Pyle PLCM22IR Owner's manual

Category
Security cameras
Type
Owner's manual

Pyle PLCM22IR is a backup camera system designed to assist drivers in detecting hazardous driving conditions, obstructions, and large stationary objects while reversing. It features a digital camera with low-lux lighting performance, providing enhanced visibility in low-light conditions. The system includes a yellow RCA video connector cable for easy connection to a compatible display monitor, automatically retrieving the video signal when the vehicle is shifted into reverse.

Pyle PLCM22IR is a backup camera system designed to assist drivers in detecting hazardous driving conditions, obstructions, and large stationary objects while reversing. It features a digital camera with low-lux lighting performance, providing enhanced visibility in low-light conditions. The system includes a yellow RCA video connector cable for easy connection to a compatible display monitor, automatically retrieving the video signal when the vehicle is shifted into reverse.

WARNING:Failuretoreadandfollowthesewarningsandinstructionsmayresultinseriousinjury,includingdamaged
property,sopleasepaycloseattentionandexhibittheutmostcare.
The Digital Backup Camera is designed as an aid to the driver in detecting potentially hazardous driving conditions,
obstructions,andlargestationaryobjects.You,thedriver,mustalsoremembertodrivesafelyandproperly.Useofthe
DigitalBackupCameraisnotasubstituteforsafe,properandlegaldrivingpractices.
Neverbackupwhilelookingonly atyourconnectedmonitordisplayscreen.Youshouldalwayscheck
behindandaround
thevehiclewhenbacki ngupjustasyouwouldifthevehicledidnothavetheDigitalBackupCamera.Alwaysmakesure
yourdrivingareaisclear.Alwaysbackupslowlyandwithcaution.
NeverdependontheBackupCameraentirelywhenbackingup.Theimage
onthemonitordisplayscreenmaybeslightly
different from actual and realͲtime conditions. Objects viewed in the rear view monitor differ from actual distances
becauseawideͲanglelensisused.Sousethecameraasanaidandalwaysfollowintendeddrivingpracticestoproperly
judgedistancesfrom
objects.
TheBackupCamera'sassistedlowluxlightingperformancefeatureisalsoanaidtoadriver .Alwaysuseyourowneyes
toconfirmthevehicle’ssurroundings,asthedisplayedimagemaybenotwelllitornotentirelyvisible. Alwaysproceed
withcautionandperformdoubleͲchecksbefore
proceeding.
The area displayed by the Backup Camera is limited. It does not display objects that are close to or just below the
bumper,underneaththevehicle,orobjectsoutofthecamera’sview.Thecamera'sviewcanchangeaccordingtoyour
vehicle'sorientationontheroadorchanging
roadconditions.
Be sure to check the camera is properly functioning, is properly positioned and securely mounted, every time you
operateyourvehicle.
Makesureyourtrunkorhatchoperatescorrectly,asintended,beforeandafterinstallation.
Proceedwithcautionwhencleaning yourvehiclearoundthe
camera.Avoidexcesswaterexposure aroundthe camera
especiallywithsprayingorapowerwasher.
Pleasemakesuretokeepthecameracleanandunobstructedfromanydebris
Followalltrafficlawsandmotorvehicleregulations.
Consultlocallawsandregulationsforanyrestrictionsoninstallation
oruse.
UsingaBackupCameraSystemisnotadequateenoughtocompletelyeliminateavehicle’sblindspot.Alwaysremember
todrivewithcaution,followingalltrafficlaws.
Pleasereadallof the installationinstructionscarefullybeforeinstalling the product. Improperinstallationwillvoid
manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as
guidelines to assist in installing the system.Please consult an experienced technician if you are not comfortable
installing
theproduct. Prior tousingandinstalling theBackupCameraSystem, pleasereadthesafetyinformation
providedinthisuser manual.Besuretousetheproductasoutlinedinthisusermanual.Altercationormodifications
carriedoutwithoutappropriateauthorizationmayinvalidatetheuser'srighttooperatetheequipment.
SystemInstallationandWiring
Note:CameraSysteminstallationondieselvehiclesmayrequireaslightlydifferentwiringinstall.
QuickInstallation:
Thisrearviewbackupcamerasystemcomeswithcameraandinstallationwiring.Wheninstalling,thecameraispreferably
tobemountedintherearofyourvehicle(justabovethelicenseplate).
Thiskitincludesnecessarywiring andcableconnectoraccessoriessufficientfortypicalconnections.
However, additional accessory cables and installation materials may be necessary for completely
secureandoperationalbackupcameraperformance.
CameraConnection:
ConnectthecameratotheusingtheincludedDC12Vpowercable.ConnecttheDC12Vpowercabletothepositive12V
reverse tail light in the rear of your vehicle.Then, connect the black wire, of the DC 12V power cable, and gro und
properly. This connected power and ground cable
then connects to the camera, and will supply power to the camera
directly.
Next,usetheincludedyellowRCAvideoconnectorcable,andrunthatcablefromtheyellowRCAvideoconnectorjack of
thecamera,totheyellowvideoconnectorofyourcompatibledisplaymonitor
TheyellowRCAcablewhenconnected,automaticallyretrievesthevideosignalwhenactivated(whenyourvehicleisswitchedintothereversegear).
InstallationTranscript:
1.Locatethereversetaillightwiringbehindyourvehicle'sreverselight.Youmayneedtoremoveaninteriorpanel,orothercover,in
ordertolocatethewiring.Connecttheincludedpower12VDCpowercabletothereverselight.
a.Connectthepowercable'sRedwiretoyourvehicle's
reverselightpositivewire.
b.Connectthepowercable'sBlackwiretoyourvehicle'sreverselightnegativewire.

2.Connectthecameratothis'reverselight'connectioninstallation,thenmountthecamerainthedesiredlocation.
3.RuntheRCAvideocablefromthecameratoyourcompatiblevideodisplay
monitor.
*Please remember to run cables in the least obtrusive route possible.Vehicle vibrations and bumpy driving conditions can
result,soextracareshouldbetakentosecurelymountthecameraandfastenallcablesandwiringtosecurelocations.
*Ensurethewiresaresafelyandsecurelyconnected,withproperisolationappliedtoallconnections.
AdditionalNotes:
ͲDeterminethebestlocationforthecamera(Thecameraisprefer ably mountedjustabovethelicenseplate).
ͲBesurewhenrunningtheconnectioncablestoleaveasmallamountofslacksoyoucanstillmovethecameraaround
thelicenseplate,ifyoudecidetoslightly
adjustthecamera'spositioningatalatertime.
Ͳ After installation, Test thecamera before use.Placing yourvehicle in reverseshould provide apicture in the monitor
withintherearviewmirrorassembly.
Caution:Connecting to othertypes ofelectrical systemswill cause damage to yourvehicle. Please contact the manufacturer if youare
unawareofthesystemtypeinyourvehicle.Refertothemodel'spowerrequirementspriortoconnectionandinstallation.
M
o
P
o
del:
P
LC
M
M
22i
R
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Pyle PLCM22IR Owner's manual

Category
Security cameras
Type
Owner's manual

Pyle PLCM22IR is a backup camera system designed to assist drivers in detecting hazardous driving conditions, obstructions, and large stationary objects while reversing. It features a digital camera with low-lux lighting performance, providing enhanced visibility in low-light conditions. The system includes a yellow RCA video connector cable for easy connection to a compatible display monitor, automatically retrieving the video signal when the vehicle is shifted into reverse.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI