Foxconn 865M01 series User manual

Category
Server/workstation motherboards
Type
User manual

This manual is also suitable for

This manual is the intellectual property of Foxconn, Inc. Although the
information in this manual may be changed or modified at any time,
Foxconn does not obligate itself to inform the user of these changes.
Statement:
All trademarks are the property of their respective owners.
Intel
®
and Pentium
®
are registered trademarks of Intel Corporation.
PS/2 and OS/2 is the registered trademarks of IBM, Inc.
Windows
®
95/98/2000/NT/XP is the registered trademark of Microsoft.
Award
®
is the registered trademark of Award, Inc.
User’s Manual V1.3 in English for 865M01 series motherboard.
P/N:91-181-613-14-42
Symbol description:
Note: refers to important information that can help you to use motherboard
better.
Attention: indicates that it may damage hardware or cause data loss,
and tells you how to avoid such problems.
Warning: means that a potential risk of property damage or physical
injury exists.
More information:
If you want more information about our products, please visit Foxconn’s
website: www.foxconnchannel.com
Version:
Trademark:
865M01-English preface-v1.3-121603.p65 2004-5-27, 18:101
Item Checklist:
Thank for your purchasing Foxconn’s 865M01 series motherboard. Please check
the package; if there are missing or damaged items, contact your distributor as
soon as possible.
865M01 series motherboard (x1)
Foxconn Utility CD (x1)
User’s Manual (x1)
IDE Ribbon cable (x1)
FDD Ribbon cable (x1)
I/O Shield (x1)
S-ATA Signal Cable (x1) (optional)
S-ATA Power Cable (x1) (optional)
SPDIF Cable (x1) (optional)
USB 2.0 Cable (x1) (optional)
865M01-English preface-v1.3-121603.p65 2004-5-27, 18:102
Declaration of conformity
HON HAI PRECISION INDUSTRY COMPANY LTD
66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,
TAIPEI HSIEN, TAIWAN, R.O.C.
declares that the product
Motherboard
865M01 G/PE/GV series
is in conformity with
(reference to the specification under which conformity is declared in
accordance with 89/336 EEC-EMC Directive)
EN 55022/A1: 2000 Limits and methods of measurements of radio disturbance
characteristics of information technology equipment
EN 61000-3-2/A14:2000 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits for harmonic current emissions
(equipment input current <= 16A per phase)
EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits of voltage fluctuations and flicker in low-voltage
supply systems for equipment with rated current <= 16A
EN 55024/A1:2001 Information technology equipment-Immunity characteristics limits
and methods of measurement
Signature : Place / Date : TAIPEI/2003
Printed Name : James Liang Position/ Title : Assistant President
865M01-English preface-v1.3-121603.p65 2004-5-27, 18:103
Declaration of conformity
Trade Name: Foxconn
Model Name:
865M01 G/PE/GV
Responsible Party: PCE Industry Inc.
Address: 458 E. Lambert Rd.
Fullerton, CA 92835
Telephone: 714-738-8868
Facsimile: 714-738-8838
Equipment Classification: FCC Class B Subassembly
Type of Product: Motherboard
Manufacturer: HON HAI PRECISION INDUSTRY
COMPANY LTD
Address: 66 , CHUNG SHAN RD., TU-CHENG
INDUSTRIAL DISTRICT, TAIPEI HSIEN,
TAIWAN, R.O.C.
Supplementary Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions : (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Tested to comply with FCC standards.
Signature : Date : 2003
865M01-English preface-v1.3-121603.p65 2004-5-27, 18:104
Product Introduction
Main Features .............................................................................................. 2
865M01 Layout ............................................................................................ 5
Installation Instructions
CPU ............................................................................................................. 11
Memory ...................................................................................................... 16
Power Supply ............................................................................................ 21
Rear Panel Connectors .............................................................................. 22
Other Connectors ...................................................................................... 24
Expansion Slots ......................................................................................... 34
Jumpers ..................................................................................................... 37
BIOS Description
Enter BIOS Setup ....................................................................................... 42
Main menu ................................................................................................. 42
Standard CMOS Features ........................................................................... 44
BIOS Features Setup .................................................................................. 47
Advanced BIOS Features Setup ................................................................. 48
Advanced Chipset Features Setup ............................................................. 51
Integrated Peripherals ................................................................................. 53
Power Management Setup ......................................................................... 58
PnP/PCI Configuration ............................................................................... 61
PC Health Status ........................................................................................ 62
Frequency/Voltage Control ......................................................................... 63
Load Fail-Safe Defaults .............................................................................. 64
Load Optimized Defaults ............................................................................. 64
Set Supervisor/User Password ................................................................... 64
Save & Exit Setup ...................................................................................... 65
Exit Without Saving .................................................................................... 65
Table of Contents
Chapter
1
1
Chapter
2
2
Chapter
3
3
865M01-English preface-v1.3-121603.p65 2004-5-27, 18:105
6
6
Driver CD Introduction
Utility CD content ........................................................................................ 67
Start to install driver ................................................................................... 68
Install Chipset Software ............................................................................. 68
Install DirectX ............................................................................................. 69
Install VGA Driver (optional) ....................................................................... 70
Install USB2.0 Driver .................................................................................. 71
Using 4-/6-channel Audio ........................................................................... 71
Install LAN Driver (optional) ....................................................................... 78
Install Norton Internet Security 2004 .......................................................... 79
Directions for Bundled Software
SuperStep ................................................................................................. 81
SuperLogo ................................................................................................. 84
SuperUpdate .............................................................................................. 86
Special BIOS Functions
SuperSpeed ............................................................................................... 92
SuperBoot .................................................................................................. 93
SuperBIOS-Protect ..................................................................................... 94
SuperRecovery .......................................................................................... 95
Table of Contents
4
4
5
5
Chapter
Chapter
Chapter
865M01-English preface-v1.3-121603.p65 2004-5-27, 18:106
1. Attach the CPU and heatsink using silica gel to ensure full contact.
2. It is suggested to select high-quality, certified fans in order to avoid
damage to the motherboard and CPU due high temperatures.
3. Never turn on the machine if the CPU fan is not properly installed.
4. Ensure that the DC power supply is turned off before inserting or
removing expansion cards or other peripherals, especially when
you insert or remove a memory module. Failure to switch off the DC
power supply may result in serious damage to your system or
memory module.
Warning:
We cannot guarantee that your system will operate normally while
over-clocked. Normal operation depends on the over-clock capacity
of your device.
Warning:
Attention:
Since BIOS programs are upgraded from time to time, the BIOS
description in this manual is just for reference. We do not guarantee
that the content of this manual will remain consistent with the actual
BIOS version at any given time in the future.
Attention:
The pictures of objects used in this manual are just for your reference.
Please refer to the physical motherboard.
865M01-English preface-v1.3-121603.p65 2004-5-27, 18:107
This page is intentionally left blank
865M01-English preface-v1.3-121603.p65 2004-5-27, 18:108
Chapter
Thank you for buying Foxconn’s 865M01 series
motherboard. This series of motherboard is one of our new
products, and offers superior performance, reliability and
quality, at a reasonable price. This motherboard adopts the
advanced Intel
®
865 G/PE/GV+ICH5/5R chipset, providing us-
ers a computer platform with a high integration-compatibility-per-
formance price ratio.
This chapter includes the following information:
Main Features
865M01 Layout
1
1
Chapter 1 Product Introduction
2
865M01G/PE/GV User Manual
Main Features
Size
mATX form factor of 9.6 inch x 9.1 inch
Microprocessor
Supports Intel
®
Pentium
®
4 socket 478 (Willamette/Northwood/Prescott)
processors
Supports Intel
®
Celeron
®
socket 478 (Willamette/Northwood) processors
Supports FSB at 400MHz/533MHz/800MHz
Support Hyper-threading technology
Chipset
Intel
®
Springdale chipset: Intel 865G/PE/GV (NorthBridge) + ICH5/5R
(SouthBridge)
System Memory
Two 184-pin DIMM slots
Supports PC3200/2700/2100 memory
Supports 128/256/512 Mb technology up to 2GB
Supports Dual-channel DDR
USB 2.0 Ports:
Supports hot plug
Eight USB 2.0 ports (four rear panel ports, two onboard USB headers
providing four extra ports)
Supports wake-up from S1 and S3 mode
Supports USB 2.0 Protocol up to 480 Mbps transmission rate
Attention:
1. Use the same memory modules for Dual-channel.
2. The memory operating frequency is 320MHz while FSB800
CPU works with DDR333.
