Matsui L7MDPF09 User manual
- Category
- Digital photo frames
- Type
- User manual
7" Digital Photo Frame
INSTRUCTION MANUAL
L7MDPF09
Photo Mode Clock & Calendar Setup Menu Troubleshooting
and Speci cation
Preparations
Product
Overview
Safety Warnings
and Contents
GB-2
Safety Warnings
When using electrical appliances, basic safety precautions should always be
followed, including the following:
Read all the instructions and retain this instruction manual.
Ensure that all electrical connections (including the mains adapter and power
cable) are properly made and in accordance with
the manufacturer’s
instructions.
Switch off and withdraw the mains adapter before making or changing
connections.
Consult your dealer if you are ever in doubt about the installation, operation or
safety of your unit.
Do not allow the unit to be exposed to dripping or splashing.
Never store in hot or very cold areas. Recommended operating temperature is
0~40°C.
Do not use the unit in areas with high moisture (e.g. bathroom) or dusty areas.
Do not place hot objects or naked ame sources such as lighted candles or night
lights on or close to the unit. High temperatures can melt plastic and lead to res.
Do not obstruct the ventilation openings of the unit with items such as
newspapers, tablecloths, curtains, etc. Overheating will cause damage and
shorten the life of the unit.
Do not handle the power cable with wet hands.
Be careful with the LCD panels on the unit.
Only use attachments/accessories speci ed by the manufacturer.
When the unit is not in use or unattended for a long period of time, disconnect it
from the mains socket.
Do not remove any xed cover as this may expose dangerous voltages.
Do not continue to operate the unit if you are in any doubt about it working
normally, or if it is damaged in any way - switch o , withdraw the mains adapter
and consult your dealer.
Never let anyone especially children push anything into holes, slots or any other
opening on the case - this could result in a fatal electrical shock.
Route the power cable so that it is not likely to be walked on, crushed, chafed, or
subjected to excessive wear, tear or heat.
Note about LCD screen
The LCD screen is manufactured using high-precision technology. However, some
tiny black points and/or bright points (red, blue or green in colour) may constantly
appear on the LCD screen. These points are generated in the manufacturing
process and are normal.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Photo ModeClock & CalendarSetup MenuTroubleshooting
and Speci cation
Preparations
Product
Overview
Safety Warnings
and Contents
GB-3
Contents
Safety Warnings ........................................................................................... 2
Contents..................................................................................................... 3
Introduction...................................................................................................... 4
Unpacking the Photo Frame........................................................................... 4
Product Overview ....................................................................................................... 5
Preparations .......................................................................................................... 6
- Attaching the Stand ......................................................................................... 6
- Storing the Stand ......................................................................................... 6
- Placing the Photo Frame ......................................................................................... 6
- Using 4-direction button ......................................................................................... 6
- Inserting a Memory Card or USB Flash Drive..................................... 7
- Connecting to the Mains Power............................................................... 7
Selecting the Memory Drive................................................................................. 8
Viewing Photos and Slidshows ............................................................................... 8
- Thumbnail Mode ......................................................................................................... 8
- Rotation ........................................................................................................................ 9
Clock and Calendar ................................................................................................. 10
- Display Mode .................................................................................................................. 11
Setup Menu .................................................................................................. 12
Troubleshooting .............................................................................................. 14
Speci cations ................................................................................................. 15
Photo Mode Clock & Calendar Setup Menu Troubleshooting
and Speci cation
Preparations
Product
Overview
Safety Warnings
and Contents
GB-4
1. Digital Photo Frame
Unpacking the Photo Frame
2. Mains Adapter
3. Instruction manual 4. Photo Frame Stand
Introduction
Thank you for purchasing this 7" Digital Photo Frame. You can display your
favourite images (JPEG) directly from a memory card or a USB thumb drive without
a computer. Read the following instructions for more details.
(43-111-00254)
(82-331-00010)
(60-331-C0301)
Remove all packaging from the digital photo frame. Retain the packaging. If you
dispose it please do so according to local regulations.
If items are missing or damaged, please contact partmaster (UK only).
Tel: 0870 6001 338 for assistance.
7" Digital Photo Frame
INSTRUCTION MANUAL
L7MDPF09
Photo ModeClock & CalendarSetup MenuTroubleshooting
and Speci cation
Preparations
Product
Overview
Safety Warnings
and Contents
GB-5
Product Overview
Name Description
1
(RIGHT)/ (Next)
button
To move right in the menu / thumbnail / option
settings
To display the next photo
•
•
2
(UP)/
(Rotate)
button
To move up in the menu / thumbnail / option
settings
To rotate the photo by 90° clockwise
•
•
3
(Stop)/(MODE)
button
To stop playback of slideshow
To enter the thumbnail mode
To return to the main menu
•
•
•
4
(Play/Pause)/SEL.
button
To start/pause the sildeshow
To con rm a setting or function
•
•
5
(LEFT)/ (Previous)
button
To move left in the menu / thumbnail / option
settings
To display the previous photo
•
•
6
(DOWN)/
(Brightness) button
To move down in the menu / thumbnail / option
settings
To adjust the brightness
•
•
7 USB Port To accommodate USB devices such as portable USB
ash drives or ash memory card readers
•
8 Stand receptacle To attach the supplied stand•
9 DC IN Jack To connect to the mains power•
10 Security lock slot To lock the unit for security. This slot is compatible
with some notebook locking device (not supplied)
•
11 SD/MMC/MS/xD Slot To accommodate SD, MMC, MS and xD cards•
12 Stand storage com-
partment
To store the supplied stand•
13 Wall mounting hole For wall-mount viewing purpose•
MSSD / MMC
2 1
3
4
5
6
7
9
8
10
11
12
13
Photo Mode Clock & Calendar Setup Menu Troubleshooting
and Speci cation
Preparations
Product
Overview
Safety Warnings
and Contents
GB-6
Attaching the Stand
Preparations
The photo frame can be placed vertically
or horizontally for either landscape or
portrait display.
1. Insert the joint end of the stand into
the receptacle.
2. Turn the stand clockwise as shown
until the stand locks in place.
Placing the Photo Frame
Landscape viewing Portrait viewing
MSSD / MMC
MSSD / MMC
MSSD / MMC
Storing the Stand
MSSD / MMC
Insert the stand into the stand storage
compartment as shown until it is xed
in place.
Using 4-direction button
To use
the 4-direction button, press on
top of concave markings ( / /
/
) with your nger tip to move /
/ / in the menu / thumbnail /
option settings.
Photo ModeClock & CalendarSetup MenuTroubleshooting
and Speci cation
Preparations
Product
Overview
Safety Warnings
and Contents
GB-7
Inserting a Memory Card or USB Flash Drive
This photo frame can only play images (JPEG). If les in other formats are played,
please use your computer to convert the images to a readable format.
Inserting Memory Card
• Insert your memory card into the
appropriate slot according to the
orientation marked on the photo
frame.
Inserting USB Flash Drive
• Insert a USB drive to the USB port.
This unit does not support any external hard disk and MP3 player connection
via USB port.
• Connect the supplied mains adapter
(5V, 1.0A) to the DC IN jack and then
plug the other end to the mains
socket.
To remove SD/MMC/MS/xD card, pull
the card straight out.
This device can only display one
storage media’s contents at a time. If
more than one storage media is used,
please refer to "Selecting the Memory
Drive" section on page 8.
Connecting to the Mains Power
MSSD / MMC
SD
MMC
MS
MSSD / MMC MSSD / MMC
Photo Mode Clock & Calendar Setup Menu Troubleshooting
and Speci cation
Preparations
Product
Overview
Safety Warnings
and Contents
GB-8
Viewing Photos and Slidshows
1. Select a memory drive in the main menu as described in “Selecting the Memory
Drive“
2. Press
or button to select “Photo” in the main menu, then press /SEL.
button.
3. The slideshow will start to play.
4. To pause the slideshow, press
/SEL. button.
• When the photo frame does not operate for few seconds at the main menu, the
screen saver will be activated. Press any button to return to the main menu.
• Displaying pictures bigger than 480 x 234 will take a longer time for loading.
Selecting the Memory Drive
1. Press button to display the main menu screen.
2. Press or button to select SD/MMC/MS/xD card (
), USB ash drive ( ) in
the main menu. Then press
/SEL. button to conf
i
rm.
Thumbnail Mode
1. Press button on the photo frame
during the slideshow to enter the
thumbnail mode.
2. Press or or or to select the
photo you wish to play, then press
/SEL. button .
3. The slideshow starts to play with the
photo selected.
SD/MMC/MS/xD card
USB ash drive
Photo
Photo
17-1.JPG
800x522
63.5KB
1/6
Photo ModeClock & CalendarSetup MenuTroubleshooting
and Speci cation
Preparations
Product
Overview
Safety Warnings
and Contents
GB-9
Press LEFT or RIGHT button to select
the photo you wish to rotate, then
press
button on the photo frame to
rotate by 90° in clockwise direction.
Rotation
• Each press of the button will rotate the photo by 90° in a clockwise
direction.
• All the rotation e ects will be cancelled after exiting the slideshow mode.
• If the thumbnail has more than one page, press or button repeatedly to
turn to the next page. Press
or button repeatedly to return to the previous
page.
• Refer to the Setup Menu section on Page 12 to set up the slideshow settings.
• Press button again to return to the main menu.
Photo Mode Clock & Calendar Setup Menu Troubleshooting
and Speci cation
Preparations
Product
Overview
Safety Warnings
and Contents
GB-10
Clock and Calendar
Clock & Calendar
1. Press or button to select “Clock & Calendar” from the Main menu.
2. Press
/SEL. button to enter the Clock & Calendar mode.
• Refer to the Setup Menu section on Page 13 to select a Display Mode, and
set the time and date.
• The date and time setting memory will last around 2 days (or 48 hours)
after the unit is disconnected from the power outlet.
Photo ModeClock & CalendarSetup MenuTroubleshooting
and Speci cation
Preparations
Product
Overview
Safety Warnings
and Contents
GB-11
Display Mode
1. Press /SEL. button to change to
Monthly Calendar, Calendar, and
Clock.
2. Press
or button to preview the
previous or next month.
12 : 09 : 45
January 2009
Sun Mon Tue Wed Thu Fri Sat
1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31
Monthly Calendar Mode
12 : 09 : 45
2009
January
1
Thursday
Calendar Mode
January 2009
Sun Mon Tue Wed Thu Fri Sat
1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31
Clock Mode
• In Monthly Calendar and Calen-
dar mode, the photo slideshow
will be played back when a
memory device with available
pictures has been inserted to the
photo frame. Press
or to
view the previous or next photo.
• The calendar will return to the
current month after pressing
button. Press button again to
return to the main menu.
Photo Mode Clock & Calendar Setup Menu Troubleshooting
and Speci cation
Preparations
Product
Overview
Safety Warnings
and Contents
GB-12
To leave the Setup Menu, press button.
1. Press or button to select
“Setup” from the Main menu, then
press
/SEL. button.
2. Press or button to select System,
Photo, or Clock&Calendar settings
then press press
/SEL. button.
3. Press or to highlight an item
from OSD menus, then press or
or button to select an item from the
submenu as below table.
4. Press
/SEL. button to con rm.
OSD menus Sub-menus Description of operations
System Settings
Brightness -4~+4 Adjust the panel’s brightness.
Contrast -4~+4 Adjust the panel’s contrast.
Language English, Français,
Deutsch, Italiano,
Español, Português,
Nederlands, Polski
Select a preferred language to show on
the screen.
Default Reset Restore the factory default settings.
Photo Settings
Panel Full Screen, Original • Select “Full Screen” to play the photos in
full screen. (If the non 16:10 images is
displayed, it will cause the image distor-
tion when selecting the "Full Screen").
• Select “Original” for playing a conven-
tional aspect ratio of images. Black
bands will appear on left and right
screen with a landscape viewing, or top
and bottom with a portrait viewing.
Interval Time 5 Sec., 15 Sec., 30
Sec., 1 Min., 5 Min., 30
Min., 1 Hour, 4 Hour,
12 Hour, 1 Day
Set up the transition e ect.
Setup
Setup Menu
Photo ModeClock & CalendarSetup MenuTroubleshooting
and Speci cation
Preparations
Product
Overview
Safety Warnings
and Contents
GB-13
Transition E ect Random, None,
Block, Swirl,
Cross Line, Matrix,
Shu es lines, Blinds,
Wipe across, Push in
Push out, Cube
Set up the transition e ect.
Calendar Settings
Display Mode Monthly Calendar,
Calendar, Clock
Select a display mode for the Calendar
and Clock.
Date Day/Month/Year
Set up the date by pressing
or or
or
button.
Clock Mode 12-hour, 24-hour Select 12-hour or 24-hour notation you
wish to display on this photo frame.
Clock Time Hour:Minute
Set up the time by pressing
or or
or button.
Photo Mode Clock & Calendar Setup Menu Troubleshooting
and Speci cation
Preparations
Product
Overview
Safety Warnings
and Contents
GB-14
Troubleshooting
No power
• Check to make sure the mains plug is plugged into the mains sockets.
• Make sure there is power in the mains socket.
Unable to view photos on the Digital Photo Frame
• Not all JPEG files are compatible. Please open the files in the computer and
resave them as JPEG les and then try to playback in the photo frame.
• Check if the memory card is compatible .
If the picture display is distorted or cannot display properly
• Go to the setup menu, then the panel setting and change the aspect ratio to
match your photo. Crop to Fill, Full Screen or Original
If picture display seems slow
• Use lower resolution pictures.
The settings is lost
• The date and time setting memory will last around 2 days (or 48 hours) after
the unit is disconnected from the power outlet.
The photo frame does not work properly
• Please switch o the photo frame and on again.
Photo ModeClock & CalendarSetup MenuTroubleshooting
and Speci cation
Preparations
Product
Overview
Safety Warnings
and Contents
GB-15
Speci cations
Display
7" Colour TFT LCD Panel
View Area
450 X 234 pixels, 16:10 ratio
Button (6) Left/Previous, Right/Next, Down/Brightness, Up/Rotate,
Stop/Mode, Play/Pause/Select
Brightness
150
Contrast
150:1
Stand Design
Detachable (for Portrait and Landscape)
Memory Card Slot
SD/ SDHC/ MMC/ MS/ MS Pro
Supported Max
Memory Size:
SD: 4G
MMC: 2G
MS: 512M
MS Pro Duo: 8G
USB: 4G
File Format
JPEG
Power Adapter
5V / 1.0A
OSD Language
English, French, German, Italian, Spanish, Portuguese, Dutch,
Polish
Dimensions 200 x 132.8 x 83.7 mm (with stand)
Weight
340g
Visit Partmaster.co.uk today for the easiest way to
buy electrical spares and accessories.
With over 1 million spares and accessories available we can
deliver direct to your door the very next day.
Visit www.partmaster.co.uk
or call
0870 6001 338
(UK customers only)
Calls charged at National Rate.
Note: If you require a replacement for any of the items listed below,
please quote their corresponding part numbers:
Instruction Manual 82-331-00010
Mains Adapter 43-111-00254
Photo Frame Stand 60-331-C0301
This symbol on the product or in the instructions means that your
electrical and electronic equipment should be disposed at the end
of its life separately from your household waste. There are separate
collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer
where you purchased the product.
82-331-00010
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Matsui L7MDPF09 User manual
- Category
- Digital photo frames
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI