quick

Start

2012

使用产品前请阅读使用说明

保留备用

user s manual

Connecting to your PC

6 7 843

Kensington anti-thief lock

AC power input

HDMI input

DVI-D input

VGA input

Audio input & Earphone jack

USB upstream

USB downstream

2. Setting up the monitor

SmartImage. There are 6 modes

to be selected: Office, Photo,

Movie, Game, Economy, Off.

Description of the On Screen Display

What is On-Screen Display (OSD)?

On-Screen Display (OSD) is a feature in all

Philips Monitors. It allows an end user to adjust

screen performance or select functions of

the monitors directly through an on-screen

instruction window. A user friendly on screen

display interface is shown as below:











 



Basic and simple instruction on the control

keys

In the OSD shown above, users can press

buttons at the front bezel of the monitor to

move the cursor, or press OK to confirm the

choice or adjustment.

The OSD Menu

Below is an overall view of the structure of

the On-Screen Display. You can use this as a

reference when you want to work your way

around the different adjustments later on.

Main menu Sub menu

Auto

Input

VGA

DVI

HDMI

Power Sensor

0, 1, 2, 3, 4

Off

Audio

Stand Alone

On, Off

Mute

Picture

Wide Screen, 4:3

0~100

On, Off

1.8, 2.0, 2.2, 2.4, 2.6

Picture Format

Brightness

Contrast

SmartContrast

Off, Fast , Faster, Fastest

SmartResponse

Gamma

OSD Settings

0~100

Off, 1, 2, 3, 4

5, 10, 20, 30, 60

Horizontal

Vertical

Transparency

OSD Time out

Setup

0~100

On, Off

Yes, No

0~100

On, Off

H. Position

V. Position

Over Scan

Resolution Notification

Reset

Information

Language

English

Español, Français, Deutsch, Italiano,

Português,

Русский

简体中文

Color

5000K, 6500K, 7500K, 8200K,

9300K, 11500K

Red: 0~100

Green: 0~100

Blue: 0~100

Color Temperature

sRGB

User Define

0~100

Phase

Clock

2. Setting up the monitor

Resolution notification

This monitor is designed for optimal

performance at its native resolution, 1920 x

1080 at 60 Hz. When the monitor is powered

on at a different resolution, an alert is displayed

on screen: Use 1920 x 1080 at 60 Hz for best

results.

Display of the native resolution alert can be

switched off from Setup in the OSD (On

Screen Display) menu.

Physical Function

Tilt

Swivel

-65

Pivot

0°

90°

Height adjustment

110mm

2. Setting up the monitor

2.3 Remove Base Stand and Base

Remove the Base

Condition:

•

For VESA standard mounting applications.

273P3L

1. Remove the 4 screws.

2. Remove the base from the monitor.

Note

This monitor accepts a 100mm x 100mm

VESA-Compliant mounting interface.

100mm

2. Setting up the monitor

3. Image Optimization

3.1 SmartImage

What is it?

SmartImage provides presets that optimize

display for different types of content, dynamically

adjusting brightness, contrast, color and

sharpness in real time. Whether you're working

with text applications, displaying images or

watching a video, Philips SmartImage delivers

great optimized monitor performance.

Why do I need it?

You want a monitor that delivers optimized

display all your favorite types of content,

SmartImage software dynamically adjust

brightness, contrast, color and sharpness in

real time to enhance your monitor viewing

experience.

How does it work?

SmartImage is an exclusive, leading edge Philips

technology that analyzes the content displayed

on your screen. Based on a scenario you select,

SmartImage dynamically enhances the contrast,

color saturation and sharpness of images to

enhance the contents being displayed - all in

real time with the press of a single button.

How to enable SmartImage?

1. Press to launch the SmartImage on

screen display.

2. Keep pressing to toggle between

Office, Photo, Movie, Game, Economy and

Off.

3. The SmartImage on screen display will

remain on screen for 5 seconds, or you can

also press "OK" to make confirmation.

There are six modes to select: Office, Photo,

Movie, Game, Economy and Off.















• Office: Enhances text and dampens

brightness to increase readability and

reduce eye strain. This mode significantly

enhances readability and productivity when

you’re working with spreadsheets, PDF files,

scanned articles or other general office

applications.

• Photo: This profile combines color

saturation, dynamic contrast and sharpness

enhancement to display photos and other

images with outstanding clarity in vibrant

colors - all without artifacts and faded

colors.

• Movie: Ramped up luminance, deepened

color saturation, dynamic contrast and

razor sharpness displays every details in

darker areas of your videos without color

washout in brighter areas maintaining a

dynamic natural values for the ultimate

video display.

• Game: Turn on over drive circuit for best

response time, reduce jaggy edges for fast

moving objects on screen, enhance contrast

3. Image Optimization

ratio for bright and dark scheme, this

profile delivers the best gaming experience

for gamers.

• Economy: Under this profile, brightness,

contrast are adjusted and backlighting

finetuned for just right display of everyday

office applications and lower power

consumption.

• Off: No optimization by SmartImage.

3.2 SmartContrast

What is it?

Unique technology that dynamically analyzes

displayed content and automatically optimizes

a Monitor's contrast ratio for maximum visual

clarity and viewing enjoyment, stepping up

backlighting for clearer, crisper and brighter

images or dimming backlighting for clear display

of images on dark backgrounds.

Why do I need it?

You want the very best visual clarity and

viewing comfort for every type of content.

SmartContrast dynamically controls contrast

and adjusts backlighting for clear, crisp, bright

gaming and video images or displays clear,

readable text for office work. By reducing your

monitor's power consumption, you save on

energy costs and extend the lifetime of your

monitor.

How does it work?

When you activate SmartContrast, it will analyse

the content you are displaying in real time to

adjust colors and control backlight intensity. This

function will dynamically enhance contrast for a

great entertainment experience when viewing

videos or playing games.

3. Image Optimization

4. Power Sensor™

PowerSensor is a unique environmentally friendly technology from Philips which enables user to save

up to 80% of power consumption. In line with Philip’s Sense and Simplicity drive, this user friendly

technology works for you right out of the box without any hardware or software installation, and

without any user intervention in the default mode.

How does it work?

• PowerSensor works on principle of transmission and reception of harmless “infrared” signals in

order to detect user-presence.

• When the user is in front of the monitor the monitor operates normally, at the predetermined

settings that the user has set- i.e. Brightness, contrast, color, etc.

• Assuming that the monitor was set to 100% of brightness for exam-

ple, when the user leaves his seat and is no longer in front of the moni-

tor, the monitor automatically reduces the power consumption upto 80%.

Setting

Default settings

PowerSensor is designed to detect the presence of the user located between 30 and 100 cm (12

and 40 inches) from the display and within five degrees left or right of the monitor.

Custom settings

• If you prefer to be in a position outside the perimeters listed above, choose a higher strength

signal for optimal detection efficiency: The higher the setting, the stronger the detection signal.

For maximum PowerSensor efficiency and proper detection, please position yourself directly in

front of your monitor.

• If you choose to position yourself more than 100 cm or 40 inches from the monitor use the

maximum detection signal for distances up to 120cm or 47 inches. (setting 4)

• Since some dark colored clothing tends to absorb infrared signals even when the user is within

100 cm or 40 inches of the display, step up signal strength when wearing black or other dark-

garb.

4. Power Sensor

•

Power Sensor

ATTENTION

Power Sensor off

How to adjust settings

If PowerSensor is not operating correctly inside or outside the default range, here’s how to fine-tune

detection:

• Press the PowerSensor hot key

• You will find the adjustment bar.

• Adjust the PowerSensor detection adjustment to Setting 4 and press OK.

• Test the new setup to see if PowerSensor properly detects you in your current position.

• PowerSensor function is designed to work in Landscape mode (horizontal position) only. After

PowerSensor turn on, it will automatically turn Off if the monitor is used in Portrait mode (90

degree/ vertical position); it will automatically turn ON if monitor is returned to its default

Landscape position.

Note

A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the

default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for

some reason, please adjust to a lower signal strength.

4. Power Sensor

5. Technical Specifications

273P3L

Picture/Display

Monitor panel type TFT-LCD

Backlight LED

Panel size 27" W (68.6 cm)

Aspect ratio 16:9

Pixel Pitch

0.31 x 0.31 mm

SmartContrast 20,000,000:1

Response time (typical) 1 ms

Optimum Resolution 1920x1080 @ 60Hz

Viewing angle 170° (H) / 160° (V) @ C/R > 10

Picture Enhancement SmartImage Premium

Display colors 16.7 M

Vertical refresh rate 56Hz -76Hz

Horizontal Frequency 30kHz - 83kHz

sRGB YES

Connectivity

Signal input DVI (digital), VGA (Analog),HDMI

Input Signal Separate Sync, Sync on Green

Convenience

User Convenience Smartimage/ , Volume/ , Power On/Off ,Sensor/back, Menu

(OK)

OSD Languages English, French, German, Italian, Russian, Spanish, Simplified

Chinese, Portuguese

Plug & Play Compatibility DDC/CI, sRGB, Windows 7/Vista/XP, Mac OSX, Linux

Stand

Tilt -5 / +20

Swivel -65/+65

Height adjustment 110mm

Power

On mode 27.3W(typ), 48.2W(max)

On mode(Eco mode) 16.7W(typ)

Energy Consumption

(EnergyStar 5.0 test method)

AC Input Voltage at

100VAC +/-5VAC,

50Hz +/-3Hz

AC Input Voltage at

115VAC +/-5VAC,

60Hz +/-3Hz

AC Input Voltage at

230VAC +/-5VAC,

50Hz +/-3Hz

Normal Operation (typcial) 20.4W 20.5W 20.6W

Sleep 0.5W 0.5W 0.5W

Off 0.3W 0.3W 0.3W

Heat Dissipation* AC Input Voltage at

100VAC +/-5VAC,

50Hz +/-3Hz

AC Input Voltage at

115VAC +/-5VAC,

60Hz +/-3Hz

AC Input Voltage at

230VAC +/-5VAC,

50Hz +/-3Hz

Normal Operation 103.2 BTU/hr 102.9 BTU/hr 103.7 +BTU/hr

5. Technical Specications

Sleep 0.546 BTU/hr 0.546 BTU/hr 0.683 BTU/hr

Off 0.512 BTU/hr 0.546 BTU/hr 0.614 BTU/hr

Power LED indicator On mode: White, Standby/Sleep mode: White (blinking)

Power Supply Build-in, 100-240VAC, 50/60Hz

Dimension

Product with stand (WxHxD) 642 x 528 x 244 mm

Product without stand

(WxHxD)

642 x 391 x 65 mm

Weight

Product with stand 7.79 kg

Product without stand 5.40 kg

Product with packaging 9.79 kg

Operating Condition

Temperature range (operation) 0°C to 40 °C

Temperature range (Non-

operation)

-20°C to 60°C

Relative humidity 20% to 80%

Altitude Operation: + 12,000 ft ( 3,658 m)

Non-operation: + 40,000 ft ( 12,192 m)

Environmental

ROHS YES

EPEAT Gold (www.epeat.net)

Packaging 100% recyclable

Specific Substances PVC/BFR Free

for User Accessible Parts (Excluding Cables and

Adaptors)

Compliance and standards

Regulatory Approvals CE Mark, FCC Class B, CU-EAC, SEMKO, TCO5.1, UL/cUL,TUV

Ergo, TUV/GS,BSMI

Cabinet

Color Black/Silver

Finish Texture

Note

1. EPEAT Gold or Silver is valid only where Philips registers the product.

Please visit www.epeat.net for registration status in your country.

2. This data is subject to change without notice.

Go to www.philips.com/support to download the latest version of leaflet.

3. This monitor is brominated flame retardant and polyvinyl chloride-free (PVC/BFR free) for all user

accessible parts (excluding cables and adaptors). Organobromine compounds in the form of flame

retardants must not be used in those portions equal to or greater than 0.09%(900ppm maximum

of Bromine) and organobromine compounds in the form of polyvinyl chloride or polyvinyl chloride

congeners must not be used in those portions equal to or greater than 0.1% (1000ppm maximum of

Chlorine).

5. Technical Specications

5.1 Resolution & Preset Modes

Maximum Resolution

1920 x 1080 at 60 Hz (analog input)

1920 x 1080 at 60 Hz (digital input)

Recommended Resolution

1920 x 1080 at 60 Hz (digital input)

H. freq (kHz) Resolution V. freq (Hz)

31.47 720x400 70.09

31.47 640x480 59.94

35.00 640x480 66.67

37.86 640x480 72.81

37.50 640x480 75.00

37.88 800x600 60.32

46.88 800x600 75.00

48.36 1024x768 60.00

60.02 1024x768 75.03

63.89 1280x1024 60.02

79.98 1280x1024 75.03

55.94 1440x900 59.89

70.64 1440x900 74.98

65.29 1680x1050 59.95

67.50 1920x1080 60.00

Note

Please notice that your display works best at

native resolution of 1920 X 1080@60Hz. For

best display quality,please follow this resolution

recommendation.

5. Technical Specications

6. Power Management

If you have VESA DPM compliance display card

or software installed in your PC, the monitor

can automatically reduce its power consumption

when not in use. If an input from a keyboard,

mouse or other input device is detected,

the monitor will 'wake up' automatically. The

following table shows the power consumption

and signaling of this automatic power saving

feature:

Power Management Definition

VESA Mode Video H-sync V-sync Power Used LED color

Active ON Ye s Yes

< 27.3 W (typ.)

< 48.2W(max)

White

Sleep OFF No No < 0.5 W (typ.)

White

(blinking)

Switch Off OFF - - < 0.3 W (typ.) OFF

The following setup is used to measure power

consumption on this monitor.

• Native resolution: 1920 x 1080

• Contrast: 50%

• Brightness: 100%

• Color temperature: 6500k with full white

pattern

Note

This data is subject to change without notice.

6.Power Management

7. Regulatory Information

Lead-free Product

Lead free display promotes

environmentally sound recovery

and disposal of waste from electrical

and electronic equipment. Toxic

substances like Lead has been eliminated

and compliance with European community’s

stringent RoHs directive mandating restrictions

on hazardous substances in electrical and

electronic equipment have been adhered to

in order to make Philips monitors safe to use

throughout its life cycle.

Congratulations!

This display is designed for both you and the

planet.

TCO Development works for

sustainable IT - manufacture,

use and recycling of IT products

reflecting environmental, social and economic

responsibility.

TCO Certified is a third party verified program,

where every product model is tested by an

accredited impartial test laboratory. TCO

Certified represents one of the toughest

certifications for ICT products worldwide.

Some of the Usability features of TCO

Certified Displays:

• Visual Ergonomics for image quality

is tested to ensure top performance

and reduce sight and strain problems.

Important parameters are Resolution,

Luminance, Contrast, Reflection and Colour

characteristics

• Products are tested according to rigorous

safety standards at impartial laboratories

• Electric and magnetic fields emissions as

low as normal household background levels

• Workload ergonomics to ensure a good

physical environment

Some of the Environmental features of TCO

Certified Displays:

• Production facilities have an Environmental

Management System (EMAS or ISO 14001)

• Low energy consumption to minimize

climate impact

• Restrictions on Chlorinated and

Brominated flame retardants, plasticizers,

plastics and heavy metals such as cadmium,

mercury and lead (RoHS compliance)

• Both product and product packaging is

prepared for recycling

• The brand owner offers take-back options

Corporate Social Responsibility

• The brand owner demonstrates the

product is manufactured under working

practices that promote good labour

relations and working conditions.

The Criteria Document can be downloaded

from our web site. The criteria included in

this label have been developed by TCO

Development in co-operation with scientists,

experts, users as well as manufacturers all

over the world. Since the end of the 1980s

TCO has been involved in influencing the

development of IT equipment in a more user

and environmentally friendly direction. Our ICT

product labeling system began in 1992 and is

now requested by users and ICT-manufacturers

all over the world.

For displays with glossy bezels, the user should

consider the placement of the display as the

bezel may cause disturbing reflections from

surrounding light and bright surfaces.

For more information, please visit: www.

tcodevelopment.com

Technology for you and the planet

(Only for selective models)

User mode is used for TCO Certified

compliance.

7. Regulatory Information

EPEAT

(www.epeat.net)

“The EPEAT (Electronic Product

Environmental Assessment Tool)

program evaluates computer

desktops, laptops, and monitors

based on 51 environmental criteria developed

through an extensive stakeholder consensus

process supported by US EPA.

EPEAT system helps purchasers in the public

and private sectors evaluate, compare and

select desktop computers, notebooks and

monitors based on their environmental

attributes. EPEAT also provides a clear and

consistent set of performance criteria for the

design of products, and provides an opportunity

for manufacturers to secure market recognition

for efforts to reduce the environmental impact

of its products.”

Benefits of EPEAT

Reduce use of primary materials.

Reduce use of toxic materials.

Avoid the disposal of hazardous waste EPEAT’S

requirement that all registered products meet

ENERGY STAR’s energy efficiency specifications,

means that these products will consume less

energy throughout their life.

CE Declaration of Conformity

This product is in conformity with the following

standards:

• EN60950-1:2006 (Safety requirement of

Information Technology Equipment).

• EN55022:2006 (Radio Disturbance

requirement of Information Technology

Equipment).

• EN55024:1998+A1:2001+A2:2003

(Immunity requirement of Information

Technology Equipment).

• EN61000-3-2:2006 (Limits for Harmonic

Current Emission).

• EN61000-3-3:1995+A1:2001+A2:2005

(Limitation of Voltage Fluctuation and

Flicker) following provisions of directives

applicable.

• EN50581:2012 (Technical documentation

for the assessment of electrical and

electronic products with respect to the

restriction of hazardous substances).

• EN50564:2011 (Electrical and electronic

household and office equipment —

Measurement of low power consumption).

• 2006/95/EC (Low Voltage Directive).

• 2004/108/EC (EMC Directive).

• 2009/125/EC (EuP Directive, EC No.

1275/2008 mplementing Directive

for Standby and Off mode power

consumption) and is produced by a

manufacturing organization on ISO9000

level.

• 2011/65/EU (RoHS Directive)

The product also comply with the following

standards:

• ISO9241-307:2008 (Ergonomic

requirement, Analysis and compliance test

methods for electronic visual displays).

• GS EK1-2000:2013 (GS mark requirement).

7. Regulatory Information

• prEN50279:1998 (Low Frequency Electric

and Magnetic fields for Visual Display).

• MPR-II (MPR:1990:8/1990:10 Low

Frequency Electric and Magnetic fields).

• TCO CERTIFIED (Requirement for

Environment Labeling of Ergonomics,

Energy, Ecology and Emission, TCO:

Swedish Confederation of Professional

Employees) for TCO versions.

Energy Star Declaration

(www.energystar.gov)

As an ENERGY STAR

Partner, we

have determined that this product

meets the ENERGY STAR

guidelines for energy efficiency.

Note

We recommend you switch off the monitor

when it is not in use for a long time.

Federal Communications Commission (FCC)

Notice (U.S. Only)

This equipment has been tested and found

to comply with the limits for a Class B

digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to

provide reasonable protection against

harmful interference in a residential

installation. This equipment generates, uses

and can radiate radio frequency energy

and, if not installed and used in accordance

with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does cause

harmful interference to radio or television

reception, which can be determined by

turning the equipment off and on, the

user is encouraged to try to correct

the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced

radio/TV technician for help.

Changes or modifications not expressly

approved by the party responsible for

compliance could void the user's authority

to operate the equipment.

Use only RF shielded cable that was supplied

with the monitor when connecting this monitor

to a computer device.

To prevent damage which may result in fire or

shock hazard, do not expose this appliance to

rain or excessive moisture.

THIS CLASS B DIGITAL APPARATUS MEETS

ALL REQUIREMENTS OF THE CANADIAN

INTERFERENCE-CAUSING EQUIPMENT

REGULATIONS.

FCC Declaration of Conformity

Declaration of Conformity for Products Marked

with FCC Logo.

United States Only

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that

may cause undesired operation.

Commission Federale de la Communication

(FCC Declaration)

Cet équipement a été testé et déclaré

conforme auxlimites des appareils

numériques de class B,aux termes de

l'article 15 Des règles de la FCC. Ces

limites sont conçues de façon à fourir

une protection raisonnable contre les

interférences nuisibles dans le cadre d'une

7. Regulatory Information

Page is loading ...

Philips 273P3LPHEB/00 User manual

Brand: Philips

Model: 273P3LPHEB/00

Category: TVs & monitors

Type: User manual

This manual is also suitable for

Download PDF

report

Philips 273P3LPHEB/00 User manual

This manual is also suitable for

Philips 273P3LPHEB/00 User manual

Related papers

Other documents