3
865M01G/PE/GV User Manual
Chapter 1 Product Introduction
Onboard Serial ATA
150MBps transfer rate
Supports two S-ATA devices, such as HDD, etc.
Onboard 1394 (Optional)
Support hot plug
With rate of transmission at 400Mbps
Self-configured addressing
Can connect with 2 independent 1394 units synchronously at most, such
as HDD, CD-ROM
Onboard LAN (Optional)
Supports 10/100Mbit/sec Ethernet
10/100M LAN interface built-in on board
Onboard Audio
AC’ 97 2.3 Specification Compliant
Supports S/PDIF output/input
Onboard Line-in jack, Microphone-in jack, Line-out jack
Supports 5.1 channels audio (setting via software)
Onboard Graphics
Supports integrated VGA display functions (Intel Extreme Graphics)
(supported on 865M01G/GV only)
Supports external AGP3.0/2.0 specification; supports 4X/8X display cards
(supported on 865M01G/PE only)
BIOS
Licensed advanced AWARD (Phoenix) BIOS, supports flash ROM, plug-and-
play
Supports IDE, CD-ROM, SCSI HDD and USB device boot up
Chapter 1 Product Introduction
4
865M01G/PE/GV User Manual
Green Function
Supports ACPI (Advanced Configuration and Power Interface)
Supports five system modes---- S0 (normal), S1 (power on suspend), S3
(suspend to RAM), S4 (Suspend to disk - depends on OS), and S5 (soft - off).
Expansion Slots
Three PCI slots
One AGP slot (supported on 865M01 G/PE only)
AGP 8X support:
AGP 8X (AGP 3.0) is the VGA interface specification that enabled enhanced
graphics performance with high handwidth speeds up to 2.12 GB/s.
Advanced Features
PCI 2.2 Specification Compliant
Supports Windows 98/2000/ME/XP soft-off
Supports Wake-on-LAN, Wake-on Modem function
Supports PC Health function (capable of monitoring system voltage, CPU,
system temperature, and fan speed)
5
865M01G/PE/GV User Manual
Chapter 1 Product Introduction
865M01 Layout
14
15
16
3 42
5
7
9
8
12 1113
10
1
6
Chapter 1 Product Introduction
6
865M01G/PE/GV User Manual
ATX 12V connector
This power connector connects the 4-pin 12V plug from the ATX 12V power
supply.
CPU socket
A 478-pin surface mount, Zero Insertion Force (ZIF) Socket for the intel
®
Pentium
®
4 processor (and Intel’s
future Prescott CPU) Supports 800/533/
400 MHz system bus and allows up to 6.4GB/s data transfer rates.
North bridge controller
The Intel
®
865G/GV Graphics Memory Controller Hub(GMCH) and the Intel
®
865PE Memory Controller Hub(MCH) provide the processor interface with
800/533/400 MHz frequency, system memory interface at 400/333/266MHz
operation, and 1.5V AGP interface that supports AGP 3.0 specification including
8X Fast Write protocol, the GMCH provides an integrated graphics accelerator.
DDR DIMM sockets
These two 184-pin DIMM sockets support up to 2GB system memory using
unbuffered non-ECC PC3200/2700/2100 DDR DIMMs.
Super I/O
The Winbond W83627HF Low Pin Count (LPC) interface provides the
commonly used Super I/O functionality. The chip supports a high-performance
floppy disk controller for a 360k/720K/1.44M/2.88M floppy disk drive, a multi-
mode parallel port, two serial ports, the mouse and keyboard interface and
the LPC (Low Pin Count) interface.
Floppy disk connector
This connector accommodates the provided ribbon cable for the floppy disk
drive. One side of the connector is slotted to prevent incorrect insertion of the
floppy disk cable.
ATX power connector
This 20-pin connector connects to an ATX power supply. The power supply
must have at least 1A on the +5V standby lead (+5VSB).
1
2
3
4
5
6
7
7
865M01G/PE/GV User Manual
Chapter 1 Product Introduction
IDE connectors
These 2-channel bus master IDE connectors support Ultra DMA 100/66/33,
PIO Modes 3 & 4 IDE devices. Both the primary (blue)and secondary (white)
connectors are slotted to prevent incorrect insertion of the IDE ribbon cable.
AGP slot
This Accelerated Graphics Port (AGP) slot supports 1.5V AGP8X mode graphic
card for 3D graphical applications.
Serial ATA connectors
These two 7-pin connectors accommodate the thin cables for Serial ATA
devices.
Flash ROM
This 4Mb flash ROM contains the programmable BIOS program.
South bridge
The Intel ICH5/5R are subsystem that integrate various I/O functions including
2-channel ATA100 bus master IDE controller, SATA RAID controller (Supported
by ICH5R only), up to eight USB 2.0/1.1 ports, I/O APIC ,AC’97 2.3 interface,
and PCI 2.2 interface.
PCI Slots
These three 32-bit PCI 2.2 expansion slots support bus master PCI cards
like SCSI or LAN cards with 133MB/s maximum throughput.
1394 controller (optional)
VT6307 is the controller for IEEE1394a on Motherboard. The VT6307 is a
complete small package single chip PCI solution at 400Mbps, low power
seamless plug and play connections to the latest IEEE 1394 enabled devices.
10/100M LAN controller (optional)
The RTL8101L is a single-chip solution for LAN On Motherboard (LOM)
applications. The RTL8101L supports 10/100 Mbps data transfer rate.
8
9
10
11
12
13
14
15
Chapter 1 Product Introduction
8
865M01G/PE/GV User Manual
Audio CODEC
The ALC655 is an AC’97 CODEC that allows 6-channel audio playback. The
audio CODEC provides six DAC for 5.1 surround sound, S/PDIF output, CD-
IN, Line-in, Line-out and Micphone.
16
9
865M01G/PE/GV User Manual
Chapter 1 Product Introduction
This chapter introduces the hardware installation process,
including the installation of the CPU and memory. It also ad-
dresses the connection of your power supply, use of the rear
panel connectors, connection of hard drive and floppy drive data
cables, and setting up various other feature of the motherboard.
Caution should be exercised during the installation process.
Please refer to the motherboard layout prior to any installation
and read the contents in this chapter carefully.
This chapter includes the following information:
CPU
Memory
Power supply
Rear Panel Connectors
Other Connectors
Expansion Slots
Jumpers
Chapter
2
2
Chapter 1 Product Introduction
10
865M01G/PE/GV User Manual
Notes:
Take note of the following precautions before you install compo-
nents or change settings.
1. Use a grounded wrist strap or touch a safely grounded object,
such as an attached power supply, before handling components
to avoid damaging them due to static electricity.
2. Unplug the power cord before opening your chassis or touching
any component.
3. Hold components by their edges to avoid touching any exposed
integrated circuits (ICs).
4. Whenever you uninstall a component, place it on a grounded
anti-static pad or into the anti-static bag that it came in.
Chapter 2 Installation Instructions
11
865M01G/PE/GV User Manual
CPU
This motherboard accepts Intel socket 478 processors (CPUs) with a front side
bus (FSB) of 400/533/800 MHz Processors with Hyper-Threading technology
are supported.
Installation of CPU
Follow these steps to install a CPU.
1. Unlock the socket by pressing the
lever sideways, then lift it up to a 90
0
angle.
2. Align the cut edge to the gap in the
base of the socket. Carefully insert
the CPU into the socket until it fits in
place.
3. When the CPU is in place, press it
firmly on the socket while you push
down the socket lever to secure the
CPU. The lever clicks on the side tab
to indicate that it is locked.
Cut edge
90°
Gap in the base
Push down the socket
lever to secure the CPU.
Attention:
The CPU pins must be properly aligned with the holes in the
socket, otherwise the CPU may be damaged.
Chapter 2 Installation Instructions
12
865M01G/PE/GV User Manual
1. Locate the CPU retention mecha-
nism base (surrounds the CPU
socket).
3. Attach the fan to the base.
Installation of CPU Fan
New technology allows processors to run at higher and higher frequencies. To
avoid problems arising from high-speed operation, for example, overheating,
you need to install the proper fan. The following procedures are provided for
reference only, please refer your CPU fan user guide to install it.
2. If required, apply a light coating
of silica gel to the top of the CPU.
NOTE: The CPU heatsink may have a
pre-applied thermal compound. In that
case, the silica gel is not required.
4. Connect the power fan’s power
cable to the appropriate 3-pin
connector on the motherboard.
Note :
Excessive temperatures will severely damage the CPU and
system. Therefore, make sure that the cooling fan works normally
at all times in order to prevent overheating and damaging to the
CPU.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111

Foxconn 865M01 series User manual

Category
Server/workstation motherboards
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI